Here we go, I've attached three logs
BOOT.OK is a log from a dosemu 1.1.1.x which is working fine (I can print to my serial printer) BOOT.NO is the same printing from a dosemu 1.1.4.12 which is not working, see how smaller it is compared to the first one BOOT.NI is a little printing (a couple of short lines) from the same dosemu used for BOOT.NO and this time it worked and printed ok. Let me know if you need more or different logs (I've enabled serial and port output on all of them +is9), I've zipped them all to save space on mail delivering. regards and thanks for your help. Maurilio. Stas Sergeev ha scritto: > Hello. > > Maurilio Longo wrote: > > int14 is working ok, but serial emulation is not (telepathy does a > Unless you provide all the necessary > logs, you'll of course not get any > concrete suggestions. > > >> works, but if there are more tp_send() one after the other I get no > > output!?!! > Great, in that case you can provide > 2 logs: when it works and when it > doesn't. That can help. > > >> 1.1.1.x was working nicely > Even better, supply the 1.1.1 log then > as well. > You'll have to enable -D9+s logging. > Changes in the Serial code were many > so guessing is not possible. > > - > To unsubscribe from this list: send the line "unsubscribe linux-msdos" in > the body of a message to [EMAIL PROTECTED] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- __________ | | | |__| [EMAIL PROTECTED] |_|_|_|____| Team OS/2 Italia
BOOT.ZIP
Description: Zip compressed data
