On 15 February 2015 at 15:46, Yoshihiro Kaneko <[email protected]> wrote:
> From: Kouichi Tomita <[email protected]>
>
> A command end interrupt should not be processed between command issue
> and setting of wait_for flag. It expects already the flag to be set.
> Therefore the exclusive control was added.
>
> Signed-off-by: Kouichi Tomita <[email protected]>
> Signed-off-by: Yoshihiro Kaneko <[email protected]>
I followed the discussion for this patch, I decided to apply it as is, thanks!
Kind regards
Uffe
> ---
>
> This patch is based on next branch of Chris Ball's mmc tree.
>
> drivers/mmc/host/sh_mmcif.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
> index 7d9d6a3..e5d0b42 100644
> --- a/drivers/mmc/host/sh_mmcif.c
> +++ b/drivers/mmc/host/sh_mmcif.c
> @@ -875,6 +875,7 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
> struct mmc_command *cmd = mrq->cmd;
> u32 opc = cmd->opcode;
> u32 mask;
> + unsigned long flags;
>
> switch (opc) {
> /* response busy check */
> @@ -909,10 +910,12 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host
> *host,
> /* set arg */
> sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg);
> /* set cmd */
> + spin_lock_irqsave(&host->lock, flags);
> sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc);
>
> host->wait_for = MMCIF_WAIT_FOR_CMD;
> schedule_delayed_work(&host->timeout_work, host->timeout);
> + spin_unlock_irqrestore(&host->lock, flags);
> }
>
> static void sh_mmcif_stop_cmd(struct sh_mmcif_host *host,
> @@ -1171,6 +1174,12 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
> struct sh_mmcif_host *host = dev_id;
> struct mmc_request *mrq;
> bool wait = false;
> + unsigned long flags;
> + int wait_work;
> +
> + spin_lock_irqsave(&host->lock, flags);
> + wait_work = host->wait_for;
> + spin_unlock_irqrestore(&host->lock, flags);
>
> cancel_delayed_work_sync(&host->timeout_work);
>
> @@ -1188,7 +1197,7 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id)
> * All handlers return true, if processing continues, and false, if
> the
> * request has to be completed - successfully or not
> */
> - switch (host->wait_for) {
> + switch (wait_work) {
> case MMCIF_WAIT_FOR_REQUEST:
> /* We're too late, the timeout has already kicked in */
> mutex_unlock(&host->thread_lock);
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
