Forwarding to the list as I don't have time to look into this now...
Bart
---------- Forwarded message ----------
Date: Wed, 19 Feb 2003 16:13:47 -0600
From:
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Dosemu port access
Also I should have mention the obvious:
I have my user name listed in the dosemu.users file and
proc/ioports shows nothing else has access even ehen dosemu is running
there 2000 range is not listed. I need 200-21f.
Thanks
Ed
/etc>cat dosemu.users
log_level= 1
emarch c_all c_port c_system
marche c_all c_port c_system
root c_all
all c_all c_port c_system
/etc>who am i
adams1a!emarch pts/2 Feb 19 15:42 (marche-1.roundlake.baxter.com)
(adams1a marche) 16:08:43
/etc>cat /proc/ioports | more
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1000-1fff : PCI Bus #01
1000-10ff : PCI device 1002:4742
2000-203f : PCI device 8086:1229
2000-203f : eepro100
2040-205f : PCI device 8086:7112
2040-205f : usb-uhci
2060-206f : PCI device 8086:7111
2060-2067 : ide0
2068-206f : ide1
f800-f83f : PCI device 8086:7113
fc00-fc1f : PCI device 8086:7113
(adams1a marche) 16:09:39
/etc>
Ed March x4115
Ed March
02/19/03 03:58 PM
To: [EMAIL PROTECTED]
cc:
Subject:
Hi
I was running DosEmu 1.0.2.0 under SuSE 7.2 and ioport access worked fine.
When I upgraded to SuSE 8.1 it failed to give me I/O access that I need
for an in-circuit emulator and EPROM programer.
I remember having some problems with 7.2 and upgrade from 1.0.? to 1.0.2
and finally added a "_ports" statement in various places and it worked. I
spend _2_DAYS_ with 1.0.2.0 and suse 8.1 and never got ioport access to
work.
The fact that debug inport 200 shows FF means it is not allowing me to
access the ioports.
I grepped my dosemu.conf file from etc for you too. How can i go about
debuggng this? I tried running it under root and
all sorts of conf settings its always the same! Really appreciate your
help!
Thanks
Ed March / Baxter Health Care
------snip----
Welcome to dosemu 1.0.2.0!
DOSEMU built-in command.com version 1.0
C:\>debug
=i 200
FF
=i 201
FF
=
--snip---
/etc>grep _ports dosemu.*
dosemu.conf:$_ports = "0x200 range 0x200,0x700"# list of portnumbers such
as "0x1ce 0x1cf 0x238"
dosemu.normal.conf:$_ports = "0x200 range 0x200,0x700"# list of
portnumbers such as "0x1ce 0x1cf 0x238"
/etc>
Ed March x4115
-
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
