Looks good to me. Acked-by: Jaehoon Chung <[email protected]>
Best Regards, Jaehoon Chung On 02/12/2014 09:10 AM, Puthikorn Voravootivat wrote: > Remove MMC_CAP_ERASE from all host as it does not make > sense that the eMMC/SD device erase feature should be > controlled by the host cap. This make trim and/or discard > feature usable in the supported eMMC/SD device. > > Signed-off-by: Puthikorn Voravootivat <[email protected]> > --- > Resend to ux500 maintainer > > v4 change: > Change commit message to mention SD cards. > > v3 change: > As suggested by Jaehoon, this patch remove MMC_CAP_ERASE instead of > force enable it. > > v2 change: > Instead of add MMC_CAP_ERASE just only for dw_mmc, this patch adds > this capability to all host. > > arch/arm/mach-ux500/board-mop500-sdi.c | 3 --- > drivers/mmc/core/core.c | 6 ++---- > drivers/mmc/host/omap_hsmmc.c | 2 +- > drivers/mmc/host/sdhci.c | 2 +- > include/linux/mmc/host.h | 1 - > 5 files changed, 4 insertions(+), 10 deletions(-) > > diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c > b/arch/arm/mach-ux500/board-mop500-sdi.c > index fcbf3a1..6d9feb8 100644 > --- a/arch/arm/mach-ux500/board-mop500-sdi.c > +++ b/arch/arm/mach-ux500/board-mop500-sdi.c > @@ -48,7 +48,6 @@ struct mmci_platform_data mop500_sdi0_data = { > .capabilities = MMC_CAP_4_BIT_DATA | > MMC_CAP_SD_HIGHSPEED | > MMC_CAP_MMC_HIGHSPEED | > - MMC_CAP_ERASE | > MMC_CAP_UHS_SDR12 | > MMC_CAP_UHS_SDR25, > .gpio_wp = -1, > @@ -119,7 +118,6 @@ struct mmci_platform_data mop500_sdi2_data = { > MMC_CAP_8_BIT_DATA | > MMC_CAP_NONREMOVABLE | > MMC_CAP_MMC_HIGHSPEED | > - MMC_CAP_ERASE | > MMC_CAP_CMD23, > .gpio_cd = -1, > .gpio_wp = -1, > @@ -154,7 +152,6 @@ struct mmci_platform_data mop500_sdi4_data = { > MMC_CAP_8_BIT_DATA | > MMC_CAP_NONREMOVABLE | > MMC_CAP_MMC_HIGHSPEED | > - MMC_CAP_ERASE | > MMC_CAP_CMD23, > .gpio_cd = -1, > .gpio_wp = -1, > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > index 098374b..82de9f1 100644 > --- a/drivers/mmc/core/core.c > +++ b/drivers/mmc/core/core.c > @@ -2007,8 +2007,7 @@ int mmc_erase(struct mmc_card *card, unsigned int from, > unsigned int nr, > { > unsigned int rem, to = from + nr; > > - if (!(card->host->caps & MMC_CAP_ERASE) || > - !(card->csd.cmdclass & CCC_ERASE)) > + if (!(card->csd.cmdclass & CCC_ERASE)) > return -EOPNOTSUPP; > > if (!card->erase_size) > @@ -2062,8 +2061,7 @@ EXPORT_SYMBOL(mmc_erase); > > int mmc_can_erase(struct mmc_card *card) > { > - if ((card->host->caps & MMC_CAP_ERASE) && > - (card->csd.cmdclass & CCC_ERASE) && card->erase_size) > + if ((card->csd.cmdclass & CCC_ERASE) && card->erase_size) > return 1; > return 0; > } > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c > index dbd32ad..99d8558 100644 > --- a/drivers/mmc/host/omap_hsmmc.c > +++ b/drivers/mmc/host/omap_hsmmc.c > @@ -1873,7 +1873,7 @@ static int omap_hsmmc_probe(struct platform_device > *pdev) > mmc->max_seg_size = mmc->max_req_size; > > mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | > - MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE; > + MMC_CAP_WAIT_WHILE_BUSY; > > mmc->caps |= mmc_slot(host).caps; > if (mmc->caps & MMC_CAP_8_BIT_DATA) > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index 9ddef47..6a50141 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -2943,7 +2943,7 @@ int sdhci_add_host(struct sdhci_host *host) > > mmc->max_discard_to = (1 << 27) / host->timeout_clk; > > - mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23; > + mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_CMD23; > > if (host->quirks & SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12) > host->flags |= SDHCI_AUTO_CMD12; > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > index 99f5709..8b1bfab 100644 > --- a/include/linux/mmc/host.h > +++ b/include/linux/mmc/host.h > @@ -242,7 +242,6 @@ struct mmc_host { > #define MMC_CAP_AGGRESSIVE_PM (1 << 7) /* Suspend (e)MMC/SD at > idle */ > #define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ > #define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is > busy */ > -#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim > commands */ > #define MMC_CAP_1_8V_DDR (1 << 11) /* can support */ > /* DDR mode at 1.8V */ > #define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
