Some switch operations like poweroff notify, shall according to the
spec not be followed by any other new commands. For these cases and
when the host does'nt support MMC_CAP_WAIT_WHILE_BUSY, we must not
send status commands to poll for busy detection. Instead wait for
the stated timeout from the EXT_CSD before completing the request.

Signed-off-by: Ulf Hansson <[email protected]>
Cc: Jaehoon Chung <[email protected]>
---

Changes in v2:
        Rebase towards latest mmc-next.

---
 drivers/mmc/core/core.c    |    2 +-
 drivers/mmc/core/mmc.c     |    6 +++---
 drivers/mmc/core/mmc_ops.c |   23 ++++++++++++++++++-----
 include/linux/mmc/core.h   |    3 ++-
 4 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 006ead2..0292ad4 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -301,7 +301,7 @@ void mmc_start_bkops(struct mmc_card *card, bool 
from_exception)
        }
 
        err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-                       EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal);
+                       EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal, true);
        if (err) {
                pr_warn("%s: Error %d starting bkops\n",
                        mmc_hostname(card->host), err);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 6d02012..8f0c516 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1404,9 +1404,9 @@ static int mmc_poweroff_notify(struct mmc_card *card, 
unsigned int notify_type)
        if (notify_type == EXT_CSD_POWER_OFF_LONG)
                timeout = card->ext_csd.power_off_longtime;
 
-       err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-                        EXT_CSD_POWER_OFF_NOTIFICATION,
-                        notify_type, timeout);
+       err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+                       EXT_CSD_POWER_OFF_NOTIFICATION,
+                       notify_type, timeout, true, false);
        if (err)
                pr_err("%s: Power Off Notification timed out, %u\n",
                       mmc_hostname(card->host), timeout);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 37f7d70..aae8d8b 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -404,11 +404,12 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
  *     @timeout_ms: timeout (ms) for operation performed by register write,
  *                   timeout of zero implies maximum possible timeout
  *     @use_busy_signal: use the busy signal as response type
+ *     @send_status: send status cmd to poll for busy
  *
  *     Modifies the EXT_CSD register for selected card.
  */
 int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
-              unsigned int timeout_ms, bool use_busy_signal)
+               unsigned int timeout_ms, bool use_busy_signal, bool send_status)
 {
        int err;
        struct mmc_command cmd = {0};
@@ -454,14 +455,26 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, 
u8 value,
 
        timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
        do {
-               err = __mmc_send_status(card, &status, ignore_crc);
-               if (err)
-                       return err;
+               if (send_status) {
+                       err = __mmc_send_status(card, &status, ignore_crc);
+                       if (err)
+                               return err;
+               }
                if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
                        break;
                if (mmc_host_is_spi(card->host))
                        break;
 
+               /*
+                * We are not allowed to issue a status command and the host
+                * does'nt support MMC_CAP_WAIT_WHILE_BUSY, then we can only
+                * rely on waiting for the stated timeout to be sufficient.
+                */
+               if (!send_status) {
+                       mmc_delay(timeout_ms);
+                       return 0;
+               }
+
                /* Timeout if the device never leaves the program state. */
                if (time_after(jiffies, timeout)) {
                        pr_err("%s: Card stuck in programming state! %s\n",
@@ -488,7 +501,7 @@ EXPORT_SYMBOL_GPL(__mmc_switch);
 int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
                unsigned int timeout_ms)
 {
-       return __mmc_switch(card, set, index, value, timeout_ms, true);
+       return __mmc_switch(card, set, index, value, timeout_ms, true, true);
 }
 EXPORT_SYMBOL_GPL(mmc_switch);
 
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index a00fc49..87079fc 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -151,7 +151,8 @@ extern int mmc_app_cmd(struct mmc_host *, struct mmc_card 
*);
 extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
        struct mmc_command *, int);
 extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
-extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool);
+extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
+                       bool);
 extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
 extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to