Actually we can use the "clk" in the struct sdhci_pltfm_host. Also change the "external clock" to "core clock" and kill two redundant private functions in this driver as suggested by Ray Jui.
Signed-off-by: Kevin Hao <[email protected]> --- v2: - s/external clock/core clock/ - kill the private functions sdhci_bcm_kona_get_max_clk() and sdhci_bcm_kona_get_timeout_clock() drivers/mmc/host/sdhci-bcm-kona.c | 46 +++++++++++---------------------------- 1 file changed, 13 insertions(+), 33 deletions(-) diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c index 34bb8f92586e..5bc263b447b2 100644 --- a/drivers/mmc/host/sdhci-bcm-kona.c +++ b/drivers/mmc/host/sdhci-bcm-kona.c @@ -54,7 +54,6 @@ struct sdhci_bcm_kona_dev { struct mutex write_lock; /* protect back to back writes */ - struct clk *external_clk; }; @@ -175,24 +174,6 @@ static void sdhci_bcm_kona_card_event(struct sdhci_host *host) } } -/* - * Get the base clock. Use central clock source for now. Not sure if different - * clock speed to each dev is allowed - */ -static unsigned int sdhci_bcm_kona_get_max_clk(struct sdhci_host *host) -{ - struct sdhci_bcm_kona_dev *kona_dev; - struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); - kona_dev = sdhci_pltfm_priv(pltfm_priv); - - return host->mmc->f_max; -} - -static unsigned int sdhci_bcm_kona_get_timeout_clock(struct sdhci_host *host) -{ - return sdhci_bcm_kona_get_max_clk(host); -} - static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host, u8 power_mode) { @@ -207,8 +188,8 @@ static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host, static struct sdhci_ops sdhci_bcm_kona_ops = { .set_clock = sdhci_set_clock, - .get_max_clock = sdhci_bcm_kona_get_max_clk, - .get_timeout_clock = sdhci_bcm_kona_get_timeout_clock, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, .platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, @@ -264,21 +245,21 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev) goto err_pltfm_free; } - /* Get and enable the external clock */ - kona_dev->external_clk = devm_clk_get(dev, NULL); - if (IS_ERR(kona_dev->external_clk)) { - dev_err(dev, "Failed to get external clock\n"); - ret = PTR_ERR(kona_dev->external_clk); + /* Get and enable the core clock */ + pltfm_priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(pltfm_priv->clk)) { + dev_err(dev, "Failed to get core clock\n"); + ret = PTR_ERR(pltfm_priv->clk); goto err_pltfm_free; } - if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) { - dev_err(dev, "Failed to set rate external clock\n"); + if (clk_set_rate(pltfm_priv->clk, host->mmc->f_max) != 0) { + dev_err(dev, "Failed to set rate core clock\n"); goto err_pltfm_free; } - if (clk_prepare_enable(kona_dev->external_clk) != 0) { - dev_err(dev, "Failed to enable external clock\n"); + if (clk_prepare_enable(pltfm_priv->clk) != 0) { + dev_err(dev, "Failed to enable core clock\n"); goto err_pltfm_free; } @@ -333,7 +314,7 @@ err_reset: sdhci_bcm_kona_sd_reset(host); err_clk_disable: - clk_disable_unprepare(kona_dev->external_clk); + clk_disable_unprepare(pltfm_priv->clk); err_pltfm_free: sdhci_pltfm_free(pdev); @@ -346,12 +327,11 @@ static int sdhci_bcm_kona_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); - struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv); int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); sdhci_remove_host(host, dead); - clk_disable_unprepare(kona_dev->external_clk); + clk_disable_unprepare(pltfm_priv->clk); sdhci_pltfm_free(pdev); -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
