Hello Folks
RedHat 6.0 Hedwig distribution. Chip CD.
Hardware - PII-200, 64 MB RAM. 4.3G HDD. Matshita CDROM.
Ethernet card (1)Realtek RTL8029 (2) Compex ReadyLink RL2000en
The first one gets detected PnP. The address is 0x6200 and the IRQ=10.
The second one I've not managed to getup till now.
What I've done is outlined below
I've been through the Ethernet-Howto, through Donald Becker's page
[http://cesdis.gsfc.nasa.gov/linux/misc/multicard.html] and through the
Linux admin faq at http://www.kalug.lug.net/linux-admin-FAQ/ .
I've changed the lilo.conf as specified in the Ethernet-Howto.
append = "ether=0,0,eth1 ether=0,0,eth2 ether=0,0,eth3"
I've changed the /etc/conf.modules as specified in the Ethernet-Howto
alias eth0 ne
alias eth1 ne
alias eth2 ne
options ne io=0x280,0x300,0x220
I've done what was specified at
http://www.kalug.lug.net/linux-admin-FAQ/Linux-Admin-FAQ-2.html#ss2.2
NOT TRIED : I've not tried the boot parameters at run-time options.
I've been through Donald Becker's multicard page and ne2k-pci page
[http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html]
but I've still not got the second card to work.
NOT TRIED : recompiling the kernel
Can you help????
Rajesh
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
