Joshua Schmidlkofer wrote:
> I am setting up an IPSec tunnel (ESP) between two networks.  I can ping
> the private side of the routers, from the routers, however, I can't get
> anything else through.  It's very strange.  tcpdump shows traffic going
> in the correct direction, but nothing get's out the internal network.
> 

> 
>  ## [Begin local tunnel: 10.1.1.0/24 ] ############
>  spdadd 2.2.2.2         10.1.1.0/24  any -P in  ipsec
>     esp/tunnel/2.2.2.2-5.5.5.5/require;
>  spdadd 10.1.1.0/24          2.2.2.2 any -P out ipsec
>     esp/tunnel/5.5.5.5-2.2.2.2/require;
>  ## [End                              ] ############

If you are running the 2.6.10 kernel, then you need ipsec-tools 0.5 and
you need a -P fwd rule. See http://www.ipsec-howto.org/x277.html.

-Tom
-- 
Tom Eastep    \ Nothing is foolproof to a sufficiently talented fool
Shoreline,     \ http://shorewall.net
Washington USA  \ [EMAIL PROTECTED]
PGP Public Key   \ https://lists.shorewall.net/teastep.pgp.key
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to