Hi There, I'm trying to use a dos program called kzdos.exe that writes to a led scrolling display. I've checked the mailing list archive & dejanews.com, nothing substantive.
Here's a summary of my actions: -I've installed the V.1.0.2.0 binary distro & moved it to /usr/local/dosemu -I've chmod'd 4755 /usr/local/dosemu/dosemu -When I run it with "-F /usr/local/dosemu/conf/dosemu.conf" switch, dosemu doesn't start. -I've added $_com2 = "/dev/ttyS1" to the conf file, no luck. Q: -Where in /proc on 2.4.x kernel are the addresses for the serial ports? Tnx! C. Disclaimer: The views and opinions expressed in this message are not necessarily those of Tradek Holdings Limited or its subsidiaries. Each page attached hereto must also be read in conjunction with this disclaimer. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or reliance upon the contents of this e-mail is strictly prohibited - To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
