Folks - I need HELP !
I use a chat+pppd combination based on the ppp-HOWTO. As soon as I get my
serial connection established, I get an annoying message from pppd to say
"speed 1 not supported". What on earth does this mean, what is speed 1, and
how can I fix it ??
I'd REALLY appreciate some help on this ..
TIA .. Peter
Dec 5 15:13:27 foghorn chat[857]: Service:
Dec 5 15:13:27 foghorn chat[857]: -- got it
Dec 5 15:13:27 foghorn chat[857]: send (PPP^M)
Dec 5 15:13:27 foghorn pppd[855]: Serial connection established.
Dec 5 15:13:28 foghorn pppd[855]: speed 1 not supported
Dec 5 15:13:28 foghorn kernel: ppp_tty_ioctl: set flags to 10000
Dec 5 15:13:28 foghorn kernel: ppp_tty_ioctl: set flags to 10000
Dec 5 15:13:28 foghorn pppd[855]: Using interface ppp0
Dec 5 15:13:28 foghorn kernel: ppp_tty_ioctl: set xasyncmap
Dec 5 15:13:28 foghorn pppd[855]: Connect: ppp0 <--> /dev/ttyS1
Here's the relevant bit of my ppp-on (all on one line):
exec /usr/sbin/pppd /dev/ttyS1 38400 modem $LOCAL_IP:$REMOTE_IP connect
$DIALER_
SCRIPT file /etc/ppp/options.ttyS1.u-net
and here's my /etc/ppp/options.ttyS1.u-net:
debug 1
kdebug 1
asyncmap 200A0000
escape 11,13,ff
name mildewh
mtu 1542
netmask 255.255.255.0
idle 600
defaultroute
noipdefault
lock
modem
crtscts
---
Senior Communications Analyst
Direct: 01252-742562
Main: 01252-742555
Fax: 01252-742556
Pager: 01426-226613
Check out our Web Site at http://www.thebookseller.com/booktrak.htm
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
