On 7 March 2014 15:36, Seungwon Jeon <[email protected]> wrote:
> Power class is changed once only after selection of bus modes
> including speed and bus-width finishes finally.
>
> Signed-off-by: Seungwon Jeon <[email protected]>
> ---
> Changes in v2:
> Cleaned up some unnecessary codes.
>
> drivers/mmc/core/mmc.c | 94 +++++++++++++++++++++++++++--------------------
> 1 files changed, 54 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 0abece0..88ff217 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -737,17 +737,13 @@ static inline unsigned int mmc_snoop_ddr(struct
> mmc_card *card)
> * extended CSD register, select it by executing the
> * mmc_switch command.
> */
> -static int mmc_select_powerclass(struct mmc_card *card,
> - unsigned int bus_width)
> +static int __mmc_select_powerclass(struct mmc_card *card,
> + unsigned int bus_width)
> {
> int err = 0;
> unsigned int pwrclass_val = 0;
> - struct mmc_host *host;
> -
> - BUG_ON(!card);
> -
> - host = card->host;
> - BUG_ON(!host);
> + struct mmc_host *host = card->host;
> + struct mmc_ext_csd *ext_csd = &card->ext_csd;
>
> /* Power class selection is supported for versions >= 4.0 */
> if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
> @@ -759,14 +755,14 @@ static int mmc_select_powerclass(struct mmc_card *card,
>
> switch (1 << host->ios.vdd) {
> case MMC_VDD_165_195:
> - if (host->ios.clock <= 26000000)
> - pwrclass_val = card->ext_csd.raw_pwr_cl_26_195;
> - else if (host->ios.clock <= 52000000)
> + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
> + pwrclass_val = ext_csd->raw_pwr_cl_26_195;
> + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
> pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
> - card->ext_csd.raw_pwr_cl_52_195 :
> - card->ext_csd.raw_pwr_cl_ddr_52_195;
> - else if (host->ios.clock <= 200000000)
> - pwrclass_val = card->ext_csd.raw_pwr_cl_200_195;
> + ext_csd->raw_pwr_cl_52_195 :
> + ext_csd->raw_pwr_cl_ddr_52_195;
> + else if (host->ios.clock <= MMC_HS200_MAX_DTR)
> + pwrclass_val = ext_csd->raw_pwr_cl_200_195;
> break;
> case MMC_VDD_27_28:
> case MMC_VDD_28_29:
> @@ -777,14 +773,14 @@ static int mmc_select_powerclass(struct mmc_card *card,
> case MMC_VDD_33_34:
> case MMC_VDD_34_35:
> case MMC_VDD_35_36:
> - if (host->ios.clock <= 26000000)
> - pwrclass_val = card->ext_csd.raw_pwr_cl_26_360;
> - else if (host->ios.clock <= 52000000)
> + if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
> + pwrclass_val = ext_csd->raw_pwr_cl_26_360;
> + else if (host->ios.clock <= MMC_HIGH_52_MAX_DTR)
> pwrclass_val = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
> - card->ext_csd.raw_pwr_cl_52_360 :
> - card->ext_csd.raw_pwr_cl_ddr_52_360;
> - else if (host->ios.clock <= 200000000)
> - pwrclass_val = card->ext_csd.raw_pwr_cl_200_360;
> + ext_csd->raw_pwr_cl_52_360 :
> + ext_csd->raw_pwr_cl_ddr_52_360;
> + else if (host->ios.clock <= MMC_HS200_MAX_DTR)
> + pwrclass_val = ext_csd->raw_pwr_cl_200_360;
> break;
> default:
> pr_warning("%s: Voltage range not supported "
> @@ -810,6 +806,37 @@ static int mmc_select_powerclass(struct mmc_card *card,
> return err;
> }
>
> +static int mmc_select_powerclass(struct mmc_card *card)
> +{
> + int err, ddr;
> + u32 bus_width, ext_csd_bits;
> + struct mmc_host *host = card->host;
> +
> + /* Power class selection is supported for versions >= 4.0 */
> + if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
> + return 0;
> +
> + bus_width = host->ios.bus_width;
> + /* Power class values are defined only for 4/8 bit bus */
> + if (bus_width == MMC_BUS_WIDTH_1)
> + return 0;
> +
> + ddr = mmc_snoop_ddr(card);
> + if (ddr)
> + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
> + EXT_CSD_DDR_BUS_WIDTH_8 : EXT_CSD_DDR_BUS_WIDTH_4;
> + else
> + ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
> + EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
> +
> + err = __mmc_select_powerclass(card, ext_csd_bits);
> + if (err)
> + pr_warn("%s: power class selection to bus width %d ddr %d
> failed\n",
> + mmc_hostname(host), 1 << bus_width, ddr);
> +
> + return err;
> +}
> +
> /*
> * Selects the desired buswidth and switch to the HS200 mode
> * if bus width set without error
> @@ -1171,11 +1198,6 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
>
> ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
> EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
> - err = mmc_select_powerclass(card, ext_csd_bits);
> - if (err)
> - pr_warning("%s: power class selection to bus width %d"
> - " failed\n", mmc_hostname(card->host),
> - 1 << bus_width);
> }
>
> /*
> @@ -1204,12 +1226,6 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
> bus_width = bus_widths[idx];
> if (bus_width == MMC_BUS_WIDTH_1)
> ddr = 0; /* no DDR for 1-bit width */
> - err = mmc_select_powerclass(card,
> ext_csd_bits[idx][0]);
> - if (err)
> - pr_warning("%s: power class selection to "
> - "bus width %d failed\n",
> - mmc_hostname(card->host),
> - 1 << bus_width);
>
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> EXT_CSD_BUS_WIDTH,
> @@ -1234,13 +1250,6 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
> }
>
> if (!err && ddr) {
> - err = mmc_select_powerclass(card,
> ext_csd_bits[idx][1]);
> - if (err)
> - pr_warning("%s: power class selection to "
> - "bus width %d ddr %d failed\n",
> - mmc_hostname(card->host),
> - 1 << bus_width, ddr);
> -
> err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
> EXT_CSD_BUS_WIDTH,
> ext_csd_bits[idx][1],
> @@ -1278,6 +1287,11 @@ static int mmc_init_card(struct mmc_host *host, u32
> ocr,
> }
>
> /*
> + * Choose the power calss with selected bus interface
One line of comment is enough.
"calss" -> "class".
> + */
> + mmc_select_powerclass(card);
> +
> + /*
> * Enable HPI feature (if supported)
> */
> if (card->ext_csd.hpi) {
> --
> 1.7.0.4
>
>
You should run checkpatch as well.
Besides these minor things, looks good - nice clean up!
Kind regards
Ulf Hansson
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
