Linux-Networking Digest #268, Volume #10 Sat, 20 Feb 99 23:13:31 EST
Contents:
Win98->Linux semi-newbie (Rodney Wade)
Re: Minimum PC spec for IP masquerading??? (Rick Onanian)
Re: Win95 to Linux network via null modem cable? (Alex Yung)
linux as a netware 4 (?) client - help! ([EMAIL PROTECTED])
Re: PCI modems in linux? (Allen)
Re: PPP help ??? (bklimas)
Samba problems (Rick Westmacott)
Re: Q : for multi booting between NT and Linux (Sam Orlando)
Re: MCSE preparation exams (Jayasuthan [VorHacker])
PPP help ??? (mp)
PPP help ??? (mp)
Re: Machine name themes - what do you use? (Mark Worsdall)
***Can Linux be a WAN router??? That would be cool.*** (PDSC)
simple network setup problem (Geoff McQuilkin)
Re: Having a SLIP connection terminate after no TCP/IP activity (Ed Young)
Two questions re internet access ("Tom Barnes-Lawrence")
Re: Machine name themes - what do you use? (Phillip Helbig)
Re: Machine name themes - what do you use? (Marty Itzkowitz)
chat doesn't talk to modem ("Sylvain C�t�")
Re: @Home Networking Setup - Please help ("Darius")
Slow 3C905B (Dan Chisarick)
----------------------------------------------------------------------------
From: Rodney Wade <[EMAIL PROTECTED]>
Subject: Win98->Linux semi-newbie
Date: Fri, 19 Feb 1999 15:27:54 -0600
I have a win98 machine and a Linux redhat 5.1 box. I have Win98 setup
and shareing the harddrive. I have checked NetNeighborhood and it shows
the share.
I have my NIC configured correctly and it loads on boot. I have also
gotten my ppp0 connection to work for my ISP. I also have a SMC EtherEZ
hub.
IP #'s
linux box 192.168.0.1
WIN98 192.168.0.2
hub 192.168.0.0
Now i have tried to get them to network so that i can ping one from the
other, but no matter which one i try i can not get any packets sent. I
have 100% loss. Can anyone help me out.Thanks in advance.
Rodney Wade
------------------------------
From: Rick Onanian <[EMAIL PROTECTED]>
Subject: Re: Minimum PC spec for IP masquerading???
Date: Fri, 19 Feb 1999 17:19:04 -0500
Mike Kirk wrote:
>
> How fast of a PC would I need to do IP masquerading for 4 other PCs on my
> internal network, out through my cable modem? Would a 386 with 2 ISA
> NE2000 cards be enough? Essentially, it'll just be picking up packets off
> 1 network card, and dropping them on to the other. This doesn't seem to be
> something that would require a P2, but I don't want to lose any
> performance by having to wait on the gateway box.
>
> Any opinions are appreciated.
My 386 with 8mb RAM and no hard drive does the job quite nicely,
running linux router project (http://www.linuxrouter.org). No speed
loss whatsoever...similar setup.
> Thanks,
>
> Mike
>
> ===========================================
> Mike Kirk Tel: 416-482-7801
> Halcyon, Inc. Email: [EMAIL PROTECTED]
> URL: http://www.halcyon.ca
--
rick
===============
My opinions don't exist, and as such, are not anyone else. I do not
represent
anyone, not even myself, and especially not my employer. Cows go moo.
---
Looking for a 1968 Camaro SS convertible, black interior, beat-up
rustbucket
that is in need of a lot of restoration and TLC. Must be cheap...I'm
broke.
---
Reply to me at either thc <at sign here> psynet <dot> net or
rick <at sign> mail <dot> artmold <dot> com
------------------------------
From: [EMAIL PROTECTED] (Alex Yung)
Subject: Re: Win95 to Linux network via null modem cable?
Date: 19 Feb 1999 22:19:06 GMT
Reply-To: [EMAIL PROTECTED]
Craig Ward ([EMAIL PROTECTED]) wrote:
: I'd like to network my linux machine to my win95 notebook. For the
: time being I'm restricted to using a null modem cable. I successfully
: connected to my linux machine as a terminal only, but have no idea on
: how to setup as a proper network. I was told that I could setup pppd
: and DUN to achieve this. Any ideas on how to go about this, or
: alternative ways of doing it?
Read PPP-HOWTO section "26. Setting up a PPP server"!
------------------------------
From: [EMAIL PROTECTED]
Subject: linux as a netware 4 (?) client - help!
Date: Fri, 19 Feb 1999 22:32:47 GMT
I need to access the netware network at work. It uses NDS instead
of the bindery, I think its version 4.
I am currently running debian (of a couple of weeks ago) (I also
have a slackware partition, but am working on switching to debian...)
I downloaded the rpm from caldera, and it needs some things that
I have, but that it thinks I don't have. I'm splitting my time between
trying to fix THAT and trying the below method:
So I went digging around on debian dselect and found ncpfs and thought
COOL, here we are.
However, I'm still learning where things are on debian, and cannot
find any help info anywhere. So, the goal is to geton the Netware
network. Has anyone done this using ANY distribution other than OpenLinux?
If so, how? Or at least, point me to a web site or documentation, PLEASE!
Thanks!
Please email me at [EMAIL PROTECTED] (plus I'll watch here)
============= Posted via Deja News, The Discussion Network ============
http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own
------------------------------
From: [EMAIL PROTECTED] (Allen)
Crossposted-To: comp.os.linux.hardware,comp.os.linux.setup
Subject: Re: PCI modems in linux?
Date: 21 Feb 1999 00:54:55 GMT
First of all, we need to distinguish the terms. For anyone
trying to run Linux, anything that won't run under Linux is likely to
be considered in the same effective category as a "Winmodem", but as
that term is actually trademarked by a company -(3com or Diamond?)- no
other modem manufacturer can claim or advertise their modems as being
a "Winmodem" though none of us really care about that difference. That
doesn't stop anyone from making or selling a software, "host
controlled", or "controllerless" modem, since they can shave a few $$
of the per unit price, and still pass them off to the same folks that
they duped into getting Windows, as most of them won't know or care
about the differences.
Which ones do you have that aren't soft modems? (Q: for Bob
Stickel)-- I've returned so many Aopen PCI modems that I am not
willing to buy another one without hard model info from someone who
actually ran it under a non-windows environment.
On Sat, 20 Feb 1999 11:45:02 -0500, "Jeff Kowalczyk" <[EMAIL PROTECTED]>
wrote:
>I checked Aopen's modems out at their website, hoping that they have PCI 56K
>modems that act like generic modems. However, the two current models are
>'controllerless'. I may be mistaken, but doesn't that imply a winmodem,
>requiring CPU resources and a driver to actually accomplish anything?
>
>Bob Stickel wrote in message <7amh1l$g0n$[EMAIL PROTECTED]>...
>>I have purchased Aopen PCI 56k modems that are either PNP or manual jumper
>>settings but are not Winmodems...they're inexpensive and they work fine..
>
>
Allen
(email addy; user ID portion has a numeral one in place of word
onespoiler, and of course, delete the bogus secondary domain of nospam.)
fight spam everywhere!!!
The irony is that Bill Gates claims to making a
stable operating system and
Linus Torvalds claims to be trying to take over the world.
Linux; The Official OS of the New Millennium
http://www.linuxlink.com
------------------------------
From: bklimas <[EMAIL PROTECTED]>
Subject: Re: PPP help ???
Date: Sun, 21 Feb 1999 01:31:08 GMT
mp wrote:
> I'm new to linux, just installed rh5.2, and trying to connect to
> internet, I read ISP-HOOK UP - HOWTO, and followed exactly the steps,
> when I connect ( by typing those commands, or run a script) I got back
> out to the log- in screen ( just like when I first log in ) what do I
> have to do , any advice would be appriciated,
I (newbie too, but with working ppp) put a web page explaining
more or less what I have done to get ppp working:
http://www.magma.ca/~bklimas/
Hope this helps. Best regards,
b.k.
------------------------------
From: Rick Westmacott <[EMAIL PROTECTED]>
Subject: Samba problems
Date: Sun, 21 Feb 1999 01:35:35 +0000
It seems that smbd and nmbd are attempting to load as part of the boot
process. However when i do a ps aux | grep smbd, it has not started.
Next when I do a ./smb status, I get the message that both the smbd and
nmbd are in fact running. If I execute this command many times I get
the message that the processes are running but each time under different
PIDS. It looks like the processes are dying and being brought up
repeatedly. Other than that i seem to have a healthy TCP network and
can ping my windows 98 PC's alright.
Any ideas would be appreciated.
Thanks
Rick
------------------------------
From: Sam Orlando <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Subject: Re: Q : for multi booting between NT and Linux
Date: Fri, 19 Feb 1999 18:06:30 -0500
wllee wrote:
> I set up the LILO for multi booting between windows NT and linux.
> But LILO didn't work correctly.
>
> LILO did not wait for user keyboard input. This boot only default.
> What is the problem?
>
> p.s. LILO does not contain the NTFS format. So I select OS2 for NT.
Make sure that you update lilo after adjusting the boot table in it.
Also make sure your dely is more then 1 or 0... i use 10 secs till it
defualts....
------------------------------
From: Jayasuthan [VorHacker] <[EMAIL PROTECTED]>
Subject: Re: MCSE preparation exams
Crossposted-To: comp.os.linux.misc,comp.os.linux.setup,comp.os.linux.x
Date: 19 Feb 99 22:55:59 GMT
In comp.os.linux.misc [EMAIL PROTECTED] wrote:
Is this guy lost or what !
: I have MCSE exam simulation prep materials for sale, $20 US each. Email for
: more information and list if interested.
: -----------== Posted via Deja News, The Discussion Network ==----------
: http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own
--
==========
Jayasuthan
[Internal Linux System]
http://eplx01/suthan/
smtp%"[EMAIL PROTECTED]"
[External]
http://still.working.on
smtp%"[EMAIL PROTECTED]"
------------------------------
From: mp <[EMAIL PROTECTED]>
Subject: PPP help ???
Date: Fri, 19 Feb 1999 19:05:34 -0500
I'm new to linux, just installed rh5.2, and trying to connect to
internet, I read ISP-HOOK UP - HOWTO, and followed exactly the steps,
when I connect ( by typing those commands, or run a script) I got back
out to the log- in screen ( just like when I first log in ) what do I
have to do , any advice would be appriciated,
------------------------------
From: mp <[EMAIL PROTECTED]>
Subject: PPP help ???
Date: Fri, 19 Feb 1999 19:07:00 -0500
I'm new to linux, just installed rh5.2, and trying to connect to
internet, I read ISP-HOOK UP - HOWTO, and followed exactly the steps,
when I connect ( by typing those commands, or run a script) I got back
out to the log- in screen ( just like when I first log in ) what do I
have to do , any advice would be appriciated,
------------------------------
From: Mark Worsdall <[EMAIL PROTECTED]>
Crossposted-To:
vmsnet.networks.misc,microsoft.public.windowsnt.domain,comp.unix.solaris,comp.os.os2.networking.server,comp.os.ms-windows.nt.admin.networking,comp.infosystems.www.servers.unix,comp.protocols.tcp-ip.domains
Subject: Re: Machine name themes - what do you use?
Date: Sun, 21 Feb 1999 01:23:32 +0000
In article <[EMAIL PROTECTED]>, bill robison <[EMAIL PROTECTED]>
writes
>
>But what do you say when someone calls you up to say that elvis is
>down? "No kidding?" <g>.
>
Thats why I choose famous blond Sexy women
"Hey Madona has gone down" - On who:-)
"How do I get into Hilary" - Try Tunneling:-0
Oh it just goes on and on, and what is really good is that the fundement
religious types get a kick out of saying it since they belive they are
not being sinful!"
--
Mark Worsdall - Oh no, I've run out of underpants :(
Home:- [EMAIL PROTECTED] WEB site:- http://www.worsdall.demon.co.uk
Shadow:- [EMAIL PROTECTED] WEB site:- http://www.shadow.org.uk
Work:- [EMAIL PROTECTED] WEB site:- http://www.hinwick.demon.co.uk
TCP/IP gatewaying http://www.hinwick.demon.co.uk/computerDept/
------------------------------
From: [EMAIL PROTECTED] (PDSC)
Subject: ***Can Linux be a WAN router??? That would be cool.***
Date: Tue, 16 Feb 1999 21:24:18 GMT
Upmost Network Gurus:
Is it possible for a Linux box to act as a WAN router?
Right now, I'm using a Cisco 1601 router with a 56k FrameRelay
connection to PSINet. I have to upgrade to a fractional T1 line and I
would love dearly to use Linux.
What hardware/vendor do I use? Pls post response here.
Thanks,
Bud
------------------------------
Date: Sat, 20 Feb 1999 17:45:39 -0800
From: Geoff McQuilkin <[EMAIL PROTECTED]>
Subject: simple network setup problem
I've got a simple redhat 5.2 setup going but a networking piece must be
missing. I can ping other machines on the network (and thus ethernet
card working ok) but can't ping self at either 127.0.0.1 or IP address.
I take it this is a symptom of the problem giveing me trouble elsewhere
too. any suggestions appreciated!
--
..
...
....
Geoff McQuilkin
------------------------------
From: Ed Young <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc
Subject: Re: Having a SLIP connection terminate after no TCP/IP activity
Date: 21 Feb 1999 01:47:21 GMT
Fred Heitkamp wrote:
>
> I often have my PC downloading large files over a SLIP connection to my
> ISP. I was wondering if there is a utility to watch the TCP/IP activity
> and execute my SLIP stop script after the activity stops. I'm thinking
> along the lines of the dialer in OS Warp that has a Hangup after x
> minutes of no activity feature.
>
> --
> Fred
I use diald and ppp. diald has the capability to shutdown an idle
connection after a specified number of seconds. This works well
for me. I also don't have to dial, as diald takes of this for me
automagically when I try to access a URL or an ftp site. It also
dials on my computer when my son or wife access the net from their
computers. It's a good program...
------------------------------
From: "Tom Barnes-Lawrence" <[EMAIL PROTECTED]>
Subject: Two questions re internet access
Date: Sat, 20 Feb 1999 00:04:34 -0000
Hello, sorry if this isn't the appropriate NG for this post:
Our family recently got internet access at home, with
the UK ISP Freeserve. It's connected to the sort of family computer,
which I had previously installed Red-Hat on (forget which version, it was
from an old Dev-Res CD set), and currently running under win 95.
I'm not exactly a Linux newbie, as I've been using it on *my* machine
for about 2 years now (mutilated version of Slackware); I've had it
connected to a network for a short time (with my Uni flatmates last year)
with a bit of success.
ANYHOW. I'm getting *really* fed up with having to use win95 to connect
to the internet- various things are annoying me like the way the "Log on as
user Foo" options work-or don't. I really need to set up Linux on at least
*one* of the machines to be able to connect to the ISP.
So:Firstly, has anyone got any experience with using this ISP
(Freeserve, in UK)? Does it need anything odd? Does it work at all with
Linux? They have the helpline, but it's �1 per minute and they'd probably
say "whats a Linux?", or "Get Win95" or something.
Secondly, can anybody point me in direction of *any* appropriate docs
for anything neccessary for connecting to an ISP? I'm sure I've seen a
PPP-Howto, but are there any other How-Tos that would be relevant, or docs
from any other source? Linux PPP for Dummies? What I know about PPP could be
written on the back of a list of the good features of MS Outlook Express.
Anything would be welcome!
Oh yeah, before I forget, I removed most of the network config type
files from my Linux box when I removed it from the network (it kept
complaining because it couldn't find anything). I don't think it had any
stuff like firewalling or whathaveyou at the time, just IP, I think. We
managed to telnet to each other's machines, and possibly we had ftp too, but
little else. So perhaps those docs ought to include stuff on IP and
networking and remote X connections, etc.
I don't use Usenet *every* night, could you email suggestions?
--
Tom Barnes-Lawrence (aka Tomble the Bod)
Kindly remove eggs and spam from email address to
email me.
Apologies for any glitches in post, blame windoze.
------------------------------
From: [EMAIL PROTECTED] (Phillip Helbig)
Crossposted-To:
vmsnet.networks.misc,microsoft.public.windowsnt.domain,comp.unix.solaris,comp.os.os2.networking.server,comp.os.ms-windows.nt.admin.networking,comp.infosystems.www.servers.unix,comp.protocols.tcp-ip.domains
Subject: Re: Machine name themes - what do you use?
Date: 21 Feb 1999 01:42:27 GMT
Reply-To: [EMAIL PROTECTED]
In article <[EMAIL PROTECTED]>, bill robison <[EMAIL PROTECTED]> writes:
> But what do you say when someone calls you up to say that elvis is
> down? "No kidding?" <g>.
If you have an unreliable machine, how about Lewinsky---always going
down on me!
> > We have used dead rock stars up to now. Hendrix is our main box,
> > with lennon (mine at home), valens, bonham, elvis, joplin, vaughan,
> > and jones in use so far. Scalability has _not_ been a problem. ;-)
Some guy has a cluster with George, Paul, Ringo and Dedguy.
--
Phillip Helbig Email ......... [EMAIL PROTECTED]
Nuffield Radio Astronomy Laboratories Tel. ... +44 1477 571 321 (ext. 2635)
Jodrell Bank Fax ................ +44 1477 571 618
Macclesfield Telex ................ 36149 JODREL G
UK-Cheshire SK11 9DL Web ... http://www.jb.man.ac.uk/~pjh/
My opinions are not necessarily those of NRAL or the University of Manchester.
------------------------------
From: Marty Itzkowitz <[EMAIL PROTECTED]>
Crossposted-To: comp.unix.solaris
Subject: Re: Machine name themes - what do you use?
Date: Sat, 20 Feb 1999 15:55:42 -0800
I used herb names for a set of lab machines:
parsley, sage, rosemary, thyme, basil, arugula, ...
At a previous company, one set of lab machines was named
after defunct computer companies:
cydrome, multiflow, vitesse, ...
Marty Itzkowitz
------------------------------
From: "Sylvain C�t�" <[EMAIL PROTECTED]>
Subject: chat doesn't talk to modem
Date: Fri, 19 Feb 1999 19:54:39 -0500
I have a Slackware distribution of linux. The kernel version is 2.0.27. I
have a SupraExpress 33.6 PnP modem configured with COM3 (port=0x3E8) and
irq=5. I run the isapnp tool and do a warm boot. When I run minicom I can
talk to the modem. When I try chat it seems there is no respond from the
modem. I try this command: chat "" AT OK "" just to see if chat can
talk to modem, but the chat command wait until the default timeout. I would
like to know if there is something to configure to make the chat command
sees my modem. This will help me to make my ppp connection.
If any one have an idea let me know, I need help for this.
Sylvain Cote
------------------------------
From: "Darius" <[EMAIL PROTECTED]>
Subject: Re: @Home Networking Setup - Please help
Date: Sat, 20 Feb 1999 23:55:53 GMT
Hi Folks,
I am in a similar predicament with a Fresh install of SuSE 6.0. I can
ping the Nic and localhost, but I have 100% packet loss pinging the gateway
or the nameserver on the Cox network. I am really just getting into this
for the first time with any depth now that I have a dedicated machine to run
linux. I have all the networking info that Cox supplies. It all works on
my gaming box through the same IP. I switch out when I switch machines.
The Linux box is running a 3c509 and it works fine under another OS.
(previously running on the same hardware config). Any Help would be
greatly appreciated.
Darius
Rick Onanian wrote in message <[EMAIL PROTECTED]>...
>
>
>PDSC wrote:
>>
>> Howdy Dude:
>>
>> I have a similar setup with a CyberSurfer and RH5.2 Linux. I followed
>> the standard RH setup and filled in the network info when prompted.
>> It works like a champ and I didn't have to edit any shell scripts. Is
>> your modem being detected correctly? I used a Netgear NIC with the
>> Tulip chipset. Can you ping the NIC? Can you ping your default
>> gateway? @home should have provided you with a yellow paper
>> describing all the server IP addresses for dns, gateway, etc...
>>
>> Dude
>
>I have used slackware, debian, and mandrake on my @home cablemodem.
>No problem.
>
>I think the original poster was trying to use DHCP rather then set
>up as a regualr network.
>
>> On Tue, 16 Feb 1999 22:46:54 GMT, "LingDragon" <[EMAIL PROTECTED]>
>> wrote:
>>
>> >I have the Mandrake 5.3 distribution (RH 5.2) and am trying my best to
get
>> >the @home network service setup on my linux machine. I have already
>> >disabled plug and pray, set the nic to irq 10, addr 300 and was able to
get
>> >the little pc connection light on the modem to turn on. I am using TCI
w/
>> >cybersurfer. I have seen reply's to questions like this: (but I
haven't a
>> >clue as to what this is, whether it is a script, text file, command?)
>> >
>> >#! /bin/sh
>> ># /etc/init.d/networks
>> >PATH="/bin:/sbin:/usr/bin:/usr/sbin"
>> ># uncomment and edit username for @Home cable modems--
>> >#OPT_USER_ID="-h username"
>> >ifconfig lo 127.0.0.1
>> >route add -net 127.0.0.0 netmask 255.0.0.0 lo
>> >if dhcpcd $OPT_USER_ID -d eth0 ; then
>> > /usr/local/bin/dhcp_host_ip
>> > echo "DHCP succeeded..."
>> > logger "DHCP succeeded..."
>> >fi
>> >
>> >
>> ># DO NOT EDIT THIS FILE - edit the master and reinstall.
>> ># (/tmp/crontab.XXXXa00375 installed on Fri Feb 12 00:58:32 1999)
>> ># (Cron version -- $Id: crontab.c,v 2.13 1994/01/17 03:20:37 vixie Exp
$)
>> >SHELL=/bin/sh
>> >PATH=/usr/local/bin:/usr/local/bin:/bin:/sbin:/usr/bin:/usr/sbin
>> >*/20 * * * * exec /usr/local/bin/dhcp_host_ip
>> >
>> >
>> >#!/bin/sh
>> ># /usr/local/bin/dhcp_host_ip
>> ># cron script to transfer dhcpcd's IP to /etc/hosts
>> >PATH=/sbin:/bin:/usr/bin
>> >HOST=$( hostname )
>> >HOST_IP=$( ifconfig eth0 | grep "inet addr" - | cut -d: -f2 - | cut -d"
>> > -f1
>> >- )
>> >LINE_OLD=$( grep -G ${HOST}'$' /etc/hosts | grep -v '^;' - )
>> >LINE_NEW=${HOST_IP}" "${HOST}
>> >sed s/"$LINE_OLD"/"$LINE_NEW"/ /etc/hosts > /tmp/.hosts.tmp
>> >mv /tmp/.hosts.tmp /etc/hosts
>> >
>> >
>> >Could someone please elaborate on this subject in detail? Thanks alot.
>> >
>> >PS. Please keep in mind that some of us are somewhat new to linux
(three
>> >days or so)
>> >
>> >Dave
>> >
>> >
>> >
>
>--
> rick
>---------------
>My opinions don't exist, and as such, are not anyone else. I do not
>represent
>anyone, not even myself, and especially not my employer. Cows go moo.
>---
>Looking for a 1968 Camaro SS convertible, black interior, beat-up
>rustbucket
>that is in need of a lot of restoration and TLC. Must be cheap...I'm
>broke.
>---
>Reply to me at either thc <at sign here> psynet <dot> net or
>rick <at sign> mail <dot> artmold <dot> com
------------------------------
From: Dan Chisarick <[EMAIL PROTECTED]>
Subject: Slow 3C905B
Date: Sat, 20 Feb 1999 22:52:42 -0500
I've been poking around newsgroups the better part of half a day
trying to get my shiny new 3Com 3C905B working under linux. Getting it
working was fairly easy (testament to the quality and quantity of
information available out there).
Though after I got it lit up, performance was hideous. It was worse
than the ISA LinkSys card that it replaced. That and 'ifconfig'
reported errors out the wazoo.
I downloaded 3Com's configuration tools and booting under DOS
(bleah) turned off auto-detection for the link speed (manually set it to
10/mbs since I only have a 10/mbs hub). Set the optimization for
maximum throughput for good measure. Restarted and it performed at the
level I would expect. I guess autodetect doesn't play nice w/slow hubs,
or at least mine.
Dan
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.networking) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Networking Digest
******************************
