Don't know if this will tell you anything useful, but I thought I
might as well turn on the detailed debugging when I recompiled the
module anyway:
lanstreamer::streamer_init_one, entry pdev cfdd6400
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 10 (level, low) -> IRQ 10
lanstreamer: pio_start 8800 pio_end 88ff pio_len 100 pio_flags 101
lanstreamer: mmio_start e0000000 mmio_end e00000ff mmio_len 200 mmio_flags 100
LanStreamer.c v0.4.0 03/08/01 - Mike Sullivan
v0.5.3 11/13/02 - Kent Yoder
tr%d: 0000:02:01.0. I/O at 8800, MMIO at d0a1a000, using irq 10
BCTL: 2200
GPR: 4e
SISRMASK: 0
tr%d: Ringspeed autosense mode on
GPR = 4e
LAPWWO: 7ce, LAPA: 0 LAPE: 0
initialization response srb dump: 800f:0:0:0:2f0:140:30e:266:1b6:160:
UAA resides at 2f0
Adapter address: 08:00:5a:fd:42:bf:
lanstreamer::streamer_init_one, entry pdev cfdd6000
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 12 (level, low) -> IRQ 12
lanstreamer: pio_start 8400 pio_end 84ff pio_len 100 pio_flags 101
lanstreamer: mmio_start df800000 mmio_end df8000ff mmio_len 200 mmio_flags 100
LanStreamer.c v0.4.0 03/08/01 - Mike Sullivan
v0.5.3 11/13/02 - Kent Yoder
tr%d: 0000:02:02.0. I/O at 8400, MMIO at d0a1c000, using irq 12
BCTL: 2200
GPR: 4c
SISRMASK: 0
GPR = 4c
LAPWWO: 7ce, LAPA: 0 LAPE: 0
initialization response srb dump: 800f:0:0:0:2f0:140:30e:266:1b6:160:
UAA resides at 2f0
Adapter address: 08:00:5a:fd:42:c0:
lanstreamer::streamer_init_one, entry pdev cfdd8c00
ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 5 (level, low) -> IRQ 5
lanstreamer: pio_start 8000 pio_end 80ff pio_len 100 pio_flags 101
lanstreamer: mmio_start df000000 mmio_end df0000ff mmio_len 200 mmio_flags 100
LanStreamer.c v0.4.0 03/08/01 - Mike Sullivan
v0.5.3 11/13/02 - Kent Yoder
tr%d: 0000:02:03.0. I/O at 8000, MMIO at d0be2000, using irq 5
BCTL: 2200
GPR: 4e
SISRMASK: 0
GPR = 4e
LAPWWO: 7ce, LAPA: 0 LAPE: 0
initialization response srb dump: 800f:0:0:0:2f0:140:30e:266:1b6:160:
UAA resides at 2f0
Adapter address: 08:00:5a:fd:42:c1:
BMCTL: 4440
pending ints: 0
LAPWWO: 7ce, LAPA: 7ce
LAPE: 0
SISR Mask = 8020
srb open request:
300:fe00:fe00:0:18c0:0:0:0:0:0:0:0:0:0:0:0:
SISR_MASK: 8020
srb open response:
300:0:fe00:0:7f8:7e4:33c:0:77c:300:Loc 0 = ffff
Loc 1 = ffff
Loc 2 = ffff
Loc 3 = ffff
Loc 4 = ffff
Loc 5 = ffff
Loc 6 = ffff
next ffff, fs ff, len ffff
tr1: Received MAC Frame, details:
tr1: MAC Frame Dest. Addr: 20:6b:65:72:6e:65
tr1: MAC Frame Srce. Addr: 6c:3a:20:53:49:53
BMCTL: 4020
SISR MASK: 807c
tr1: Node Address: 42c0:5afd:0800
tr1: Functional Address: 0000:0000
tr1: NAUN Address: 7181:4c08:00a0
tr1: no IPv6 routers present
device tr1 entered promiscuous mode
BMCTL: 4440
pending ints: 0
LAPWWO: 7ce, LAPA: 7ce
LAPE: 0
SISR Mask = 8020
srb open request:
300:fe00:fe00:0:18c0:0:0:0:0:0:0:0:0:0:0:0:
SISR_MASK: 8020
srb open response:
300:0:fe00:0:7f8:7e4:33c:0:77c:300:<6>tr0: Opened in 16 Mbps mode
Loc 0 = ffff
Loc 1 = ffff
Loc 2 = ffff
Loc 3 = ffff
Loc 4 = ffff
Loc 5 = ffff
Loc 6 = ffff
next ffff, fs ff, len ffff
tr0: Received MAC Frame, details:
tr0: MAC Frame Dest. Addr: 20:6b:65:72:6e:65
tr0: MAC Frame Srce. Addr: 6c:3a:20:53:49:53
BMCTL: 4020
SISR MASK: 807c
tr0: Node Address: 42bf:5afd:0800
tr0: Functional Address: 0000:0000
tr0: NAUN Address: 7181:4c08:00a0
tr0: no IPv6 routers present
I also tried the STREAMER_NETWORK_MONITOR, but I don't know how to use
it apart from the /proc output:
canardo:/home/bjorn# cat /proc/net/streamer_tr
IBM LanStreamer/MPC Chipset Token Ring Adapters
tr2: Adapter Address : Node Address : Functional Addr
tr2: 08:00:5a:fd:42:c1 : 00:00:41:c9:00:b0 : b1:d0:20:9f
tr2: Token Ring Parameters Table:
tr2: Physical Addr : Up Node Address : Poll Address : AccPri : Auth
Src : Att Code :
tr2: 00:00:5b:c8 : 04:1d:87:c9:d4:d4 : 2b:c0:a0:82:12:c1 : 2bc0 : 95a1
: 13c0 :
tr2: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame
Correl :
tr2: a0:82:12:c1:00:00 : 0000 : ee7f : 1ac0 : a082 : 12c1 :
80cd :
tr2: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys :
tr2: : 24e0 : 2bc0 : 23:c7:00:00:00:00 : 00:50:41:c9 :
tr1: Adapter Address : Node Address : Functional Addr
tr1: 08:00:5a:fd:42:c0 : 00:00:41:c9:00:b0 : b1:d0:20:9f
tr1: Token Ring Parameters Table:
tr1: Physical Addr : Up Node Address : Poll Address : AccPri : Auth
Src : Att Code :
tr1: 00:00:5b:c8 : 04:1d:53:72:82:82 : 2b:c0:a0:82:12:c1 : 2bc0 : 95a1
: 13c0 :
tr1: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame
Correl :
tr1: a0:82:12:c1:00:00 : 0000 : 1d00 : 0000 : a082 : 12c1 :
80cd :
tr1: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys :
tr1: : 24e0 : 2bc0 : 23:c7:00:00:00:00 : 00:50:41:c9 :
tr0: Adapter Address : Node Address : Functional Addr
tr0: 08:00:5a:fd:42:bf : 00:00:41:c9:00:b0 : b1:d0:20:9f
tr0: Token Ring Parameters Table:
tr0: Physical Addr : Up Node Address : Poll Address : AccPri : Auth
Src : Att Code :
tr0: 00:00:75:74 : 68:20:53:72:82:82 : 2b:c0:a0:82:12:c1 : 2bc0 : 95a1
: 13c0 :
tr0: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame
Correl :
tr0: a0:82:12:c1:00:00 : 0000 : 1d00 : 0000 : a082 : 12c1 :
80cd :
tr0: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys :
tr0: : 24e0 : 2bc0 : 23:c7:00:00:00:00 : 00:50:41:c9 :
Bj�rn
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
