I have our test production server holding around 10Mbit 24x7.
The eepro100 with the 1.09j-t driver (should be in 2.2.15) seems stable. I've
only had time to test it to 10 days (hangs at 2 days on the older kernels).
The 3Com 905B (Cyclone) with Morton's drivers from
http://www.uow.edu.au/~andrewm/3c59x.c-2.2
is also stable as far as I've tested (hangs at 3 days on other versions).
The Tulip and Cyclone seem to give me better performance and lower CPU usage
than the Intel, but I haven't tried any formal benchmarks.
On Sat, 13 May 2000, you wrote:
> Brian wrote:
> >
> > I'm not sure if I tried 0.91.
> > I have seen the tulip driver hang on kernels 2.2.3-2.2.14 and every 2.3.x I've
> > tried. The drivers off Becker's site seem to have the same problem.
> >
> > The 3Com Cyclone and Intel eepro drivers did the same up until
> > very recently.
>
> By the way, if anyone has any suggestions for really high-performance
> 10/100bt cards/drivers, I'd like to hear them.
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
