Make a new function out of common code used for drive
strength selection.
Signed-off-by: Adrian Hunter <adrian.hun...@intel.com>
---
drivers/mmc/core/core.c | 38 ++++++++++++++++++++++++++++++++++++++
drivers/mmc/core/core.h | 2 ++
drivers/mmc/core/sd.c | 27 +++------------------------
drivers/mmc/core/sdio.c | 25 +++----------------------
4 files changed, 46 insertions(+), 46 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index dbc40c5..373a1cf 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1634,6 +1634,44 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned
int drv_type)
mmc_host_clk_release(host);
}
+int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr,
+ int card_drv_type, int *drv_type)
+{
+ struct mmc_host *host = card->host;
+ int host_drv_type = SD_DRIVER_TYPE_B;
+ int drive_strength;
+
+ *drv_type = 0;
+
+ if (!host->ops->select_drive_strength)
+ return 0;
+
+ /* Use SD definition of driver strength for hosts */
+ if (host->caps & MMC_CAP_DRIVER_TYPE_A)
+ host_drv_type |= SD_DRIVER_TYPE_A;
+
+ if (host->caps & MMC_CAP_DRIVER_TYPE_C)
+ host_drv_type |= SD_DRIVER_TYPE_C;
+
+ if (host->caps & MMC_CAP_DRIVER_TYPE_D)
+ host_drv_type |= SD_DRIVER_TYPE_D;
+
+ /*
+ * The drive strength that the hardware can support
+ * depends on the board design. Pass the appropriate
+ * information and let the hardware specific code
+ * return what is possible given the options
+ */
+ mmc_host_clk_hold(host);
+ drive_strength = host->ops->select_drive_strength(card, max_dtr,
+ host_drv_type,
+ card_drv_type,
+ drv_type);
+ mmc_host_clk_release(host);
+
+ return drive_strength;
+}
+
/*
* Apply power to the MMC stack. This is a two-stage process.
* First, we enable power to the card without the clock running.
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index e6f2de7..1a22a82 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -50,6 +50,8 @@ int mmc_set_signal_voltage(struct mmc_host *host, int
signal_voltage, u32 ocr);
int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
+int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr,
+ int card_drv_type, int *drv_type);
void mmc_power_up(struct mmc_host *host, u32 ocr);
void mmc_power_off(struct mmc_host *host);
void mmc_power_cycle(struct mmc_host *host, u32 ocr);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index dba1acf..e1a98b1 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -386,35 +386,14 @@ out:
static int sd_select_driver_type(struct mmc_card *card, u8 *status)
{
- int host_drv_type = SD_DRIVER_TYPE_B;
int card_drv_type, drive_strength, drv_type;
int err;
- if (!card->host->ops->select_drive_strength)
- return 0;
-
- if (card->host->caps & MMC_CAP_DRIVER_TYPE_A)
- host_drv_type |= SD_DRIVER_TYPE_A;
-
- if (card->host->caps & MMC_CAP_DRIVER_TYPE_C)
- host_drv_type |= SD_DRIVER_TYPE_C;
-
- if (card->host->caps & MMC_CAP_DRIVER_TYPE_D)
- host_drv_type |= SD_DRIVER_TYPE_D;
-
card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
- /*
- * The drive strength that the hardware can support
- * depends on the board design. Pass the appropriate
- * information and let the hardware specific code
- * return what is possible given the options
- */
- mmc_host_clk_hold(card->host);
- drive_strength = card->host->ops->select_drive_strength(card,
- card->sw_caps.uhs_max_dtr,
- host_drv_type, card_drv_type, &drv_type);
- mmc_host_clk_release(card->host);
+ drive_strength = mmc_select_drive_strength(card,
+ card->sw_caps.uhs_max_dtr,
+ card_drv_type, &drv_type);
if (drive_strength) {
err = mmc_sd_switch(card, 1, 2, drive_strength, status);
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index de92ffe..8cc1793 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -399,34 +399,15 @@ static unsigned char host_drive_to_sdio_drive(int
host_strength)
static void sdio_select_driver_type(struct mmc_card *card)
{
- int host_drv_type = SD_DRIVER_TYPE_B;
int card_drv_type, drive_strength, drv_type;
unsigned char card_strength;
int err;
- if (!card->host->ops->select_drive_strength)
- return;
-
- if (card->host->caps & MMC_CAP_DRIVER_TYPE_A)
- host_drv_type |= SD_DRIVER_TYPE_A;
-
- if (card->host->caps & MMC_CAP_DRIVER_TYPE_C)
- host_drv_type |= SD_DRIVER_TYPE_C;
-
- if (card->host->caps & MMC_CAP_DRIVER_TYPE_D)
- host_drv_type |= SD_DRIVER_TYPE_D;
-
card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
- /*
- * The drive strength that the hardware can support
- * depends on the board design. Pass the appropriate
- * information and let the hardware specific code
- * return what is possible given the options
- */
- drive_strength = card->host->ops->select_drive_strength(card,
- card->sw_caps.uhs_max_dtr,
- host_drv_type, card_drv_type, &drv_type);
+ drive_strength = mmc_select_drive_strength(card,
+ card->sw_caps.uhs_max_dtr,
+ card_drv_type, &drv_type);
if (drive_strength) {
/* if error just use default for drive strength B */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
