On 3 June 2014 01:54, Jon Pry <[email protected]> wrote:
> This bug effects Asus T100 as well as other Baytrail-T devices.
> Erratum in question can be found at
> http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/atom-Z36xxx-Z37xxx-spec-update.pdf
>
> Signed-off-by: Jon Pry <jonpry <at> gmail.com>
> ---
> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
> index ebb3f39..ebed2a0 100644
> --- a/drivers/mmc/host/sdhci-acpi.c
> +++ b/drivers/mmc/host/sdhci-acpi.c
> @@ -123,7 +123,7 @@ static const struct sdhci_acpi_slot
> sdhci_acpi_slot_int_emmc = {
>
> static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
> .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
> - .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
> + .quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
> SDHCI_QUIRK2_BROKEN_POWER_ENABLE,
> .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
> .flags = SDHCI_ACPI_RUNTIME_PM,
> .pm_caps = MMC_PM_KEEP_POWER,
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 9a79fc4..5a0e928 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -22,6 +22,7 @@
> #include <linux/scatterlist.h>
> #include <linux/regulator/consumer.h>
> #include <linux/pm_runtime.h>
> +#include <linux/gpio.h>
>
> #include <linux/leds.h>
>
> @@ -1261,6 +1262,10 @@ static inline void sdhci_update_clock(struct
> sdhci_host *host)
> sdhci_set_clock(host, clock);
> }
>
> +static inline void sdhci_set_power_quirk(unsigned short power) {
> + gpio_set_value(SDHCI_POWER_QUIRK_GPIO, power);
> +}
> +
I would suggest you to implement this through a gpio regulator instead.
In that way, you likely don't have to change that much in driver, right?
Kind regards
Uffe
> static int sdhci_set_power(struct sdhci_host *host, unsigned short power)
> {
> u8 pwr = 0;
> @@ -1292,6 +1297,9 @@ static int sdhci_set_power(struct sdhci_host *host,
> unsigned short power)
> sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
> if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
> sdhci_runtime_pm_bus_off(host);
> + /* The intel Bay Trail SoCs need to assert a GPIO as a work
> around */
> + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_ENABLE)
> + sdhci_set_power_quirk(0);
> return 0;
> }
>
> @@ -1311,8 +1319,14 @@ static int sdhci_set_power(struct sdhci_host *host,
> unsigned short power)
>
> pwr |= SDHCI_POWER_ON;
>
> +
> sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
>
> + /* The intel Bay Trail SoCs need to assert a GPIO as a work around */
> + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_ENABLE)
> + sdhci_set_power_quirk(1);
> +
> +
> if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
> sdhci_runtime_pm_bus_on(host);
>
> @@ -2820,6 +2841,18 @@ int sdhci_add_host(struct sdhci_host *host)
> host->flags &= ~SDHCI_USE_SDMA;
> }
>
> + if ((host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_ENABLE)) {
> + printk("Using GPIO for power enable as it is marked broken\n");
> + if (gpio_request(SDHCI_POWER_QUIRK_GPIO, "SDIO_PWR_EN") < 0) {
> + printk("Unable to request GPIO. SDIO may be broken.");
> + host->quirks2 = host->quirks2 &
> ~SDHCI_QUIRK2_BROKEN_POWER_ENABLE;
> + }
> + else if (gpio_direction_output(SDHCI_POWER_QUIRK_GPIO, 0) < 0) {
> + printk("Unable to set GPIO direction. SDIO may be broken.");
> + host->quirks2 = host->quirks2 &
> ~SDHCI_QUIRK2_BROKEN_POWER_ENABLE;
> + }
> + }
> +
> if ((host->version >= SDHCI_SPEC_200) &&
> (caps[0] & SDHCI_CAN_DO_ADMA2))
> host->flags |= SDHCI_USE_ADMA;
> @@ -3325,6 +3358,10 @@ void sdhci_remove_host(struct sdhci_host *host, int
> dead)
> tasklet_kill(&host->card_tasklet);
> tasklet_kill(&host->finish_tasklet);
>
> + if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_ENABLE) {
> + gpio_free(SDHCI_POWER_QUIRK_GPIO);
> + }
> +
> if (host->vmmc) {
> regulator_disable(host->vmmc);
> regulator_put(host->vmmc);
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 0a3ed01..027fcd1 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -84,11 +84,12 @@
> #define SDHCI_CTRL_ADMA64 0x18
> #define SDHCI_CTRL_8BITBUS 0x20
>
> #define SDHCI_POWER_CONTROL 0x29
> #define SDHCI_POWER_ON 0x01
> #define SDHCI_POWER_180 0x0A
> #define SDHCI_POWER_300 0x0C
> #define SDHCI_POWER_330 0x0E
> +#define SDHCI_POWER_QUIRK_GPIO 195 /*GPIO offset 41 of SCORE device is
> SD3_PWR_EN*/
>
> #define SDHCI_BLOCK_GAP_CONTROL 0x2A
>
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> index 7be12b8..92cec16 100644
> --- a/include/linux/mmc/sdhci.h
> +++ b/include/linux/mmc/sdhci.h
> @@ -102,6 +102,9 @@ struct sdhci_host {
> #define SDHCI_QUIRK2_BROKEN_HS200 (1<<6)
> /* Controller does not support DDR50 */
> #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
> +/* Controller cannot initialize power (must use GPIO instead) */
> +#define SDHCI_QUIRK2_BROKEN_POWER_ENABLE (1<<8)
> +
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
