I have a major problem with dosemu that i cannot resolve for all my efforts. I've held off posting it because i didn't think anyone here would be able to help, but here it I go anyway: In an attempt to run a dos implementation of zmodem under dosemu with either fossil or direct com access (this is an option in the software having nothing to do with dosemu), i have major problems at "high" speeds. The problems seem to start when buffers fill up. The modem seems to be dropping CTS (the CS light goes out) yet the SD (send data) light continues to be on for a fraction of a second. The remote end almost immediately reports a CRC error, then the process starts again. If i were to do the transfer inside bash via sz the SD light follows the CS light.. I did make one change to the serial startup code in dosemu, i removed the function that toggled DTR upon startup (to keep the modem connection alive). I didn't think this would be a problem but i wanted to make sure i mentioned it. My system: Dosemu .98.10 Kernel 2.0.34 on an i486 I thank you in advance for any help you may be able to provide. -- Matt Valites ([EMAIL PROTECTED]) The Axium - http://www.axium.net 'Help me I'm in hell'
