Linux-Networking Digest #770, Volume #11 Sat, 3 Jul 99 13:13:27 EDT
Contents:
web-based Linuxconf - how do I redesign it? ([EMAIL PROTECTED])
RE: apache localhost (Upali Weerasinghe)
Linux boxes lose connection to network (Dustin Tenney)
Re: 2.2.10 upgrade => broken networking (Dave Warner)
Re: Still not having any luck... (Clifford Kite)
Re: Dial-up Authentication, Network Access... (Clifford Kite)
Re: laptop network config ("z. w.")
Re: laptop network config ("z. w.")
IP Addressing Question ("Drew M. Mooney")
Re: linux as router to self - colo setup (John Bell)
adduser and slow start ("Lee")
Re: innd ("Gero H. Marten")
Irregular CTRL-C Freezes on 2.2.10 with ping/tcpdump ([EMAIL PROTECTED])
One linux box, multiple domain names ? (Isaac Wilcox)
Re: PPP over Ethernet SW (Raj Rijhwani)
Re: DHCP flooded cable network!! ("Ed Davis")
Combo cards - coax or 10bT ("Drew M. Mooney")
Re: Could Microsoft Cheat On The New Mindcraft Benchmark? (Anthony Ord)
PPP connect: ping & traceroute but no data?? (Paul and Linda Hardin)
----------------------------------------------------------------------------
From: [EMAIL PROTECTED]
Subject: web-based Linuxconf - how do I redesign it?
Date: Sat, 03 Jul 1999 11:41:54 GMT
Hi there,
I think Linuxconf is great, but the web-based interface
isn't exactly pretty. Functional, but ugly. So I'd like
to redesign it (and possibly include some 'wizards') for
it.
My only question is,... how!?!
One option I suppose is to write a script to attempt to
work out what each form does what and use that as a reference.
But that is not only long-winded, but if the creators of
linuxconf change a form I'd have to re-write it!
Bit of bizarre post (and perhaps one that should have been
asked on whatever linuxconf newsgroups there are).
Cheers in advance,
Oliver B. Tupman
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.
------------------------------
From: Upali Weerasinghe <[EMAIL PROTECTED]>
Subject: RE: apache localhost
Date: Sat, 03 Jul 1999 12:53:24 GMT
I mean this sign "#" that is your prompt.
try #ping localhost;
if not #ping 127.0.0.1
working or not ? no
#ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:4520 errors:0 dropped:0 overruns:0 frame:0
TX packets:4520 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Can you see that
good thats mean you loopback is working now you havr set /etc/hosts
like this:
127.0.0.1 localhost localhost.localdomain
save your hosts file and
#ping localhost
PING localhost (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=0.3 ms
64 bytes from 127.0.0.1: icmp_seq=1 ttl=255 time=0.2 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=255 time=0.1 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=255 time=0.1 ms
if you see above everything on network side working
goback to your netscape or Lynx do http://localhost
if not Read NET3-howto in /usr/doc
good luck
UPali Joe
------------------------------
From: Dustin Tenney <[EMAIL PROTECTED]>
Subject: Linux boxes lose connection to network
Date: 2 Jul 1999 19:24:36 GMT
I am having a really strange problem with linux just losing connection to
our network. We have about five linux boxes on our network. At one time
all of them have had this problem. Every once in a while the box will
just disappear from the network. You can get to it if your on the same
subnet, but no one else can. The packets do get to the router, but then
it would appear the router doesn't know about that ip anymore. If you can
log into the box and send one packet to anywhere but itself it re-appears
to the world. The arp cache on the box has the routers address and the
router's cache also has the boxes address. The box is plugged into a 3com
switch and we are using a cisco router. All the boxes have a intel
etherexpress pro 10/100. The ethernet is definatly setup correctly on all
these machines. We have struggled with this for a while and can't find
anything out of the ordinary. We have lots of other machines on the
network that have no problems.
Would anybody know what could cause this to happen? Thanks for any info.
--
Dustin Tenney
[EMAIL PROTECTED]
http://www.icebox.org/~tenney
------------------------------
From: [EMAIL PROTECTED] (Dave Warner)
Subject: Re: 2.2.10 upgrade => broken networking
Date: 3 Jul 1999 13:48:35 GMT
Reply-To: [EMAIL PROTECTED]
Did both. The problem has to be more fundamental since even ping
doesn't work; I think ping is wire -> kernel -> inetd -> kernel -> wire,
and maybe even inetd isn't involved.
[EMAIL PROTECTED] wrote:
> Dave Warner <[EMAIL PROTECTED]> scribed to us that -
> >Thanks Paul, but I don't think that's it. I miswrote when I said "stock
> >RH5.2 system". I should have said "stock RH5.2 kernel". I am up to date
> >with all of the packages listed on the site you mentioned.
> >
>
> You may have to reinstall the vmware modules to use them with the new
> kernel. Also if you want to use samba, then make sure samba support is
> in the kernel when you compile it.
> --
> Mist.
--
Dave Warner
Lucent Technologies, Inc.
+1-303-538-1748
------------------------------
From: kite@NoSpam.%inetport.com (Clifford Kite)
Subject: Re: Still not having any luck...
Date: 3 Jul 1999 09:41:52 -0500
Daniel Mitchell ([EMAIL PROTECTED]) wrote:
: Okay, I tried all the stuff you guys suggested and I think I'm very close to
: getting it to work, but there all still a few problems. I'm trying to start
: PPP from a command prompt like this:
: pppd /dev/ttyS2 115200 debug user <username> connect "chat -v '' ATD<phone
: number> CONNECT ''"
Try replacing CONNECT '' with CONNECT '\d\c' to introduce a one second
delay and supress a carriage return that is otherwise send and sometimes
confuses the ISP. It's also possible that the ISP needs something else
entered to start PPP there or is at a menu that's used for the same purpose.
If the simple fix doesn't work then use minicom to see what's going on.
--
Clifford Kite <kite@inet%port.com> Not a guru. (tm)
/* Editing with vi is a lot better than using a huge swiss army knife. */
------------------------------
From: kite@NoSpam.%inetport.com (Clifford Kite)
Subject: Re: Dial-up Authentication, Network Access...
Date: 3 Jul 1999 09:35:44 -0500
Chad Osgood ([EMAIL PROTECTED]) wrote:
: I have a 3 machine network that I have setup to clone my development
: environment at work. I have a Linux box, an NT box, and a 98 box. I would
: like to configure my Linux box to accept incoming calls and to authenticate
: that user onto my network. I'm sure after which I will be able to setup
Here's a link that should help:
http://www.swcp.com/~jgentry/dialin2.html
--
Clifford Kite <kite@inet%port.com> Not a guru. (tm)
/* Microsoft is a great marketing organization.
* It _has_ to be */
------------------------------
From: "z. w." <[EMAIL PROTECTED]>
Subject: Re: laptop network config
Date: Sat, 03 Jul 1999 10:32:41 -0400
==============0F558C4A29055BB699E58EE5
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
==============0F558C4A29055BB699E58EE5
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
Hi, Andrey,
<br>I checked the /etc/resolv.conf.
<br>It is
<br>search baruch.cuny.edu
<br>nameserver 128.228.1.10
<br>
<p>Andrey Smirnov wrote:
<blockquote TYPE=CITE> <font color="#000000"><font size=-1>Did you
configure your machine with DNS? What is the content of your
/etc/resolv.conf?</font></font>
<font size=-1>Good luck!</font>
<blockquote
style="BORDER-LEFT: #000000 solid 2px; MARGIN-LEFT: 5px; PADDING-LEFT: 5px">z.
w.<[EMAIL PROTECTED]> wrote in message <<a
href="mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED]</a>>...
<br>
<p>Hi,
<br>I just installed RH6.0 on my laptop. The network card I have is 3C574TX,
which is not support by RH6.0. I downloaded the pcmcia-cs-3.0.13.tar.gz
from David Hinds and followed the HowTo to install. I reboot the machine
and found the card by dmesg. I configed it using by adding hostname, gateway,
etc. I rebooted the machine and try ftp, telnet. I still get error: Hostname
lookup failure. Can anyone help out with this question?
<p>Thanx.
<pre>--
_________________________
Zheng Wang
Tel: 212-802-6276
Fax: 212-802-6253</pre>
</blockquote>
</blockquote>
<pre>--
_________________________
Zheng Wang
Tel: 212-802-6276
Fax: 212-802-6253</pre>
</body>
</html>
==============0F558C4A29055BB699E58EE5==
------------------------------
From: "z. w." <[EMAIL PROTECTED]>
Subject: Re: laptop network config
Date: Sat, 03 Jul 1999 10:39:21 -0400
==============B2C5F4E1C6C88C3E6A98259A
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
Eric LEMAITRE wrote:
> Hi, Eric, Thank you for your help.
I tried what you told me. I moved S45pcmcia to S08pcmcia.
But when I run setup, I was not given a choice to disable DNS service. When
I run hostname, I get:
I get hinkley.baruch.cuny.edu
which is correct.
In the /etc/hosts, I have
127.0.0.1 localhost localhost.localdomain
150.210.1.101 hinkley.baruch.cuny.edu hinkley
I did not do the third part.
After all these, it still does not work.
>
>
> Hi !
>
> You might make many things :
> _ go to "/etc/rc.d/rc3.d/" and move "S45pcmcia" to "S08pcmcia" : force
> PCMCIA network card to load BEFORE network services.
> _ type "setup" and disable "named" (DNS) service, then check that your
> hostname (command "hostname") corresponds to what you find in
> "/etc/hosts", like "127.0.0.1 -> localhost, laptop -> 192.168.15.2, by
> example.
> _ Reserve interrupts like "03, 05" for system use, leaving others (09,
> 10, 11) for PCMCIA device by editing "/etc/pcmcia/config.opts" or
> "/etc/pcmcia/sysconfig/pcmcia", I don't remember which.
>
> This should much help, Linux usually works perfectly on laptops.
>
> Bye !
>
> --
> Responsable de formation pour les fili�res Internet et Linux
--
_________________________
Zheng Wang
Tel: 212-802-6276
Fax: 212-802-6253
==============B2C5F4E1C6C88C3E6A98259A
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Eric LEMAITRE wrote:
<blockquote TYPE=CITE>Hi, Eric, Thank you for your help.</blockquote>
I tried what you told me. I moved S45pcmcia to S08pcmcia.
<br>But when I run setup, I was not given a choice to disable DNS service.
When I run hostname, I get:
<br>I get hinkley.baruch.cuny.edu
<br>which is correct.
<br>In the /etc/hosts, I have
<br>127.0.0.1 localhost localhost.localdomain
<br>150.210.1.101 hinkley.baruch.cuny.edu
hinkley
<p>I did not do the third part.
<p>After all these, it still does not work.
<blockquote TYPE=CITE>
<p>Hi !
<p>You might make many things :
<br>_ go to "/etc/rc.d/rc3.d/" and move "S45pcmcia" to "S08pcmcia" : force
<br>PCMCIA network card to load BEFORE network services.
<br>_ type "setup" and disable "named" (DNS) service, then check that your
<br>hostname (command "hostname") corresponds to what you find in
<br>"/etc/hosts", like "127.0.0.1 -> localhost, laptop -> 192.168.15.2,
by
<br>example.
<br>_ Reserve interrupts like "03, 05" for system use, leaving others (09,
<br>10, 11) for PCMCIA device by editing "/etc/pcmcia/config.opts" or
<br>"/etc/pcmcia/sysconfig/pcmcia", I don't remember which.
<p>This should much help, Linux usually works perfectly on laptops.
<p>Bye !
<p>--
<br>Responsable de formation pour les filières Internet et Linux</blockquote>
<pre>--
_________________________
Zheng Wang
Tel: 212-802-6276
Fax: 212-802-6253</pre>
</html>
==============B2C5F4E1C6C88C3E6A98259A==
------------------------------
From: "Drew M. Mooney" <[EMAIL PROTECTED]>
Subject: IP Addressing Question
Date: Sat, 3 Jul 1999 11:15:56 -0400
Reply-To: "Drew M. Mooney" <[EMAIL PROTECTED]>
I'm in the process of interconnecting system lans between two customer
locations, and have a concern over IP addressing with two of them.
System A is basically a standalone LAN [actually a bunch of UNIX boxes that
support a wireless telecomm system] that we've connected to our customer's
LAN by dual homing the gateway machine. "Remote" access used to be limited
to dialup - now customer users can access all hosts via the dual-homed
gateway.
backbone network 198.175.182.0 [plain old class C]
all A hosts use 198.175.182.2 as their default gateway
the gateway host is dual-homed:
198.175.182.2 on eth0
172.22.0.141 on eth2 mask 255.255.255.240
bcst 172.22.0.143
the gateway host uses 172.22.0.129 [network 172.22.0.128's router] as its
default route.
Name service on 198.175.182.0 hosts is provided by /etc/hosts.
We have not implemented DNS or any other service.
DNS is used on the 172.22.0.128 [and associated subnets] net.
System B [this is the possibly tricky part] is also what used to be a
stand-alone LAN that we've connected to our customers network.
Network architecture [number, type, and function of hosts] is an exact
duplicate of network A. To simplify technical support from offsite, we
typically use standardized host IP addresses when deploying these networks.
So network B is also on 198.175.182.0, AND host IPs on the network are
duplicates of network A's functional equivalents.
All network B hosts use 198.175.182.2 as default gateway.
Gateway host is dual-homed:
198.175.182.2 on eth0
172.22.15.141 on eth2 mask 255.255.255.240
bcst 172.22.15.143
Gateway host B uses 172.22.15.129 as default route.
Name service on the 198.175.182.0 hosts is /etc/hosts.
DNS is used on 172.22.15.128 network [and associated subnets].
Network 172.22.15.128's router connects to router in remote city [Network
A's home] via 56k DDS.
Questions:
1. Do we need to renumber one of the 198.175.182.0 networks to avoid
confusion amongst the users [and routers] that live in the 172.22.0.0
domains?
Or....
2. Can we resolve potential confusion by merely assigning unique hostnames
to NetworkA and NetworkB hosts, and let /etc/hosts and DNS sort it all out
for themselves? [at present, the "standardization" between NetA and NetB
applies to hostnames _and_ IP addresses]
TIA to all respondents.
-Drew
------------------------------
From: John Bell <[EMAIL PROTECTED]>
Subject: Re: linux as router to self - colo setup
Date: Sat, 03 Jul 1999 10:12:02 -0500
Reply-To: [EMAIL PROTECTED]
Rich Roth wrote:
>
> (BTW, if you want a challege there is an NT box next to our linux box
> that is doing this fine (different but similer set of IP addresses
> but since NT is so visual we can't make sense out of the routing table.)
>
???
Open up a CMD.EXE shell on NT. Run the 'route' command.
Read what it says about the routing table. Mimic :-).
--
John Bell - [EMAIL PROTECTED] - http://www.vignette.com
Sr. System Administrator - Vignette Corporation
Parturiunt montes, nascetur ridiculus mus. - Horace
------------------------------
From: "Lee" <[EMAIL PROTECTED]>
Subject: adduser and slow start
Date: Sat, 3 Jul 1999 09:30:13 -0600
Hi all,
2 questions.....I have a P75 with 48 meg ram and RH 5.2
My first question involves the adduser command
I do adduser -r username -p password, but i cant login or telnet in using
any of the usernames I have created.....can anyone tell me the proper
switches?
The other is when booting linux. I see all the commands roll by, but my
computer suts on the "sendmail" one for two or three minutes. Is this
normal? o or did I set something up wrong?
Lethal
[EMAIL PROTECTED]
------------------------------
From: "Gero H. Marten" <[EMAIL PROTECTED]>
Crossposted-To: redhat.config,redhat.networking.general
Subject: Re: innd
Date: Sat, 03 Jul 1999 13:49:25 +0200
Serge Interesnov wrote:
> I can't setup innd, where i can find documentation (other then man) on
> innd for RedHat 5.9.
> [EMAIL PROTECTED]
Have a look at <http://www.blank.org/innfaq/>
--
Gero H. Marten
<http://www.provi.de/gmarten/index.html>
--
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To: comp.os.linux.misc
Subject: Irregular CTRL-C Freezes on 2.2.10 with ping/tcpdump
Date: Sat, 03 Jul 1999 15:38:15 GMT
I'm running into some weird behavior on the new 2.2.10 version of Trinux
I develop (a ramdisk version of Linux)
Control-C fails to stop the ping command or tcpdump. Unfortunately
it doesn't do it all the time. Actually, right now it only appears to
be doing it on tcpdump.
Here are some possible explanations?
* this is a terminal problem, possibly with the termcap library
* this is raw socket problem perhaps an incompatiblity between tcpdump
and 2.2.10 (I get an error message: tcpdump uses obsolete (PF_INET,
SOCK_PACKET)
* I'm forgetting to compile something in the kernel
* It is somehow related to the ramdisks because using the same kernel on
a real (non-ramdisk) box it works fine
I know these are kind of out there, but this one has really got me
stumped (and its really annoying, too)
-mdf
Trinux: A Linux Security Toolkit
http://www.trinux.org
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.
------------------------------
From: Isaac Wilcox <[EMAIL PROTECTED]>
Subject: One linux box, multiple domain names ?
Date: Sat, 03 Jul 1999 16:56:30 +0200
I have a virtual server account which has one IP address and multiple
domain names mapped to it through DNS. Apache is successfully set
up to serve content from different directories based on the domain name
by which the server is accessed.
What I'd like to do is mirror this on my home linux box so that I can
test different setups, scripts, databases etc. without having to be
online.
So how can I set up my linux box to do this - to have several names
so that Apache can serve different content to each ?
Thanks in advance,
Isaac Wilcox
------------------------------
From: [EMAIL PROTECTED] (Raj Rijhwani)
Crossposted-To: comp.protocols.ppp,comp.unix.bsd.freebsd.misc
Subject: Re: PPP over Ethernet SW
Date: Sat, 03 Jul 99 15:27:43 GMT
Reply-To: [EMAIL PROTECTED]
In article <[EMAIL PROTECTED]>
[EMAIL PROTECTED] "Lew Pitcher" writes:
> There were some questions recently (in the last couple of months) about
> PPP-over-ethernet in the comp.dcom.lans.ethernet newsgroup. Judging from
> the responses in that ng, there *is* something that does PPP-over-ethernet.
> Heavens knows why.
So one can carry other protocols over an IP network?
--
Raj Rijhwani (umtsb5/16) | This is the voice of the Mysterons...
[EMAIL PROTECTED] | ... We know that you can hear us Earthmen
[EMAIL PROTECTED] | "Lieutenant Green: Launch all Angels!"
http://www.courtfld.demon.co.uk/raj/ (demon, and gods, willing...)
------------------------------
From: "Ed Davis" <[EMAIL PROTECTED]>
Subject: Re: DHCP flooded cable network!!
Date: Sat, 03 Jul 1999 16:07:57 GMT
Thank you for your replies.
There are 2 NIC cards in the linux machine, one for the cable company
connection, the other for the
home segment, a 192.168.1.x address. I could set the cable NIC to a static
IP also as they do not change it often. only twice in 1 year. They did
reorder the IP address assignment the day I supposedly caused them trouble.
I suspect that there may have been other problems as I found out people were
still having trouble getting an IP address a day after they shut me off. I
wll write them a letter asking why people were still having trouble gettting
an address 24 hours after they shut me off and see if I can get the logs.
Ed
------------------------------
From: "Drew M. Mooney" <[EMAIL PROTECTED]>
Subject: Combo cards - coax or 10bT
Date: Sat, 3 Jul 1999 11:22:27 -0400
Reply-To: "Drew M. Mooney" <[EMAIL PROTECTED]>
How do you tell linux which media to use on a combo card if it can't sort it
out for itself?
Cards in question are both 3Com 509b ISA and some off-brand PCI combos.
[that work fine configured as NE2000 PCI]
They both appear to default to 10bT, and I've got a coax backbone to support
in a couple of days.
TIA
-Drew-
------------------------------
From: [EMAIL PROTECTED] (Anthony Ord)
Crossposted-To:
omp.os.ms-windows.nt.advocacy,comp.os.linux.advocacy,comp.infosystems.www.servers.unix,comp.os.linux.misc
Subject: Re: Could Microsoft Cheat On The New Mindcraft Benchmark?
Date: Sat, 03 Jul 1999 16:40:15 GMT
On Thu, 1 Jul 1999 11:44:00 -0700,
[EMAIL PROTECTED] ("Bob Taylor") wrote:
>In article <7lfucc$9j0$[EMAIL PROTECTED]>,
> [EMAIL PROTECTED] writes:
>> In comp.os.linux.misc "Bob Taylor" <[EMAIL PROTECTED]> wrote:
>> = And how do you know this actually happened? Were you present? You read
>> = it in a book written by an American hater? On behalf of the Americans
>> = who died saving your sorry ass in WWII, I *demand* a retraction and
>> = appology for such a vicious attack!
>>
>> Who are you to *demand* anything?
>
>You falsely accused Americans of brutality.
No. He didn't say anything. I said it. It is not a false
allegation. Do you want to hear the story?
>> More to the point, I really wish the US lusers would stop it with the "We
>> pulled your ass(sp) out of the fire in WWII" bollocks.
>
>Look, you insufferable ass, the people of the US build the worlds
>largest and most successful economy. Our farmers feed the US
>population and 25% of the rest of the world. The American people
>freely give of their time and money to those less fortunate.
>
>Now as to WWII, why don't you do some research and a little thinking?
>
>> The USA was *supposedly* an ally from BEFORE the war...
>> So, Mr Taylor... What year was the start of WWII again??? 1939? Or 1942?
>> WHERE WERE YOU LOT THEN?
>
>The overwhelming opinion of the Americans prior to Hitler was to stay
>out of European squabbles. There was also laws against involvement.
>
>Exactly *what* do you define WWII as? The war against Germany began
>when Britain and France declared war. As far as I am concerned, WWII
>began when the US declared war on Japan and Germany declared war on
>the US.
So what was it before that date? A bun fight?
>> And don't come back with any balls about the US helping to rebuilt the
>> infrastructure in Britain with lots of money, because those were LOANS,
>> which we paid back and owe you NOTHING on that anymore.
>
>American money rebuilt Europe under the Marsall Plan. I Have *no* use
>whatsoever for revisionist historians. They are an insult to
>history. I also have little use and absolutly *no* respect for people
>who spread lies about my country and my people. Most especially
>vicious ones such as these.
Be sure. Be very sure.
Regards
Anthony
--
=========================================
| And when our worlds |
| They fall apart |
| When the walls come tumbling in |
| Though we may deserve it |
| It will be worth it - Depeche Mode |
=========================================
------------------------------
From: Paul and Linda Hardin <[EMAIL PROTECTED]>
Subject: PPP connect: ping & traceroute but no data??
Date: Sat, 03 Jul 1999 09:20:56 +0000
Reply-To: [EMAIL PROTECTED]
Hi,
I'm running ppp on my linux box and connect to my isp just fine. DNS is
working, I can traceroute and ping by name or ip.
However, when I telnet, ftp, or use a browser I get all the 'connected
to host' messages but no data. For ftp and telnet this means no
'username' prompt while netscape leaves me at 'waiting for data'.
I have been unable to even determine what level of networking to look at
to begin debugging. So, whether you have 'the answer' or not, I would
love to hear some musings on my problem.
thanks in advance,
Paul Hardin
[EMAIL PROTECTED]
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.networking) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Networking Digest
******************************
