I tried both :: options 3c59x options=8,8 and options 3c59x options=0,0 (I have 2 NICs) the kernel boots but I am unable to ping and all that..when I remove the line things work fine... any ideas..?? Thx, Arni Gerold Jury wrote: > > Arni Raghu wrote: > > > Hi, > > I have a couple of 3com cyclone/boomerang cards...I would like to be > > able to put them in a 10Mb mode..I know ther are auto-detecting and > > autonegotiating and they do that job well..(they run pretty well at > > 100MB).But I would like them to work as 10MB cards... > > > > options 3c59x options=xxx > > where xxx is > > Possible media type settings > 0 10baseT, or use default setting. > 1 10Mbps AUI > 2 undefined (special case: 10baseT from the LILO prompt) > 3 10base2 (BNC) > 4 100base-TX > 5 100base-FX > 6 MII (always the correct transceiver type on the 3c905) > 7 <Use default setting> > > 8 Full-duplex bit > 8 10baseT full-duplex > 12 100baseTx full-duplex > 16 Bus-master enable bit (experimental use only!) > > works for me > > Gerold - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
