(A little out of order)
> When it restarts i get a bunch of these:
> eepro100: wait_for_cmd_done timeout!
How does it restart? Does it just black out for a few minutes and come back, or
do you have to ifdown or rmmod it?
> The problem is my machine keeps dying after a day or so of fairly heavy net
> traffic. using 2.2.15. It was rock solid until i put network load on it.
How much is "heavy"? I'm guessing the low 20Mbit range.
Anyway, I'm on revision 1.20.2.5 (2000/03/28) right now. It's the only version
of this driver that has been stable for me under high load.
-- Brian
On Wed, 07 Jun 2000, Scott R. Every wrote:
> I have a machine using this card and driver:
> eepro100.c:v1.09j-t 9/29/99 Donald Becker
> http://cesdis.gsfc.nasa.gov/linux/driv
> ers/eepro100.html
> eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V.
> Savochkin <s
> [EMAIL PROTECTED]> and others
> eth0: Intel PCI EtherExpress Pro100 82557, 00:90:27:8D:36:FA, IRQ 21.
> Board assembly 000000-000, Physical connectors present: RJ45
> Primary interface chip i82555 PHY #1.
> General self-test: passed.
> Serial sub-system self-test: passed.
> Internal registers self-test: passed.
> ROM checksum self-test: passed (0x04f4518b).
> Receiver lock-up workaround activated.
>
>
> it was doing HEAVY processing before, but light net load with no trouble.
> It seems the card is locking up, but there are no errors in messages or
> syslog.
> Is there any way to put this card into debug mode?
> do you have any idea why its dying?
>
>
>
> then this:
> eth0: Transmit timed out: status 0000 0c90 at 0/31 command 0001a000.
> eth0: Tx ring dump, Tx queue 31 / 0:
> eth0: * 0 0001a000.
> eth0: 1 00020000.
> eth0: 2 00030000.
> eth0: 3 00030000.
> eth0: 4 00030000.
> eth0: 5 00030000.
> eth0: 6 00030000.
> eth0: 7 00030000.
> eth0: 8 200c0000.
> eth0: 9 000c0000.
> eth0: 10 00030000.
> eth0: 11 000c0000.
> eth0: 12 00030000.
> eth0: 13 000c0000.
> eth0: 14 00030000.
> eth0: 15 000c0000.
> eth0: 16 200c0000.
> eth0: 17 00030000.
> eth0: 18 00030000.
> eth0: 19 000c0000.
> eth0: 20 000c0000.
> eth0: 21 00030000.
> eth0: 22 000c0000.
> eth0: 23 00030000.
> eth0: 24 200c0000.
> eth0: 25 00030000.
> eth0: 26 000c0000.
> eth0: 27 000c0000.
> eth0: 28 00030000.
> eth0: 29 00030000.
> eth0: 30 40030000.
> eth0: =31 00000000.
> eth0: Printing Rx ring (next to receive into 0, dirty index 0).
> eth0: *= 0 00000001.
> eth0: 1 00000001.
> eth0: 2 00000001.
> eth0: 3 00000001.
> eth0: 4 00000001.
> eth0: 5 00000001.
> eth0: 6 00000001.
> eth0: 7 00000001.
> eth0: 8 00000001.
> eth0: 9 00000001.
> eth0: 10 00000001.
> eth0: 11 00000001.
> eth0: 12 00000001.
> eth0: 13 00000001.
> eth0: 14 00000001.
> eth0: 15 00000001.
> eth0: 16 00000001.
> eth0: 17 00000001.
> eth0: 18 00000001.
> eth0: 19 00000001.
> eth0: 20 00000001.
> eth0: 21 00000001.
> eth0: 22 00000001.
> eth0: 23 00000001.
> eth0: 24 00000001.
> eth0: 25 00000001.
> eth0: 26 00000001.
> eth0: 27 00000001.
> eth0: 28 00000001.
> eth0: 29 00000001.
> eth0: 30 00000001.
> eth0: l 31 c0000002.
>
> any idea what this means? i am starting to use intel cards for all my
> servers and i am now very wary as this is causing huge problems on the
> first server I've tried.
>
> Any help would be appreciated.
>
> thanx
>
> s
>
> --
> Scott R. Every - mailto:[EMAIL PROTECTED]
> EMJ Internet - http://www.emji.net
> voice : 1-888-258-8959 fax : 1-919-363-4425
> -
> To unsubscribe from this list: send the line "unsubscribe linux-net" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
