I know bonding dial out asynch PPP is possible but
can bonded DSL be done ? (Not all DSL is close enough to a CO
for high speeds, ergo 2 bonded low speed is desirable.)
This has utterly nothing to do with selling bandwidth.
I have a 56KB 4 wire ADN line @ 16,700 ft l.l. w 300 ft of
bridge tap... but... my DSL is 18,300+ w bridge tap unknown.
They both start at the same Bell central office (CO) and
both terminate in my office. Go figure... DSL has
lots of bridge tap which Bell says "isn't there"...
impossible.
Anyway...
My max DSL speed is maxed @ 200Kbps.
I am running remote X and its too slow (hi screen resolution
on 21 inch monitor).
I need more speed.
If DSL could be bonded I could get (400Kbps)-(some loss for
the bonding) presumably...
So my questions are: 1. does it exist now and
2. if not, is it at least
technically feasable.
Thnx
-----------------------------------------------------------------
John Heil
South Coast Software
1-714-774-6952
[EMAIL PROTECTED]
-----------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
