I've got two NIC's installed.
1. Linksys 10mb ISA card - set for 0x300 & IRQ 5
2. Intel Pro10 ISA card - set for 0x210 & IRQ 10
I'm using driver ne for the linksys
and eepro for the Intel
modprobe ne io=0x300 on boot gives:
ne.c:v1.10 9/23/94 Donald Becker ([EMAIL PROTECTED])
NE*000 ethercard probe at 0x300:<4>eth0: interrupt from stopped card
failed to detect IRQ line.
ne.c: No NE*000 card found at i/o = 0x300
/lib/modules/2.2.6/net/ne.o: init_module: Device or resource busy
Yet ifconfig eth0 gives the correct io address, and IRQ and MAC
and the card functions perfectly, I verified the IRQ and io with
cating /proc/ioports and /proc/interrupts which both list the
NE2000 card
eth1 gives the correct io address, and IRQ and MAC (but didn't have
any errors on powerup).
I played with the routing tables and have verified that both NICs
are working without any errors.
What's with the error message?
George Gallen
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
