When I plug in my Gravis Firebird 2 joystick, and try to run the configuration utility under dosemu 98.3, I get the following: [00032437] 8042: write port 0x60 unsupported command 0x93 =>Error [00032437] 8042: write port 0x64 unsupported command 0xad, ignored [00032437] 8042: read port 0x60 = 0xfe [00032437] 8042: write port 0x64 unsupported command 0xae, ignored [00032537] 8042: write port 0x60 unsupported command 0x93 =>Error [00032537] 8042: write port 0x64 unsupported command 0xad, ignored [00032537] 8042: read port 0x60 = 0xfe [00032537] 8042: write port 0x64 unsupported command 0xae, ignored [00032647] 8042: write port 0x60 unsupported command 0x94 =>Error [00032647] 8042: write port 0x64 unsupported command 0xad, ignored [00032647] 8042: read port 0x60 = 0xfe [00032647] 8042: write port 0x64 unsupported command 0xae, ignored [00032757] 8042: write port 0x60 unsupported command 0x94 =>Error [00032757] 8042: write port 0x64 unsupported command 0xad, ignored [00032757] 8042: read port 0x60 = 0xfe [00032757] 8042: write port 0x64 unsupported command 0xae, ignored I can find out what various command that are not supported by the 8042 (at www.viatech.com), but I am not sure how to implement them in the 8042 emulation so that my joystick (which plugs into the game port and the keyboard port, and is program though the keyboard port)recevies those commands through the keyboard port and then work in dosemu. Any ideas? pointers? suggestions? Thanks for your time Martin Giguere
