There is no need for every driver to fetch a pinctrl handle and to select the default state. Instead this is handled by the device driver core, thus we can remove this piece of code from mmci.
Signed-off-by: Ulf Hansson <[email protected]> Cc: Linus Walleij <[email protected]> --- drivers/mmc/host/mmci.c | 17 ----------------- drivers/mmc/host/mmci.h | 4 ---- 2 files changed, 21 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index c3785ed..5dffbbd 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1510,23 +1510,6 @@ static int mmci_probe(struct amba_device *dev, mmc->f_max = min(host->mclk, fmax); dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max); - host->pinctrl = devm_pinctrl_get(&dev->dev); - if (IS_ERR(host->pinctrl)) { - ret = PTR_ERR(host->pinctrl); - goto clk_disable; - } - - host->pins_default = pinctrl_lookup_state(host->pinctrl, - PINCTRL_STATE_DEFAULT); - - /* enable pins to be muxed in and configured */ - if (!IS_ERR(host->pins_default)) { - ret = pinctrl_select_state(host->pinctrl, host->pins_default); - if (ret) - dev_warn(&dev->dev, "could not set default pins\n"); - } else - dev_warn(&dev->dev, "could not get default pinstate\n"); - /* Get regulators and the supported OCR mask */ mmc_regulator_get_supply(mmc); if (!mmc->ocr_avail) diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 69080fa..168bc72 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -200,10 +200,6 @@ struct mmci_host { struct sg_mapping_iter sg_miter; unsigned int size; - /* pinctrl handles */ - struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; - #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ struct dma_chan *dma_current; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
