After commit 52221610dd84 ("mmc: sdhci: Improve external VDD regulator
support"), for the VDD is supplied via external regulators, we ignore
the code to convert a VDD voltage request into one of the standard
SDHCI voltage levels, then program it in the SDHCI_POWER_CONTROL. This
brings two issues:

1. SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk isn't handled properly any
more.

2. What's more, some controllers such as the sdhci-pxav3 used in
marvell berlin SoCs require the voltage levels programming in the
SDHCI_POWER_CONTROL register, even the VDD is supplied by external
regulator.

This patch restores the behavior when setting VDD through external
regulator by moving the call of mmc_regulator_set_ocr() to the end
of sdhci_set_power() function.

After this patch, the sdcard on Marvell Berlin SoCs work again.

Signed-off-by: Jisheng Zhang <jszh...@marvell.com>
Fixes: 52221610dd84 ("mmc: sdhci: Improve external VDD ...")
---
 drivers/mmc/host/sdhci.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index b48565e..616aa90 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1274,19 +1274,6 @@ static void sdhci_set_power(struct sdhci_host *host, 
unsigned char mode,
        struct mmc_host *mmc = host->mmc;
        u8 pwr = 0;
 
-       if (!IS_ERR(mmc->supply.vmmc)) {
-               spin_unlock_irq(&host->lock);
-               mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
-               spin_lock_irq(&host->lock);
-
-               if (mode != MMC_POWER_OFF)
-                       sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
-               else
-                       sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
-
-               return;
-       }
-
        if (mode != MMC_POWER_OFF) {
                switch (1 << vdd) {
                case MMC_VDD_165_195:
@@ -1345,6 +1332,12 @@ static void sdhci_set_power(struct sdhci_host *host, 
unsigned char mode,
                if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
                        mdelay(10);
        }
+
+       if (!IS_ERR(mmc->supply.vmmc)) {
+               spin_unlock_irq(&host->lock);
+               mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+               spin_lock_irq(&host->lock);
+       }
 }
 
 /*****************************************************************************\
-- 
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to