On Wed, 2015-03-18 at 15:53 +0000, Ben Dooks wrote:
> Change the __raw IO functions to endian agnostic relaxed ones to allow
> the driver to function on big endian ARM systems.
>
> Signed-off-by: Ben Dooks <[email protected]>
> --
> CC: Ludovic Desroches <[email protected]>
> CC: Chris Ball <[email protected]>
> CC: Ulf Hansson <[email protected]>
> CC: [email protected]
> ---
> drivers/mmc/host/atmel-mci-regs.h | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/atmel-mci-regs.h
> b/drivers/mmc/host/atmel-mci-regs.h
> index c97001e..711bb53 100644
> --- a/drivers/mmc/host/atmel-mci-regs.h
> +++ b/drivers/mmc/host/atmel-mci-regs.h
> @@ -135,10 +135,17 @@
> #define ATMCI_REGS_SIZE 0x100
>
> /* Register access macros */
> -#define atmci_readl(port,reg) \
> +#ifdef CONFIG_AVR32
> +#define atmci_readl(port,reg) \
> __raw_readl((port)->regs + reg)
> #define atmci_writel(port,reg,value) \
> __raw_writel((value), (port)->regs + reg)
> +#else
> +#define atmci_readl(port,reg) \
> + readl_relaxed((port)->regs + reg)
> +#define atmci_writel(port,reg,value) \
> + writel_relaxed((value), (port)->regs + reg)
> +#endif
This pattern is repeated in a lot of drivers; is it worth defining
atmel_{read,write}l_relaxed() in a common header?
#ifdef CONFIG_AVR32
/* CPU and peripherals are both big-endian, so don't byte-swap */
#define atmel_readl_relaxed(addr) __raw_readl(addr)
#define atmel_writel_relaxed(value, addr) __raw_writel(value, addr)
#else
/* Peripherals are little-endian, so byte-swap if CPU isn't */
#define atmel_readl_relaxed(addr) readl_relaxed(addr)
#define atmel_writel_relaxed(value, addr) writel_relaxed(value, addr)
#endif
Ben.
> /* On AVR chips the Peripheral DMA Controller is not connected to MCI. */
> #ifdef CONFIG_AVR32
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
