I'm having problems getting Liunx to recognize my ethernet card.
I have a Linksys Ether16 LAN Card in my Intel box. I'm running version
2.0.36 of Linux. With the disks supplied with the card I set the card to
use IRQ 10, i/o base address 0x300, and I unenabled PnP. I'm using the ne
driver. There's nothing else on my machine using IRQ 10 or i/o port
0x300.
dmesg shows:
ne.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED])
NE*000 ethercard probe at 0x300: failed to detect IRQ line.
cat /proc/ioports shows:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-009f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : npu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037f : lp
03c0-03df : vga+
03f0-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial(auto)
e400-e403 : BusLogic BT-958
f000-f007 : IDE DMA
f008-f00f : IDE DMA
cat /proc/interrupts shows:
0: 19640 timer
1: 560 keyboard
2: 0 cascade
9: 36 + BusLogic BT-958
13: 1 math error
14: 3244 + ide0
15: 25 + ide1
After booting, running Donald Becker's NE2000 diagnostic program shows:
Checking the ethercard at 0x300.
Receive alignment error counter (0x30d) is ff
Passed initial NE2000 probe, value 00.
8390 registers: 0a 80 ff 00 42 00 ff 00 01 00 ff ff a1 00 00 00
Station Address PROM 0: 00 00 40 40 05 05 6e 6e e3 e3 5e 5e 00 00 00 00
Station Address PROM 0x10: 00 00 00 00 00 00 00 00 00 00 00 00 57 57 57 57
NE2000 found at 0x300, using start page 0x40 and end page 0x80.
Can anyone help me?
I'm leaving town in the morning for a week and I won't have access to my
computer while I'm gone.
Marshall Lake - [EMAIL PROTECTED] - http://melake.erols.com
http://melake.erols.com/~the-beach http://melake.erols.com/~genealogy
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
