Hi, I'm trying to get my CD-ROM to work under DOSEMU and FreeDOS. I followed the directions in the README and both cdrom.sys and mscdex load fine; however, when I do a dir in the cd-rom drive, it lists no files. The archives didn't show any good information on that problem
Here's some sample output:
[dosemu cdrom driver installed (V0.2)]
FreeDOS Kernel compatibility 5.0
FreeDOS kernel version 1.1.24c (Build 2024c) [Jun 10 2001
22:25:01]
D: = LINUX\FS/HOME/VIKTOR attrib = READ/WRITE
E: = LINUX\FS/TMP/DOSEMU.3TPN9B/TMP attrib = READ/WRITE
Welcome to dosemu 1.0.2.1!
MSCDEX Version 2.23
Copyright (C) Microsoft Corp. 1986-1993. All rights reserved.
Drive F: = Driver MSCD0001 unit 0
609952 bytes free memory
0 bytes expanded memory
12948 bytes CODE
2112 bytes static DATA
12618 bytes dynamic DATA
27936 bytes used
DOSEMU built-in command.com version 1.0
C:\>dir f:
dir: file not found
C:\>eject <--- works
Obviously, there are files on this CD and my CD setup under Linux is
fine. It's a plextor on /dev/sr0 (not mounted, when dosemu is run).
Here's some configuration data:
C:\>ver
DOSEMU built-in command.com version 1.0
DOSEMU version is 1.0.2.1, 2001/10/13
FreeDOS kernel version 1.1.24 [Jun 10 2001 22:25:01]
XX-DOS version reported is 5.0
C:\>
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
Type: CD-ROM ANSI SCSI revision:
02
$ ll /dev/cdrom /dev/sr0
lrwxrwxrwx 1 root root 3 16. Dez 19:07 /dev/cdrom -> sg0
brw-rw---- 2 root cdrom 11, 0 5. Jul 2000 /dev/sr0
$ id
uid=1000(viktor) gid=1000(viktor)
groups=1000(viktor),24(cdrom),25(floppy),29(audio),44(video)
BTW, mounting the drive under Linux and using lredir works,
unfortunately I'm trying to run dsa (a game: Das Schwarze Auge) which
expects to find its cd in the drive (fscked copy protection!).
TIA,
Viktor
--
Viktor Rosenfeld
WWW: http://www.informatik.hu-berlin.de/~rosenfel/
msg00348/pgp00000.pgp
Description: PGP signature
