Bart Oldeman wrote:
> what does xdosemu report with -D+c in boot.log?
Running unpriviledged in low feature mode
kernel CPU speed is 801000441 Hz
Running on CPU=586, FPU=1
using stderr for debug-output
debug flags: +c
CONF: config variable parser_version_3 set
CONF: config variable c_system set
CONF: Parsing /home/dlphilp/mydos/dosemu/conf/global.conf file.
CONF: config variable version_3_style_used set
CONF: config variable version_3_style_used unset
CONF: config variable version_3_style_used set
CONF: opened include file /home/dlphilp/mydos/dosemu/conf/dosemu.conf
CONF: closed include file /home/dlphilp/mydos/dosemu/conf/dosemu.conf
CONF: entered user scope, includelevel 0
CONF: opened include file /home/dlphilp/mydos/dosemu/conf/dosemurc
CONF: closed include file /home/dlphilp/mydos/dosemu/conf/dosemurc
CONF: left user scope, includelevel 0
CONF: config variable skip_dosrc set
CONF: variable _X_keycode replaced by user
debug flags: -a+c
debug flags: -dARWDCvXkiTsm#pQgcwhIExMnPrSgZ
CONF: Disabling use of pentium timer
CONF: dosbanner on
CONF: timint on
CONF: CPU set to 586
CONF: 1024k bytes XMS memory
CONF: 2048k bytes EMS memory
CONF: EMS-frame = 0xe000
CONF: dosemu running on console
CONF: allowvideoportaccess on
CHIPSET: 0
CONF: VGA-BIOS-Segment c000
CONF: VGA-BIOS-Size 10000
SER: /dev/mouse port 0 int 0
MOUSE: /dev/mouse type 0 using internaldriver: yes, emulate3buttons: no
baudrate: 0
CONF: Keyboard-layout keyb-user
CONF: Keyboard-layout auto
device: /dev/fd0 type 2 h: 0 s: 0 t: 0 floppy A:
CONF: DPMI-Server on
CONF: not allowing speaker port access
CONF: IPX support off
CONF(LPT0) f: (null) c: lpr o: -Plp %s t: 20 port: 378
device: /home/dlphilp/mydos/dosemu/freedos type 4 h: -1 s: -1 t: -1
drive C:
CONF: config variable c_system unset
CONF: not enough privilege to define config variable c_user
debug flags: +c
CONF: Keyboard-layout auto
CONF: Forceing neutral Keyboard-layout, X-server will translate
CONF: mostly running as USER: uid=500 (cached 500) gid=500 (cached 500)
CONF: reserving 640Kb at 0x00000 for 'd' (Base DOS memory (first 640K))
CONF: reserving 64Kb at 0xF0000 for 'r' (Dosemu reserved area)
CONF: reserving 128Kb at 0xA0000 for 'v' (Video memory)
CONF: reserving 64Kb at 0xE0000 for 'E' (EMS page frame)
TIME: using 9154 usec for updating ALRM timer
DOS termination requested
It seems that my changes should work. Any suggestions ?
Best regards,
== Dave Phillips
The Book Of Linux Music & Sound at http://www.nostarch.com/lms.htm
The Linux Soundapps Site at http://linux-sound.org
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
