We use the same card on a few m/c, and it is running fine. We have
Redhat 6.0 on 15 m/c all running fine without trouble. Here is part of
dmesg on a m/c.
tulip.c:v0.89H 5/23/98 [EMAIL PROTECTED]
eth0: Digital DS21142/3 Tulip at 0xec00, 00 00 f8 07 75 82, IRQ 11.
eth0: EEPROM default media type Autosense.
eth0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2)
block.
eth0: Index #1 - Media 10baseT-FD (#4) described by a 21142 Serial PHY
(2) block.
eth0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY (4)
block.
eth0: Index #3 - Media 100baseTx-FD (#5) described by a 21143 SYM PHY (4)
block.
On Mon, 20 Dec 1999, Oommen Thomas wrote:
>
> Hi all,
>
> I have a newly installed Intel Box with a 'Digital DS21142 Tulip' NIC.
> As per the redhat site, this is supported.
> But the network doesnt come up although the card is detected fine.
> I even tried giving the IO address explicitly (taken from /proc/pci); no
> luck.
>
> Have anybody else used the same card?
> Is the problem specific to 6.0 and does it work in other versions?
> We had a crash here and are installing a new server, and we have this
> problem.
>
> I heard that 6.0 is buggy.
> And that 6.1 too.
> Pls share your experiences.
>
> My experience was very good with 5.1/5.2 and have around a dozen stable
> servers running. So, would like feedback on newer versions before moving
> over.
>
> TIA
> Oommen
>
> -====---====---====---====---====---====---====---====---====---====---====-
> to unsubscribe email "unsubscribe linux-admin" to [EMAIL PROTECTED]
> See the linux-admin FAQ: http://www.kalug.lug.net/linux-admin-FAQ/
>
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
S.G.Anand
M.Tech Student, Dept. of Computer Science & Engineering, IIT Madras, India
135, Krishna Hostel, IIT Madras, Chennai, India - 600 036
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=--=--=-=-=-=-=-=-=-=
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
