On Tue, 27 Apr 1999, Nathan Halabuda wrote:
> > So, is there any other ways to communicate between dosemu and linux
> > kernel. For example to make a virtual serial connection where COMx: on
> > dosemu side is connected somehow to Linux serial device. After this any
> > terminal emulator could be used.
>
> absolutely, im working on a project right now using linux serial devices
> on a digiboard from dosemu. its pretty simple. all you have to do is edit
> the /etc/dosemu.conf file and look for an entry like:
>
> $_com1 = ""
>
> and you simply change the com port setting you want to include the linux
> device name. for example:
>
> $_com1 = "/dev/cua0"
>
> would be the equivalent of com1 from a real dos session.
>
I tried _com and serial keywords with no success. The problem is little
differrent. I'll give an example:
Say i have configured com1 at the rear panel to be com1 in dosemu. Com2
is /dev/cua1 and agetty is running on it. I'll connett com1 and com2 with
null modem cable and run terminal emulator on dosemu.
Question is how to do this without the cable but still using comport at
dosemu side and agetty or similar program on the other end. At least
stdin, stdout and stderr on the linux side should be connetted to this
serial port.
> hope this helps.
>
> -nathan
>
>
--
Ari Moisio, Niittykatu 7, 41160 Tikkakoski, +358-40-5055239
[EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
PGP 0x3FAF0F05, fp 8A91 96E2 9864 D04D 575E 3EEE 72E9 DDD2
WWW: http://www.sci.fi/~armoi,http://www.arlainst.fi/~arimo
