As with gpio, uart and others, allow specifying the name_idx via the
aliases-node in the devicetree.
On embedded devices, there is often a combination of removable (e.g.
SD card) and non-removable mmc devices (e.g. eMMC).
Therefore the name_idx might change depending on
- host of removable device
- removable card present or not
This makes it difficult to hard code the root device, if it is on the
non-removable device. E.g. if SD card is present eMMC will be mmcblk1,
if SD card is not present at boot, eMMC will be mmcblk0.
If the aliases-node is not found, the driver will act as before.
Signed-off-by: Steffen Trumtrar <[email protected]>
---
drivers/mmc/card/block.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index cd0b7f4..5853c59 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -35,6 +35,7 @@
#include <linux/capability.h>
#include <linux/compat.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
#include <linux/mmc/ioctl.h>
#include <linux/mmc/card.h>
@@ -2005,7 +2006,11 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct
mmc_card *card,
* index anymore so we keep track of a name index.
*/
if (!subname) {
- md->name_idx = find_first_zero_bit(name_use, max_devices);
+ ret = of_alias_get_id(card->host->parent->of_node, "mmc");
+ if (ret < 0)
+ md->name_idx = find_first_zero_bit(name_use,
max_devices);
+ else
+ md->name_idx = ret;
__set_bit(md->name_idx, name_use);
} else
md->name_idx = ((struct mmc_blk_data *)
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
