Hi Y'all,
This isn't my first query on this matter, so I thought I would
try again and hopefully have better luck getting a response this
time.
I'm running RH 6.1 on an AMD K6-2/500 with 96 meg of RAM, the
dosemu version in question is:
dosemu-0.99.13.0
I used one of the 0.60 releases for a while with very good luck.
I've been fighting with the versions that came with the last
couple of RH releases with discouragingly little luck :(.
I need to run microcontroller programmers and EPROM programmers
and to get fully over to linux, this HAS to happen. I've been
head bashing for the past couple of days on this now (current
attempt), and if the answer is in the docs, I missed it :(.
I've also tried the #linix IRC channels on several of the IRC
networks and it seems that I am the only one trying to use dosemu
:(.
Basically all I want to do is to access the parallel port
(PC/x86) at 378 - it is currenly configured as an EPP/ECP (v1.7)
[1.9 didn't work either].
I am *TERMINALLY* confused as to how to do this, nothing I have
tried in the dosemu.conf file has made ANY difference (the port
remains unaccessable). I'm going to delete this and reinstall
the RPM for it to get back to a known point, I'm more than sure
that the installation is fully scrambled at this point for all
the thrashing I have been doing :-(.
Any help would be most appreciated. MORE THAN YOU KNOW!
Thanks for any assistance you can provide, I will be most
greatful!
Take care, Vikki.
--
[EMAIL PROTECTED]
