I solved this problem yesterday :) It's a bit weird. In
/usr/doc/dosemu-0.98.1/README.txt (for my RedHat 5.2 box) they said:
---------------------------------------
+o Load cdrom.sys within your config.sys file with e.g.:
devicehigh=c:\emu\cdrom.sys
+o Start Microsoft cdrom extension as follows:
mscdex /d:mscd0001 /l:driveletter
---------------------------------------
As I can see you put /d:mscd001 in autoexec.bat instead of /d:mscd0001.
You should have three zeros, not two.
Guilherme Fortunato wrote:
>
> I created a link called cdrom to /dev/hdb (my cdrom device file) in the
> virtual c drive for dosemu; in my config.sys there is a line:
> device=c:\cdrom.sys, and the cdrom driver is installed in every session;
> finally, my autoexec.bat has the line: mscdex /d:mscd00(1 or 0, I tried
> both) /l:d. But mscdex (which is on the virtual c drive) always report
> the error: Device drier not found: mscd00(1 or 0), no valid cdrom device
> drivers selected. How can I make the cdrom to work? I tried already
> with either a mounted or non-mounted cdrom under linux. Neither time it
> displayed a different error message. What should be the right procedures
> for me to take? I use dosemu 0.98.something with kernel 2.2.2 and run
> dosemu under X because otherwise it does not work(?). Thank you for your
> time.
>
> Regards,
>
> Guilherme Fortunato
> [EMAIL PROTECTED]
> Get Your Private, Free Email at http://www.hotmail.com
--
Catalin Bucur \|/
Hardware engineer ^(o o)^
mailto:[EMAIL PROTECTED] ~~~~~~~~~oOO~~(_)~~OOo~~~~~~~~~
