Even eMMC card can support 3.3v to 1.2v vccq in DDR, but not all host controller can support this, like some of the SDHCI host which connect to an eMMC device. Some of these host controller still needs to use 1.8v vccq for supporting DDR mode.
If a host controller cannot support 3.3v for DDR, try 1.8v. Signed-off-by: Chuanxiao Dong <[email protected]> Signed-off-by: Yunpeng Gao <[email protected]> --- drivers/mmc/core/mmc.c | 19 +++++++++++++++++++ include/linux/mmc/host.h | 1 + 2 files changed, 20 insertions(+) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 793c6f7..13a5b24 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1000,6 +1000,25 @@ static int mmc_select_hs_ddr(struct mmc_card *card) return err; } + /* + * Even eMMC card can support 3.3v to 1.2v vccq, but not all + * host controller can support this, like some of the SDHCI + * controller which connect to an eMMC device. Some of these + * host controller still needs to use 1.8v vccq for supporting + * DDR mode. + * + * If a host controller cannot support 3.3v for DDR, try 1.8v + */ + if (unlikely(host->caps2 & MMC_CAP2_NO_3_3V_DDR)) { + if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V) { + err = __mmc_set_signal_voltage(host, + MMC_SIGNAL_VOLTAGE_180); + if (err) + return err; + } else + return -EOPNOTSUPP; + } + mmc_set_timing(host, MMC_TIMING_MMC_DDR52); return err; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7960424..e5d3ada 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -283,6 +283,7 @@ struct mmc_host { #define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ MMC_CAP2_HS400_1_2V) #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) +#define MMC_CAP2_NO_3_3V_DDR (1 << 18) /* doesn't support 3.3v vccq in ddr */ mmc_pm_flag_t pm_caps; /* supported pm features */ -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
