First you need to configure your kernel to support your ethernet cards
Then you have to pass a parameter to the kernel at boot time, like this
ether=5,0x320,eth0 ether=10,0x340,eth1"
eth0 for the first card, eth1 for the second card, and so on
Best regards
Ivan
At 09:41 PM 23/01/1999 +0100, Martin Eriksson wrote:
>Hi!
>
>Anybody who could kindly tell me how to procede to use two (or three)
>networkcards
>on seperate lines (and ip-adresses..) as one..
>
>use the speed from serveral lines to _one_ fast..
>
>It must be possible, right?
>
>(slackware)
>
>best regards Martin
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-net" in
>the body of a message to [EMAIL PROTECTED]
>
>
----------
Iván Fernando Cuéllar Miranda
Ingeniero Consultor
Visiontech Colombia
Tel: (57-1)6292569/70/71/72/80
Fax: (57-1)6292581
Calle 114 #9-45 Torre B of. 611
Santafé de Bogotá D.C.
Colombia
----------
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
