At Interrupt status register, Bit9 is Data Read Timeout. But we used macro name as the DTO. It could be confused with the Data Transfer Over(DTO)-Bit[3]. it's clearly that is changed the DRTO instead of DTO.
Signed-off-by: Jaehoon Chung <[email protected]> --- drivers/mmc/host/dw_mmc.c | 4 ++-- drivers/mmc/host/dw_mmc.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index b10e5e1..7dca5e9 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -39,7 +39,7 @@ #include "dw_mmc.h" /* Common flag combinations */ -#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ +#define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DRTO | SDMMC_INT_DCRC | \ SDMMC_INT_HTO | SDMMC_INT_SBE | \ SDMMC_INT_EBE) #define DW_MCI_CMD_ERROR_FLAGS (SDMMC_INT_RTO | SDMMC_INT_RCRC | \ @@ -1093,7 +1093,7 @@ static void dw_mci_tasklet_func(unsigned long priv) status = host->data_status; if (status & DW_MCI_DATA_ERROR_FLAGS) { - if (status & SDMMC_INT_DTO) { + if (status & SDMMC_INT_DRTO) { data->error = -ETIMEDOUT; } else if (status & SDMMC_INT_DCRC) { data->error = -EILSEQ; diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 0b74189..2f52c87 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -98,7 +98,7 @@ #define SDMMC_INT_HLE BIT(12) #define SDMMC_INT_FRUN BIT(11) #define SDMMC_INT_HTO BIT(10) -#define SDMMC_INT_DTO BIT(9) +#define SDMMC_INT_DRTO BIT(9) #define SDMMC_INT_RTO BIT(8) #define SDMMC_INT_DCRC BIT(7) #define SDMMC_INT_RCRC BIT(6) -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
