Update your /etc/lilo.conf adding before "image" section:
append="mem=128M"
Then run lilo and reboot.
It works, we use a system with 192MB RAM
Mauro Quartini wrote:
>
> Hi all,
>
> I'm running Linux RH 5.1 on a PC box.
> I installed 128MB, but Linux (2.0.34) recognize only 64MB (i check via "cat
> /proc/meminfo").
> I tried to change settings in BIOS mother board, but i did never be able to
> go over 64MB.
> (changing settings in BIOS, one time, Linux was able to 'see' only 16MB of
> 128MB).
>
> Any suggestion?
>
> Thank you all in advance
>
> P.S.:
> I changed this parameter in my kernel and i recompiled it:
> /usr/include/asm/shmparam.h
> shmparam.h:#define SHMMAX 0x3000000 /* max shared seg size
> (bytes) *
>
> Mauro Quartini
> _____________________________
>
> [EMAIL PROTECTED]
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
