Linux-Networking Digest #952, Volume #10 Sat, 24 Apr 99 06:13:37 EDT
Contents:
Re: Linux, Win95/98, Samba and "Dial-up Networking" (Pekka Savola)
Re: Linux/98/NT Network (mist)
Re: Subnet question (mist)
Re: hacked (mist)
Drivers for 100Mbps Ethernet Cards ("Anthony M. Spencer")
Switch (Pavel Greenfield)
Re: [?]Dial in to my Linux box from the outside (Bob Tennent)
Bandwidth Watcher/Monitor Help/Info Needed ([EMAIL PROTECTED])
Re: What does this ICMP means? (EVILjosh)
Re: ipchains configuration (Pekka Savola)
TIS FWTK Compilation Problems (Dennis)
Re: Kernel 2.2.6 netwoking bug? (Randy Sandberg)
Re: Kernel 2.2.6 netwoking bug? (Randy Sandberg)
Re: NFS update delay (Andrew Richards)
HELP!!!!!! FILE System error ("Fenton Mok")
Re: Two network cards (Vidar Andresen)
Re: Samba vs. NFS ([EMAIL PROTECTED])
Re: Network unreachable, cable modem, 2 NICs ([EMAIL PROTECTED])
----------------------------------------------------------------------------
From: [EMAIL PROTECTED] (Pekka Savola)
Subject: Re: Linux, Win95/98, Samba and "Dial-up Networking"
Date: Sat, 24 Apr 1999 05:49:32 GMT
>... in other words, I specify the local IP address in Window's TCP/IP
>configuration. I was just concerned, because the ISP's directions said
>to choose Dynamic allocation there. If dial-up adapter can still assign a
>dynamic address and route most packets that way, then it should
>work. Is this correct?
You specify local IP address in Windows TCP/IP configuration for
_ethernet card_. For dial-up adapter, you can still choose either
dynamic IP assignment or static IP assignment. For every adapter, you
can choose a different IP.
Only possible problem might be that unlike IP addresses, default
gateways, etc., there can be only on DNS configuration. If you need
to use internal DNS, this might cause problems if you don't know what
you're doing.
Anyway, it will work.
>If what I wrote above is true, then I have another question: does Win
>have a routing table? If not, how can I tell it to talk to the linux box
>when it sees its IP address but send everything else via the dial-up
>adapter?
Yes, it does. Try 'route print' in a dos prompt.
Pekka Savola pekkas at netcore dot fi
---
Across the nations the stories spread like spiderweb laid upon spiderweb,
and men and women planned the future, believing they knew truth. They
planned, and the Pattern absorbed their plans, weaving toward the future
foretold. -- Robert Jordan: The Path of Daggers
------------------------------
From: mist <[EMAIL PROTECTED]>
Subject: Re: Linux/98/NT Network
Date: Sun, 18 Apr 1999 11:38:44 +0100
Reply-To: mist <new$[EMAIL PROTECTED]>
Stone <[EMAIL PROTECTED]> scribed to us that -
>I am a newbie to Linux (less than a week on this OS)
>
>I want to basicly do the same thing but i have a stupid winmodem in my
> win98
>machine that i want to use to dial the internet and then use a proxy
> app to
>have linux connect to and be able to see the internet. Is this
> possible??
I believe so, but it's far more complex and involved than getting a real
modem, putting it in the linux box and then connecting with that.
>
>Also I would like to do printer shareing from the WIN98 machine to allow linux
>to print to this printer. Can I also do this??
You need to use SAMBA.
<snip>
--
Mist.
------------------------------
From: mist <[EMAIL PROTECTED]>
Subject: Re: Subnet question
Date: Sun, 18 Apr 1999 11:43:07 +0100
Reply-To: mist <new$[EMAIL PROTECTED]>
Luca Filipozzi <[EMAIL PROTECTED]> scribed to us that -
>> Am I correct that only traffic with an address on the other subnet gets
>> routed?
Trafic on one subnet will not pass to the other unless you have
masquerading active on the Linux box.
I would not use .255, as this is a special address, use something like
192.168.1.* and 192.168.0.* for the two different subnets. Then you can do
something like
ifconfig eth0 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255 up
ifconfig eth0 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 up
route add -net 192.168.0.0 eth0
route add -net 192.168.1.0 eth1
Or whatever.
--
Mist.
------------------------------
From: mist <[EMAIL PROTECTED]>
Subject: Re: hacked
Date: Sun, 18 Apr 1999 11:47:11 +0100
Reply-To: mist <new$[EMAIL PROTECTED]>
jack <[EMAIL PROTECTED]> scribed to us that -
>Does this mean that I've been hacked???
I should say so.
>Coul;d have this person have done any damage??
More than likely. Unless they were just playing around.
>And am installing kernel 2.2.6 with ip chains, will this help to ensure
>that I'm safe???
If I were you, I would re-install this box, and change the passwords.
They could have left trojan programs and/or taken all your passwords
(including your dial-up password if you have it on the box.)
>
>
>in.telnetd[12023]: connect from [EMAIL PROTECTED]
>Apr 17 11:14:22 jack telnetd[12023]: ttloop: peer died: Success
>Apr 17 11:14:23 jack imapd[12024]: connect from [EMAIL PROTECTED]
>Apr 17 11:14:23 jack in.pop3d[12025]: connect from [EMAIL PROTECTED]
>Apr 17 11:14:23 jack wu.ftpd[12027]: connect from [EMAIL PROTECTED]
>Apr 17 11:14:23 jack in.telnetd[12028]: connect from [EMAIL PROTECTED]
>Apr 17 11:26:37 jack mountd[76]: [truncated] NFS mount of
<snip>
Do you really need all those services running? After your reinstall,
comment some of them out of /etc/inetd.conf and make sure you're using
TCP wrappers and have proper /etc/hosts.deny and hosts.allow files.
Check man hosts_deny man hosts_access and stuff.
--
Mist.
------------------------------
From: "Anthony M. Spencer" <[EMAIL PROTECTED]>
Subject: Drivers for 100Mbps Ethernet Cards
Date: Sat, 24 Apr 1999 06:46:47 GMT
I have bought a SOHOware 100Mbps PCI Fast Ethernet kit and a NETGEAR FA
310tx Fast Ethernet PCI Adapter. I don't know which drivers to use for
them. Is there a quick way to find out? Any information would be
appreciated.
------------------------------
From: Pavel Greenfield <[EMAIL PROTECTED]>
Crossposted-To: comp.os.ms-windows.networking.misc
Subject: Switch
Date: Sat, 24 Apr 1999 02:55:44 +0000
Hi,
I have purchased a D-Link 5 port switch and it works well enough....
However, its fan is very *very* noisy. I would say it's about 20 times
the normal buzz of a computer and a monitor. (In other words, it's like
being surrounded by 20 compters and monitors :)
Is this typical or can I find a quiet switch?
Thanks.
Pavel
------------------------------
From: [EMAIL PROTECTED] (Bob Tennent)
Subject: Re: [?]Dial in to my Linux box from the outside
Date: 23 Apr 1999 19:32:59 GMT
Reply-To: rdt(a)cs.queensu.ca
On 23 Apr 1999 15:10:01 -0400, Max wrote:
>
>I'm interested in dialing in to my Linux box at home
>from my laptop while I'm on the road.
>
>What do I need to know and where do I find the info?
>
You don't tell us how your Linux box is connected. You can't
"dial in" if it's not connected! If you have a full-time network
connection, you just need to learn about telnet or ssh. If
you connect with a modem using PPP, you'll have to get someone at home
to connect for you and somehow give you the IP address, for example
by e-mail.
Bob T.
------------------------------
From: [EMAIL PROTECTED]
Subject: Bandwidth Watcher/Monitor Help/Info Needed
Date: Sat, 24 Apr 1999 07:17:07 GMT
I run a Redhat 5.2 server and have it co-located elsewhere. My
provider has now decided to get slick and bill for bandwidth usage.
However my web stat program and their usage stats don't agree. I was
told this by my provider
"We run a bay networks ethernet switch, which allows us to snmp poll
each 'ethernet port' every 5 minutes, and generate statistics for your
server. We monitor bandwith into, and out of, your server and tally it
up."
My question is how or where do I find a program, perferably RPM based,
to monitor my bandwidth usage at my eithernet card.
Please Email me at: [EMAIL PROTECTED]
-----------== Posted via Newsfeeds.Com, Uncensored Usenet News ==----------
http://www.newsfeeds.com/ The Largest Usenet Servers in the World!
=========== Over 72,000 Groups, Plus Dedicated Binaries Servers ==========
------------------------------
From: EVILjosh <[EMAIL PROTECTED]>
Crossposted-To: comp.protocols.tcp-ip,linux.redhat.misc
Subject: Re: What does this ICMP means?
Date: Sat, 24 Apr 1999 00:37:08 -0400
> There is no ICMP Error Message for failed checksum. Therefore, I would
> take it that this message indicates that the checksum from an ICMP
> message was incorrect. Such events could result from somebody trying to
> hack up an ICMP message by hand. One way to stop this would be to block
> ICMP messages in your firewall.
But not all ICMP. If he does his Path-MTU discovery is going to break
and he'll then wonder why his mail isn't getting through etc, etc, etc.
Blocking ICMP has to be done selectively so that services that rely on
it don't get broken.
Try:
http://www.worldgate.com/~marcs/mtu/
Yours,
Josh...
_/_/_/ _/ _/ _/ _/
_/_/ _/ _/ _/ _/
_/_/_/ _/ _/ _/_/
------------------------------
From: [EMAIL PROTECTED] (Pekka Savola)
Subject: Re: ipchains configuration
Date: Sat, 24 Apr 1999 08:27:27 GMT
>For example, 192.168.1.2 trough to 192.168.1.130 but I want 192.168.1.56
>to be seen on the internet....How do I go about doing this using the
>rc.local and /sbin/ipchains commands?
What kind of setup are you talking about now?
How are those computers connected to Internet? Where is your Linux
server located in the network, and what are it's functions? Do you
have a valid non-private IP address for that one computer also, or are
you doing masquerading/NAT for all computers, but only one should
actually have a working internet connection?
Setting ipchains rulesets would probably go something like this:
(first accept from the allowed ones, then deny/reject the rest)
ipchains -A input -j ACCEPT -d 192.168.1.56/32
ipchains -A input -j DENY -d 192.168.1.0/24
ipchains -A output -j ACCEPT -s192.168.1.56/32
ipchains -A output -j DENY -s192.168.1.0/24
Pekka Savola pekkas at netcore dot fi
---
Across the nations the stories spread like spiderweb laid upon spiderweb,
and men and women planned the future, believing they knew truth. They
planned, and the Pattern absorbed their plans, weaving toward the future
foretold. -- Robert Jordan: The Path of Daggers
------------------------------
From: [EMAIL PROTECTED] (Dennis)
Subject: TIS FWTK Compilation Problems
Date: Sat, 24 Apr 1999 08:29:24 GMT
Hello,
I am running red hat 5.2 and have been trying to compile and install
fwtk for quite some time now. I constantly get these errors and have
found others with the same problem but no answers. Any help or
direction would be greatly appreciated.
Does anyone know of another good firewall to use other than fwtk?
Dennis
make
for a in lib auth smap smapd netacl plug-gw ftp-gw tn-gw rlogin-gw
http-gw x-gw; do \
( cd $a; echo all: `pwd`; make all ); \
done
all: /usr/src/fwtk/lib
make[1]: Entering directory `/usr/src/fwtk/lib'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/lib'
all: /usr/src/fwtk/auth
make[1]: Entering directory `/usr/src/fwtk/auth'
cc -g -static -o authsrv authsrv.o proto.o db.o pass.o srvio.o
../libauth.a ../libfwall.a -lgdbm
pass.o: In function `passverify':
/usr/src/fwtk/auth/pass.c:39: undefined reference to `crypt'
pass.o: In function `passset':
/usr/src/fwtk/auth/pass.c:70: undefined reference to `crypt'
make[1]: *** [authsrv] Error 1
make[1]: Leaving directory `/usr/src/fwtk/auth'
all: /usr/src/fwtk/smap
make[1]: Entering directory `/usr/src/fwtk/smap'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/smap'
all: /usr/src/fwtk/smapd
make[1]: Entering directory `/usr/src/fwtk/smapd'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/smapd'
all: /usr/src/fwtk/netacl
make[1]: Entering directory `/usr/src/fwtk/netacl'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/netacl'
all: /usr/src/fwtk/plug-gw
make[1]: Entering directory `/usr/src/fwtk/plug-gw'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/plug-gw'
all: /usr/src/fwtk/ftp-gw
make[1]: Entering directory `/usr/src/fwtk/ftp-gw'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/ftp-gw'
all: /usr/src/fwtk/tn-gw
make[1]: Entering directory `/usr/src/fwtk/tn-gw'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/tn-gw'
all: /usr/src/fwtk/rlogin-gw
make[1]: Entering directory `/usr/src/fwtk/rlogin-gw'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/rlogin-gw'
all: /usr/src/fwtk/http-gw
make[1]: Entering directory `/usr/src/fwtk/http-gw'
cc -I.. -g -DLINUX -c error.c -o error.o
error.c:126: parse error before `('
error.c:133: parse error before string constant
error.c:134: warning: parameter names (without types) in function
declaration
error.c:134: warning: data definition has no type or storage class
error.c:135: parse error before string constant
error.c:135: warning: data definition has no type or storage class
error.c:136: parse error before string constant
error.c:136: warning: data definition has no type or storage class
error.c:143: parse error before string constant
error.c:144: warning: parameter names (without types) in function
declaration
error.c:144: warning: data definition has no type or storage class
error.c:145: parse error before string constant
error.c:145: warning: data definition has no type or storage class
error.c:146: parse error before string constant
error.c:146: warning: data definition has no type or storage class
error.c:153: parse error before string constant
error.c:153: warning: data definition has no type or storage class
error.c:159: parse error before string constant
error.c:159: warning: data definition has no type or storage class
error.c:176: parse error before `('
error.c:180: parse error before `...'
error.c:184: parse error before `if'
error.c:188: initializer element is not constant
error.c:188: warning: data definition has no type or storage class
error.c:189: parse error before `if'
error.c:195: warning: parameter names (without types) in function
declaration
error.c:195: warning: data definition has no type or storage class
error.c:196: parse error before `void'
error.c:200: warning: parameter names (without types) in function
declaration
error.c:200: warning: data definition has no type or storage class
error.c:201: parse error before `if'
make[1]: *** [error.o] Error 1
make[1]: Leaving directory `/usr/src/fwtk/http-gw'
all: /usr/src/fwtk/x-gw
make[1]: Entering directory `/usr/src/fwtk/x-gw'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/usr/src/fwtk/x-gw'
------------------------------
From: Randy Sandberg <[EMAIL PROTECTED]>
Subject: Re: Kernel 2.2.6 netwoking bug?
Date: Sat, 24 Apr 1999 01:23:32 -0700
Paul Black wrote:
>
> Honest questions are never silly.
>
> I had the same. When if-up is run, ifconfig adds a route. The next couple
> of lines on from ifconfig add a route. Therefore two routes. I took out the
> extra lines and only one route was created. When I rebooted, I found that
> there was no route for localhost! It didn't appear to prevent routeing to
> localhost. I haven't bothered to change it back yet. I also haven't been
> bothered to check if there is an ifconfig option to not add a route. It's
> not really a problem even if it does look silly.
>
> Paul
Thanks for the kind words as well as the support. This info should help
me solve my problem. Thanks again.
--
Randy Sandberg [EMAIL PROTECTED]
I have a problem with a revolution in that if you have a
revolution, then afterwards you become the establishment.
We should not try to dominate. --Linus Torvalds
------------------------------
From: Randy Sandberg <[EMAIL PROTECTED]>
Subject: Re: Kernel 2.2.6 netwoking bug?
Date: Sat, 24 Apr 1999 01:33:41 -0700
Scott Wood wrote:
>
>RedHat has an update to the initscripts package, and many other packages, >which are
>fixed to work with the 2.2 kernel's behavior. These can be found >at:
>
> ftp://updates.redhat.com/5.2/kernel-2.2/i386/
> --
> +---------------------+--------------------------+
> | Scott Wood | Test & Integration |
> | [EMAIL PROTECTED] | Specialist |
> |=====================+==========================|
> | BroadLink Communications |
> | -={ High Speed Wireless Networks }=- |
> +------------------------------------------------+
Before building the 2.2.6 kernel, and being a newbie, I made sure to
RTFM and did update all the suggested RedHat packages at:
ftp://updates.redhat.com/5.2/kernel-2.2/i386/
But, once I built the new kernel and rebooted the system... double eth0
statements. Now, if I reboot to kernel 2.0.36-X all is fine. But, kernel
2.2.6 with initscripts-3.78-2.4.i386.rpm still give me the problem!
[root@speed i386]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
sdn-ar-002casfr * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default sdn-ar-002casfr 0.0.0.0 UG 0 0 0 ppp0
Please remember, I stated in my original post that "I'm just a newbie at
this stuff" so if I'm doing something stupid... I'm sorry.
--
Randy Sandberg [EMAIL PROTECTED]
I have a problem with a revolution in that if you have a
revolution, then afterwards you become the establishment.
We should not try to dominate. --Linus Torvalds
------------------------------
From: Andrew Richards <[EMAIL PROTECTED]>
Subject: Re: NFS update delay
Date: 24 Apr 1999 08:37:20 GMT
We're having the same problem with the same setup (RH5.2+updates, 2.2.5,
100baseT, SMP). From what I have been able to determine updates seem to be
occuring every 12 seconds so the delay is somewhere between 0 and 12 seconds
but can be up to 30s under some circumstances. If the client is a 2.0.3x
machine the delay is usually less than 1 second. Using solaris as the client
also leads to sub-second delays.
These times were measured by eye using: watch -n 1 cat testfile
This is presumably some sort of NFS caching problem which leads to some rather
nasty race conditions. Any help would be appreciated.
Cheers,
Andrew
=====
All those moments will be lost in time - like tears in rain. Time to die.
John Rowe <[EMAIL PROTECTED]> wrote:
> We're running RedHat 5.2 with kernel 2.2.x and 100baseT
> networking. People are noticing that if we change a local file on one
> machine and then look at it on a remote linux machine we often see the
> OLD version of the file for several seconds. This only happens if the
> remote machine is linux - our SGI/Irix clients don't have this
> problem.
> The problem occurs whether the server is Linux or SGI.
> Any ideas?
> TIA
> John
------------------------------
From: "Fenton Mok" <[EMAIL PROTECTED]>
Subject: HELP!!!!!! FILE System error
Date: Fri, 23 Apr 1999 22:12:17 -0700
Dear Novell Experts,
I have recently try to create an directory under the Novell 3.11 file
server. I have already loaded the OS2 name space. I tried to create the
directory �s_�_�__ in my server (which is actually a chinese phase in ascii
form). The system successfully created this directory for me; however, after
then I cann't access this directory any more. Not even delete it. It always
gives "file doesn't exist" when I try to accessit, and "file system error
(1026)" when I try to delete it. I have tried to use the vrepair but it
says there is no error in the file server... Can anyone help me ! Thanx
------------------------------
From: [EMAIL PROTECTED] (Vidar Andresen)
Subject: Re: Two network cards
Date: Sat, 24 Apr 1999 07:36:31 +0200
In article <Hp8U2.9164$[EMAIL PROTECTED]>,
"David K. Means" <[EMAIL PROTECTED]> wrote:
>
>Zoltan Pittner <[EMAIL PROTECTED]> wrote in message
>news:[EMAIL PROTECTED]...
[...]
>> [snip]
>
> While this might seem like a great idea, you probably cannot accomplish
>your goal this way. Any network card will actually transmit at full speed
>on
>the wire. The problem is that there is then a delay between one packet and
>the next, so the average rate drops below the theoretical maximum.
> To fix this, one needs to understand what causes this delay. A bunch of
>suspects need to be rounded up and interrogated: the Ethernet card, the
>bus it is connected to, and the CPU that drives the whole mess. Until you
>know where the bottleneck is, it is hard to know what to fix.
Agree on that.
> At 10Mb/sec, a newish CPU and PCI bus will very likely keep up with
>the net.
Nah.. I have som 486DX266/P100 with 3com509b on. ISA. And SMC Ultra
(8216*) And testing with ttcp and tcpspray (and netperf under win, not
quite as good) i get speed up to 1175 Kb/sec. 2.0.36 kernel.
The 3com-cards are favourites, the SMC-cards are a little bit slower
on receiving packets. But not much.
But introducing a pci-card (Accton Cheetah - rtl8139.c) on the P100
the speed dropped. Below 1000kb on tcp. Udp ok.
Despite PCI, i found it faster to send via one machine set up as a
bridge (linux), than sending directly via the pci-card. (tested with
win95 and netperf. I can test with ttcp too.)
+-------------------------------------------------------------+
| |
| +--------------------+ +-------------------+ |
|a |b |a |b |a |b
+--+-------+--+ +--+------+---+ +--+-----+----+
|rtl8139 3c509| |3c509 smc | | smc smc |
| | | ultra| | ultra ultra|
| (1) | | (2) | | (3) |
+-------------+ +-------------+ +-------------+
P100 Bridge 486DX2-66 486DX2-66
(1)a to (3)b
(=1pci card to a isa card)
was slower than
(1)b to (2)a to (2)b to (3)a.
(a ISA card to a ISA card to a ISA card to a ISA card)
The Accton Cheeta is a autosensing 10/100Mbps card, so it is not a
absolute waste. But on 10Mbps only, and speed, that PCI-card dont
keep up with the much older ISA 3com509b and SMC Ultra.
Mvh Vidar Andresen
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: Samba vs. NFS
Date: Sat, 24 Apr 1999 08:52:31 GMT
In article <[EMAIL PROTECTED]>,
[EMAIL PROTECTED] (Luca Filipozzi) wrote:
> In article <[EMAIL PROTECTED]>, [EMAIL PROTECTED] says...
> >
> > I have heard some horror stories about NFS. Is it safer and faster to just
> > use Samba if I want to mount a filesystem from another machine?
> >
> >
> Use NFS in unix to unix filesystem mounting. Security is a concern, but
> properly configured inetd.conf files and ipchains/ipfwadm rules will take
> care of most of those.
>
> Use Samba in unix / windows sharing of filesystems.
I don't think samba is best solution for the file sharing,
smbmount can work fine in linux box, but it can not work on
any other unix platform, so the only way to get files is smbclient.
at the same time, nfs can be shared by any one which supports it, just
like local file system.
============= Posted via Deja News, The Discussion Network ============
http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own
------------------------------
From: [EMAIL PROTECTED]
Subject: Re: Network unreachable, cable modem, 2 NICs
Date: Sat, 24 Apr 1999 08:45:08 GMT
In article <[EMAIL PROTECTED]>,
[EMAIL PROTECTED] (Pekka Savola) wrote:
> >Please help me! I cannot live without my Internet! :-)
>
> You should copy 'route -n' and 'ifconfig' when you're connected here,
> else it'll be very difficult helping you.
>
> Pekka Savola pekkas at netcore dot fi
> ---
> Across the nations the stories spread like spiderweb laid upon spiderweb,
> and men and women planned the future, believing they knew truth. They
> planned, and the Pattern absorbed their plans, weaving toward the future
> foretold. -- Robert Jordan: The Path of Daggers
>
this is my route -n:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.2 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
192.168.1.3 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
192.168.1.4 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
192.168.1.5 0.0.0.0 255.255.255.255 UH 0 0 0 eth1
158.39.17.250 0.0.0.0 255.255.255.255 UH 0 0 0 eth0
255.255.255.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 1 lo
This is my ifconfig:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0
UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1
RX packets:57 errors:0 dropped:0 overruns:0
TX packets:57 errors:0 dropped:0 overruns:0
eth0 Link encap:10Mbps Ethernet HWaddr 00:10:4B:B7:4A:58
inet addr:158.39.17.250 Bcast:158.39.17.255 Mask:255.255.255.192
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
TX packets:0 errors:0 dropped:0 overruns:0
Interrupt:11 Base address:0x100
eth1 Link encap:10Mbps Ethernet HWaddr 00:80:29:EC:70:A8
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0
TX packets:0 errors:0 dropped:0 overruns:0
Interrupt:5 Base address:0x300
============= Posted via Deja News, The Discussion Network ============
http://www.dejanews.com/ Search, Read, Discuss, or Start Your Own
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.networking) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Networking Digest
******************************
