This patch fixes the HC ctrl_2 programming where, in case of SDR104 and HS200, we have to write 100b in the the UHS Mode bits. We wrote 101b that is reserved from Arasan Specs.
Reported-by: Youssef Triki <[email protected]> Signed-off-by: Giuseppe Cavallaro <[email protected]> --- drivers/mmc/host/sdhci.c | 7 +++---- 1 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b8bb3b3..ae745ab 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1526,16 +1526,15 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); /* Select Bus Speed Mode for host */ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; - if (ios->timing == MMC_TIMING_MMC_HS200) - ctrl_2 |= SDHCI_CTRL_HS_SDR200; + if ((ios->timing == MMC_TIMING_MMC_HS200) || + (ios->timing == MMC_TIMING_UHS_SDR104)) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; else if (ios->timing == MMC_TIMING_UHS_SDR12) ctrl_2 |= SDHCI_CTRL_UHS_SDR12; else if (ios->timing == MMC_TIMING_UHS_SDR25) ctrl_2 |= SDHCI_CTRL_UHS_SDR25; else if (ios->timing == MMC_TIMING_UHS_SDR50) ctrl_2 |= SDHCI_CTRL_UHS_SDR50; - else if (ios->timing == MMC_TIMING_UHS_SDR104) - ctrl_2 |= SDHCI_CTRL_UHS_SDR104; else if (ios->timing == MMC_TIMING_UHS_DDR50) ctrl_2 |= SDHCI_CTRL_UHS_DDR50; sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); -- 1.7.4.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
