---John Alexander Sanabria Ordonez <[EMAIL PROTECTED]> wrote:
>
>
> Hello at all:
>
> I had installed sucessfully Slackware 3.5, kernel 2.0.34, in one HP
Brio.
>
> The 3Com work well under Windows 95, under irq 9. But under linux
when i
> boot, appear on screen something like, the interface card have irq
> 255 and may cause not work properly, and efectively this not work
> properly.
>
> Any suggestions, thanks in advanced.
>
> John Sanabria
> Ingeniero de Sistemas
> Universidad del Valle
> Cali, Colombia
>
>
try specifying the resources using modprobe (i.e. modprobe 3comXXXX
io=0x????? irq=9) and then pass those parameters to LILO. (append)
===
*****************************************
* Renzo Alejandro Granados *
* Ingeniero en Telematica *
* Linux NetAdmin Bogota-Colombia *
* http://members.xoom.com/renzoal *
* http://softup.cjb.net *
*****************************************
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
