Linux-Networking Digest #589, Volume #11 Sat, 19 Jun 99 12:13:22 EDT
Contents:
Help: Apache as firewall proxy *very* slow (RH6.0) ("John Bokma")
Re: Help: Unresolved symbols error with ipv4 modules??? (Allen Ashley)
Re: tar'ing to a NT based 4mm SCSI dat via samba? (Scott W. Petersen - N9SLA)
Samba/win98 (LinuxFool)
Re: Here's My Networking Problems (Monte Phillips)
Re: iomega ZIP drive (Chuck Snively)
How do I create a custom (Menuing) Shell? ("John Rappold")
Re: Any comments on this eth card "trick" ("Jorge Canelhas")
Win98 / Linux / Peer-to-peer / Net Connection help!! ([D] [R] [O] [Z])
Re: service unavailable? (Per Hedeland)
ppp server on RedHat 5.2 (Henry Huang)
Re: T1 help ("Dave")
Downloads make other connections crawl. (Walter Francis)
Re: PPP default routing - newbie (Clifford Kite)
Re: ipchains and ftp (Dick Repasky)
Re: iomega ZIP drive ("Gregory D. Horne")
Re: tar'ing to a NT based 4mm SCSI dat via samba? (Peter Espen)
Re: Hi, I just installed RH 6.0....now what ??? ("Bob Glover")
How do I test it ? ("Richi")
Re: E-mail programme for Linux..? (Moritz Moeller-Herrmann)
Please help: Wierd traceroute's and pings (Dave Hamilton)
----------------------------------------------------------------------------
From: "John Bokma" <[EMAIL PROTECTED]>
Crossposted-To:
comp.infosystems.www.servers,comp.os.linux.admin,comp.security.firewalls
Subject: Help: Apache as firewall proxy *very* slow (RH6.0)
Date: Sat, 19 Jun 1999 13:27:06 +0200
Hi,
I've installed RH 6.0 (Server) out of the box and modified
the Apache httpd:
ProxyPass / http://10.x.y.z
10.x.y.z is a computer connected to this firewall.
When I start Netscape on the computer, I can connect
to 10.x.y.z and everything works fine. When I connect
to the second ethernet port (externally). I get the page
but It takes a enormous amount of time.
Since I had the same problem when I tried to use
FWTK (http-gw) I am afraid that I am doing something
very stupid... Maybe something in the kernel???
Anyone?
Thanks in advance,
John
------------------------------
From: [EMAIL PROTECTED] (Allen Ashley)
Crossposted-To: comp.os.linux.misc
Subject: Re: Help: Unresolved symbols error with ipv4 modules???
Date: 19 Jun 1999 11:41:23 GMT
Ken Kwasnicki <[EMAIL PROTECTED]> writes:
>Hello,
>I've just installed SuSE 6.1 which I'm trying to configure as a firewall
>box. I did a minimal installation from CD. After I've compiled the
>kernel including all the firewall and masquerading stuff, and made and
>installed the modules I get the following errors when I run depmod -a...
>depmod: *** Unresolved symbols in
>/lib/modules/2.2.6/ipv4/ip_masq_autofw.o
>depmod: *** Unresolved symbols in
>/lib/modules/2.2.6/ipv4/ip_masq_portfw.o
>depmod: *** Unresolved symbols in /lib/modules/2.2.6/ipv4/ip_masq_mfw.o
>depmod: *** Unresolved symbols in /lib/modules/2.2.6/ipv6/ipv6.o
>depmod: *** Unresolved symbols in
>/lib/modules/2.2.6/misc/ip_masq_autofw.o
>depmod: *** Unresolved symbols in /lib/modules/2.2.6/misc/ip_masq_mfw.o
>depmod: *** Unresolved symbols in
>/lib/modules/2.2.6/misc/ip_masq_portfw.o
>What's up? Does this mean I've not installed some libraries required by
>these modules?
>Any help is greatly appreciated.
>Thanks,
>Ken.
My 6.1 version is a little different and uses 2.2.7 mods. If you go
to the web site suse.com you can find a discussion of the missing
modules, and you can download a 5.9Mb package kernmod.rpm which
contains the missing modules.
Be sure to enable IP_FORWARDING in your /etc/rc.config file. There is
a mediaone site that will help you in converting your old ipfwadm
instructions to the newer ipchains form.
Is this fun?
------------------------------
From: [EMAIL PROTECTED] (Scott W. Petersen - N9SLA)
Crossposted-To: comp.os.linux.setup
Subject: Re: tar'ing to a NT based 4mm SCSI dat via samba?
Reply-To: root@[127.0.0.1]
Date: Sat, 19 Jun 1999 11:53:29 GMT
On 18 Jun 1999 10:50:24 -0600, Peter Espen <[EMAIL PROTECTED]> wrote:
>I have a NT box and a redhat 5.2 box on a fast ethernet
>network and am already sharing filesystems via samba. I
>have a 4mm DAT on the Windows NT system via an Adaptec
>2940 SCSI interface.
>
>Is there a way for me to tar and dump on linux to the
>4mm dat on the NT system?
>
>Thanks.
>
>Peter
>--
>
>
You could have the NT backup the samba server as a network drive.
--
=========================
Scott W. Petersen - N9SLA
Elgin, IL USA
=========================
------------------------------
From: [EMAIL PROTECTED] (LinuxFool)
Subject: Samba/win98
Date: Sat, 19 Jun 1999 11:02:41 GMT
I've given up on my ppp problems for now...
I have my Linux box hooked into my network (win98), now what do I have
to do to get these machines to see one another ???
LinuxFool
------------------------------
From: [EMAIL PROTECTED] (Monte Phillips)
Crossposted-To: alt.os.linux,alt.linux,comp.os.linux.questions
Subject: Re: Here's My Networking Problems
Date: Sat, 19 Jun 1999 11:50:32 GMT
This site has a step by step howto for complete setup of samba. steps
for both linux and the win machine. (and they really work <G>)
http://www.sfu.ca/~yzhang/linux/samba/index.html
>On Tue, 08 Jun 1999, Arthur R Peale wrote:
>>I've got two computers: a K62, and a 386 I'm trying to net together,
>>just for giggles. The K62 has Win98/Linux dual-boot, and the 386 is
>>just
>>Linux (running like a champ!!!)
>>The problem stems from the Windows side not seeing the 386. I can't
>>even 'ping' it. This, of course, is no problem for the Linux side of
>>the K62.
>I ask you this now, knowledgeable ones. What am I doing wrong? I've
>>successfully done this before, on other machines (actually the K62 in
>>Linux to another in Win98) and belive I have done this the same way.
>>Could someone let me know, step by step what to do, so I can go over
>>something I may have missed?
>>Arthur R Peale
>> mailto:[EMAIL PROTECTED]
>> http://www.vermontel.com/~vengnce/shows/
------------------------------
From: Chuck Snively <[EMAIL PROTECTED]>
Subject: Re: iomega ZIP drive
Date: Fri, 18 Jun 1999 21:30:24 -0500
Gregory D. Horne wrote:
> How do you connect an iomega ZIP 100 Drive to a Linux box (parallel
> port)? You need not comment "Just plug it in." :-)
I have one of these parallel version drives and I use it for back-ups and
downloading to.
I don't know if this will work in any other version than RH 5.2.
First you must re-compile your kernel (read the KERNEL HOW-TO if you're
not sure how to) with parallel support and Iomega Zip Drive as modules.
Then you type this command: "mkdir /mnt/zip" (omitting quotes).
When you want to use the ZIP drive you type this command: "insmod ppa"
(omitting quotes)
To mount this drive, the command is: "mount /dev/sda4 /mnt/zip" -
provided the zip disk is MS-DOS formatted.
When you want to use the printer you must remove the ZIP drive module
like this:
"rmmod ppa"
And install the printer module like this:
"insmod lp"
Any other questions don't hesitate to e-mail direct to:
mailto:[EMAIL PROTECTED]
Hope this gets you on your way to using your ZIP Drive.
>
>
> I read the HOW-TO and tried the 'insmod ppa' command but to no avail.
> The HP 4L printer which is connected to the ZIP drive which in turn is
> conencted to the parallel port (LPT) works perfectly. Obviously the
> cable connectivity is good. Any solutions or suggestions?
>
> TIA.
>
> Greg
>
> "While Gates Windozed, the penguin Linuxed."
------------------------------
From: "John Rappold" <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.admin,comp.os.linux.misc
Subject: How do I create a custom (Menuing) Shell?
Date: Sat, 19 Jun 1999 08:27:41 -0400
Our VMS system allows lets certain groups of users telnet into a custom
shell that has a menuing system....they can cursor to items to start an app
or press a number.
Can someone point me in the right direction on how to setup something like
this in Linux? I'm a newbie.
Thanks,
John
===========================================
The views and/or opinions expressed in this
article are not necessarily those of the
South Central Ohio Computer Association.
Direct comments to:
[EMAIL PROTECTED]
===========================================
------------------------------
From: "Jorge Canelhas" <[EMAIL PROTECTED]>
Subject: Re: Any comments on this eth card "trick"
Date: Sat, 19 Jun 1999 13:43:00 +0100
Here's another trck, use the turbo button to connect the 2 inputs of your
powres subly (it mat need a little soldering) , ET VOILA AN INSTANT SHUTDOWN
WITH CRACKLEEEE !!!!!
Just kidding
------------------------------
From: [EMAIL PROTECTED] ([D] [R] [O] [Z])
Subject: Win98 / Linux / Peer-to-peer / Net Connection help!!
Date: Sat, 19 Jun 1999 13:10:30 GMT
Hi,
I have an internal cable modem (sux i know) and it will only work on
my Win98 machine, i also have a linux box that i am setting up right
now. I have a hub, nic cards, the whole deal, How can i connect the
linux machine to the win98 machine so that i can use the cable modem,
modem, etc... I dont really wanna use any files on the machine, but
that would be cool. For necessary purposes, the cable connection is
the most important, files and stuff, thats a plus but not needed,
thanx so much in advance
-Nick
------------------------------
From: [EMAIL PROTECTED] (Per Hedeland)
Crossposted-To: comp.mail.sendmail,redhat.networking.general
Subject: Re: service unavailable?
Date: 19 Jun 1999 13:09:37 GMT
In article <7kbd8i$kov$[EMAIL PROTECTED]> Ron Bombard
<[EMAIL PROTECTED]> writes:
>Jun 16 18:13:23 uranus sendmail[634]: SAA00632:
>to=<[EMAIL PROTECTED]>, delay=00:00:01, xdelay=00:00:01,
>mailer=relay, relay=mail.netheaven.com [198.69.28.162], stat=Service
>unavailable
That isn't much use, you need to find out why the relay
(mail.netheaven.com) refused the message - it should be in the
"transcript" section of the message that bounces back, or you can use
'sendmail -q -v' to see the SMTP dialogue.
--Per Hedeland
[EMAIL PROTECTED]
------------------------------
From: Henry Huang <[EMAIL PROTECTED]>
Subject: ppp server on RedHat 5.2
Date: Sat, 19 Jun 1999 21:30:49 +0800
Hi :
I am trying to setup a PPP dial-in server on RedHat 5.2 and encountered
some problem.
Basically I follow the document "Setting up a PPP Dial-in Server with
OpenLinux (REF #990311-0017)" from Caldera. I also reference PPP-HOWTO
(section 26. Setting up
a PPP server).
Here is a list of software I am using :
1. RedHat 5.2 (2.0.36 when I issue "uname -a")
2. ppp : 2.3.5-1
3. mgetty : 1.1.14-5
Files modified :
1. /etc/mgetty+sendfax/mgetty.config :
port ttyS1
init-chat "" AT&F&C1&D2
speed 115200
2. /etc/mgetty+sendfax/login.config
/AutoPPP/ - @ /usr/sbin/pppd +pap login
3. /etc/ppp/options :
asyncmap 0
netmask 255.255.255.0
lock
crtscts
4. /etc/ppp/pap-secrets
ppp * taiwan
5. Add the following line into /etc/inittab
S1:2345:respawn:/usr/sbin/mgetty cua1
notice that the modem is connected to com2 (i.e. cua1, ttyS1).
When I dial into the Linux server from Win95, login name and password
checking has passed and Win95 complains that "dial up network cannot
negotiate with the protocol
specified in dialup networking" (I translate this error message from
Chinese Win95. I
don't know the exact English message.)
The /var/log/messages looks like :
...
pppd[12279]: user ppp logged in
LCP : timeout sending Config-Requests
I have used ps to confirm that pppd is automatically invoked.
Can anybody advise me what it went wrong ? I guess that I don't know
set up so that a dynamic ip address can be assigned to the dial-in
client once it has passed the
pap authentication process.
Thanks.
Henry
------------------------------
From: "Dave" <[EMAIL PROTECTED]>
Subject: Re: T1 help
Date: Sat, 19 Jun 1999 05:50:03 -0400
first off sorry for the language thing i am really frustrated, yes i really
do mean a T1, this linux box is going to be a web server for my isp, i work
for them, and were hooking a direct t1 to the back of the linux box, as i
said i can do it windows just not in linux, anywhere you can steer me to a
manual would be very very helpful
kyle
Matthew P. Cummings <cummings@TRY-IT&PAYstingray.net> wrote in message
news:7kf3of$104$[EMAIL PROTECTED]...
> In article <7kdu55$sg9$[EMAIL PROTECTED]>,
> "Kyle Hittle" <[EMAIL PROTECTED]> writes:
> > how the hell do i config a T1 on redhat 5.2, please help, i can't get on
the
> > freaking net
>
> I'm going to ignore your language, it's not appropriate here, and answer
your
> question.
>
> Set your default routing to be your router. Your router is going to be
> handling all the details. As root use the linuxconf program to change the
> networking options, you'll see how when you run the program.
>
> Now, do you really mean a T1, a very expensive line that normally an ISP
has
> for the incoming feed, and then they use a terminal server to connect
> their customers to the Internet. In a nutshell, you basically come from
the TS
> to the R and then out to the Internet.
>
> ---
> Legal Warning: Do NOT send unsolicited commercial email to me - consider
this
> an official notice.
>
> cummings@TRY-IT&PAYmcmsys.com - http://www.mcmsys.com/~cummings
------------------------------
From: Walter Francis <[EMAIL PROTECTED]>
Subject: Downloads make other connections crawl.
Date: Sat, 19 Jun 1999 09:51:29 -0400
Reply-To: [EMAIL PROTECTED]
I've noticed since I installed Linux (RedHat 5.2, now using 6.0) that if
I have a FTP or HTTP transfer going, all other networking connections
seem to slow to a dead crawl.
It doesn't seem to matter what speed or amount of available bandwidth
the transfer is taking up, for instance a 1.5k/s transfer out of the
bandwidth of my 56K modem (we'll say 5K/s or so) should allow me snappy
connections, but it isn't the case. But if I start several transfers,
it's not unexpected to find that I have 3 or 4 1.5k/s transfers.
I *know* this can't be common, otherwise Apache/Linux wouldn't be so
popular! Maybe there is some networking option I am missing. I don't
think it's an interrupt priority problem, I don't notice an overall
machine slowdown, just other net connections.
Again, using Redhat 6.0, 2.2.10 kernel, PPP compiled in, using an
internal 56K modem to connect to Mindspring using PPP, usually connect
at 46666 or better.
Appreciate any suggestions..
--
Walter Francis
http://wally.hplx.net Powered by RedHat 6.0
------------------------------
From: kite@NoSpam.%inetport.com (Clifford Kite)
Subject: Re: PPP default routing - newbie
Date: 19 Jun 1999 08:55:10 -0500
Steve Willis ([EMAIL PROTECTED]) wrote:
: However, every time I dial in, the destination address is different (as
: I am connecting to one of my ISP's many dial in servers, which I cannot
: specify), and thus, I must reset the default gateway.
: What is the proper way to set up default routing for my PPP connection?
Pppd needs to have the "defaultroute" option set. There also should be
no existing default route, e.g., a default route to a LAN to which your
machine belongs. Pppd won't replace an existing default route with one
through the PPP interface even with the defaultroute option.
--
Clifford Kite <kite@inet%port.com> Not a guru. (tm)
/* Better is the enemy of good enough. */
------------------------------
From: [EMAIL PROTECTED] (Dick Repasky)
Subject: Re: ipchains and ftp
Date: 19 Jun 1999 14:09:21 GMT
Reply-To: [EMAIL PROTECTED]
ftp uses two ports, one for commands and one for data. What you need to
do is let in connections from ftp data ports. See the IPChains HOWTO for
details.
Dick
--
------------------------------
From: "Gregory D. Horne" <[EMAIL PROTECTED]>
Subject: Re: iomega ZIP drive
Date: Sat, 19 Jun 1999 10:24:34 -0400
Thanks all!
I was able to insmod imm from a command prompt and now have pass-through
capability with the Zip100 drive and HP LJ printer. BTW, I am using
Caldera OpenLinux 2.2. To prove it worked I printed a file from the Zip
drive to the printer - successful...
Greg
"Gregory D. Horne" wrote:
> How do you connect an iomega ZIP 100 Drive to a Linux box (parallel
> port)? You need not comment "Just plug it in." :-)
>
> I read the HOW-TO and tried the 'insmod ppa' command but to no avail.
> The HP 4L printer which is connected to the ZIP drive which in turn is
> conencted to the parallel port (LPT) works perfectly. Obviously the
> cable connectivity is good. Any solutions or suggestions?
>
> TIA.
>
> Greg
>
> "While Gates Windozed, the penguin Linuxed."
------------------------------
Date: Sat, 19 Jun 1999 08:36:12 -0600
From: Peter Espen <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
Crossposted-To: comp.os.linux.setup
Subject: Re: tar'ing to a NT based 4mm SCSI dat via samba?
Thanks, but I am especially looking for a way to tar to the NT
tape drive, if possible.
Peter
--
"Scott W. Petersen - N9SLA" wrote:
>
> On 18 Jun 1999 10:50:24 -0600, Peter Espen <[EMAIL PROTECTED]> wrote:
> >I have a NT box and a redhat 5.2 box on a fast ethernet
> >network and am already sharing filesystems via samba. I
> >have a 4mm DAT on the Windows NT system via an Adaptec
> >2940 SCSI interface.
> >
> >Is there a way for me to tar and dump on linux to the
> >4mm dat on the NT system?
> >
> >Thanks.
> >
> >Peter
> >--
> >
> >
>
> You could have the NT backup the samba server as a network drive.
>
> --
> =========================
> Scott W. Petersen - N9SLA
> Elgin, IL USA
> =========================
------------------------------
From: "Bob Glover" <app1rtg_at_air.ups.com>
Crossposted-To: comp.os.linux.setup
Subject: Re: Hi, I just installed RH 6.0....now what ???
Date: Fri, 18 Jun 1999 20:56:53 +0100
newbie wrote in message <[EMAIL PROTECTED]>...
>I want to use my linux box for a proxy/ip masq/modem bonding/etc.
>
>To help get me started can you answer some questions:
>
>1) what should I use ?
>
>Gnome ?
>KDE ?
>X86Free ?
>Are there any bugs in any of the above ?
Yes. Gnome is kindof buggy, but I use it and some people swear by it. It
looks kewl!
>2) I've heard of problems with Gnome's ppp, what are they ?
`:-o Oh dear, there seems to be a slight misunderstanding here. Gnome is
a grapical user interface and is related to PPP in much the same way that a
duck is related to a goldfish.
As is the case with most things in Linux, there is not just "one correct"
way to do things. Not just one method, sanctioned by the almightly
corporation on high, blessed by the clerics of the evil hoardes. Oh no!
There are usually many alternatives for any given task. Take PPP for
instance, you can use diald, pppd, kppp, and I'm sure there are others.
Oh, you wanted help didn't you (see below).
>3)The machine boots into Gnome, can that be changed ? How ?
"Yes" and "I dunno". Actually I do, but I bet you want a GUI solution
(being a newbie), and in that case...I dunno.
Come to think of it, this is a can of worms. If you mean that it boots to a
graphical login screen, that says run-level 5 to me. If that's what you
mean and if you want to switch to a text-based login, type: init 3
You could type 'init 5' to switch back. There's alot more to this than what
I just said, but I don't want to write a book, so I'll just cut myself off
here. Try comp.os.linux.x, there is alot of traffic on that group. I'm
sure you'll get an answer there, but see below first.
>4) Can I set up my ip masq, etc in X, or do I need to edit files
>manually ?
You need to work out the forwarding/masquerading rules (interactively) and
then put them in a script file somewhere. The command you're looking for is
ipchains if you have a 2.2.x kernel, otherwise use ipfwadm (see below).
>Thank you for helping a newbie
Ahhh, newbie help eh?
(This is what I wanted you to see)
Your best and closest-at-hand resources for help are the man pages. For
help on built-in shell commands try help <command>, otherwise man <command>
or man <config file> will do.
Then there are the HOWTO documents on the CD-ROM (these are also on the FTP
sites) in one of the the documentation directories. There are also
mini-HOWTO's in a directory beneath the grown-up HOWTO's.
There are HOWTO's for networking, IP Masqerading, etc.
Sometimes you'll find additional/alternative documentation in
/usr/doc/name-of-application-whatever-it-is
One of the best web-based resources is www.deja.com. Go ahead, try it. In
case you don't know it has a great number of newsgroups archived. You can
often find the answer to your problem (without having to wait) by starting
there. Please look there first.
Also try this URL:
http://metalab.unc.edu/mdw/
You should also get a beginners Linux book too. "Linux Unleashed" got me
started. It was a bumpy start, but I got started.
Good luck and don't fear the Penguin!
------------------------------
From: "Richi" <[EMAIL PROTECTED]>
Subject: How do I test it ?
Date: Sat, 19 Jun 1999 09:59:47 -0500
I have two Netgear ethernet cards in my Linux machine. I want to hook my
Cisco router up to one and use the machine as a internet gateway which I
have been doing with PPP until the DSL line got hooked up.
I am assuming this is the right order to make things happen
1) Make both cards eth0 and eth1 work on the LAN (to test)
2) Get the Linux machine to access the internet
3) Make sure my IP masquerading is working like it did before.
I realize there is some tricks to using dual cards. I added a line to my
Lilo.conf file that says append = " ether =10,0xec00,eth0
ether=3.0xe800,eth1"
When it starts it says bringing up eth0 and bringing up eth1 but hangs at
sendmail for just a few seconds. I thought this usually meant there was
something wrong with your network connection when this happens...
When I get into X Windows I ping another machine on the LAN it works. When I
switch the cable to the other ethernet card it does not work until I disable
them and reinable them. Is this an improper test procedure ? How should I
test the ethernet cards to make sure they work before I move on to step two
and try to make the DSL line work?
Thanks in advance for your help.
Rich
You can also mailto:[EMAIL PROTECTED]
------------------------------
From: [EMAIL PROTECTED] (Moritz Moeller-Herrmann)
Subject: Re: E-mail programme for Linux..?
Date: Sat, 19 Jun 1999 12:42:12 +0200
Reply-To: [EMAIL PROTECTED]
On 17 Jun 1999 13:36:25 GMT, Jonathan Guthrie <[EMAIL PROTECTED]> wrote:
>Andrew Wedding <[EMAIL PROTECTED]> wrote:
>> Other than the normal text-based e-mail programmes that come with Linux (ie
>> elm and pine) is Netscape the only (best) e-mail programme with HTML
>> capabilities? What programmes does everyone else use?
kmail from KDE
--
Moritz Moeller-Herrmann [EMAIL PROTECTED] ICQ# 3585990 # Not only
Get my public pgp / gpg key from # Open Source(TM)
http://webrum.uni-mannheim.de/jura/moritz/pubkeymoritz # but also
KDE forever! Use Linux to impress your friends! # Open Minded!
------------------------------
From: Dave Hamilton <[EMAIL PROTECTED]>
Subject: Please help: Wierd traceroute's and pings
Date: Sat, 19 Jun 1999 15:07:50 GMT
Ok... I'm at a loss... and something's NOT right. I'm running RedHat
6.0 with the "RedHat Approved" kernel 2.2.5-22 on a dual Pentium 100
Dell machine with 48MB of RAM. I have two 3C509 ethernet cards in the
machine, one connected to a cable modem using the modified dhcpcd
client for RoadRunner, and the other assigned a static "IANA-reserved"
address connected to my home network. I have set up ipchains to
perform masquerading tasks and it all seems to work just fine.
However, when I traceroute or ping from the linux machine DIRECTLY, I
get VERY strange results, i.e:
PING www.sprint.net (208.27.196.10): 56 data bytes
64 bytes from 208.27.196.10: icmp_seq=0 ttl=243 time=-969.-8 ms
64 bytes from 208.27.196.10: icmp_seq=1 ttl=243 time=68.8 ms
64 bytes from 208.27.196.10: icmp_seq=2 ttl=243 time=63.8 ms
64 bytes from 208.27.196.10: icmp_seq=3 ttl=243 time=41978.7 ms
64 bytes from 208.27.196.10: icmp_seq=4 ttl=243 time=69.6 ms
64 bytes from 208.27.196.10: icmp_seq=5 ttl=243 time=67.9 ms
64 bytes from 208.27.196.10: icmp_seq=6 ttl=243 time=69.2 ms
64 bytes from 208.27.196.10: icmp_seq=7 ttl=243 time=72.0 ms
64 bytes from 208.27.196.10: icmp_seq=8 ttl=243 time=67.5 ms
64 bytes from 208.27.196.10: icmp_seq=9 ttl=243 time=78.4 ms
64 bytes from 208.27.196.10: icmp_seq=10 ttl=243 time=69.5 ms
64 bytes from 208.27.196.10: icmp_seq=11 ttl=243 time=41984.6 ms
--- www.sprint.net ping statistics ---
12 packets transmitted, 12 packets received, 0% packet loss
round-trip min/avg/max = -969.-8/6968.3/41984.6 ms
Very strange. This happens whether I've loaded my ipchains rules or
not, so I don't think it has to do with them. The strange thing, of
course, is that when I do the same ping from my Mac or Windows machines
inside the network, they work FINE and give "normal" results to
traceroutes and pings.
Any thoughts?
Please help!
-Dave
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.networking) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Networking Digest
******************************
