i've upgraded to dosemu 1.1.4, suse linux 8.1 i've configured: $_com3 = "/dev/ttyS2"
logging output see below. mode can't find com3, only com1
there are any problems known?
christian
SER: directory /var/lock namestub LCK.. binary No SER: /dev/ttyS2 port 0 int 0 ...
SERIAL $Header: /usr/src/dosemu0.60/serial/RCS/ser_init.c,v 1.1 1995/05/06 16:26
:19 root Exp root $
SER: Running serial_init, 1 serial ports
registering /dev/ttyS2 for serial
SER0: enabling interrupt 12
SER0: COM3, intlevel=12, base=0x3e8, device=/dev/ttyS2
SER0: BIOS memory location 0x404 has value of 0x3e8
...
SER0: INT14 0x0: Initialize port 2, AL=0xa3 SER0: Read LCR = 0x0 SER0: MCR = 0x3 SER0: MCR: DTR -> 1 SER0: MCR: RTS -> 2 SER0: LCR = 0x83, DLAB high. SER0: Divisor LSB = 0x30 SER0: Divisor MSB = 0x0 SER0: LCR = 0x3, DLAB low. SER0: Line Control: NOT A TTY. SER0: Read LSR = 0x0 SER0: tmp=0 int_cond=0 int_req=0 int=0 SER0: Read MSR = 0x0 SER0: INT14 0x0: Return with AL=0x0 AH=0x0 --
- To unsubscribe from this list: send the line "unsubscribe linux-msdos" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
