Linux-Networking Digest #218, Volume #12 Sat, 14 Aug 99 00:13:38 EDT
Contents:
IMAP clients for linux (Chetan Ahuja)
Re: Kostenabrechnung der Internetnutzung =?iso-8859-1?Q?f=FCr?= Intranet (Lindoze
2000)
Re: How to configure two 3c509 network cards? (Vidar Andresen)
programming serial io (ingmar meins)
HYMEN! www.hymen-photo.com 3568 ([EMAIL PROTECTED])
Re: IP Masquerading -Step by Step using Ipchains ("Scott Simpson")
Re: mounting filesystem from another computer (ingmar meins)
Re: KDE for Redhat 6.0 (ellis)
Re: DNS (Roy Grimm)
Re: FTP - I don't want an anonymous account ("Dennis M. Ott")
Re: Cable Modem & hub (Lawrence Bacon)
Re: Disallowing telnet access for one specific account (DanH)
Re: setting N/W after insallation of Redhat6.0 (Rick McDaniel)
Routing ("Jean-Reginald Louis")
IPMasq and network printing - problems... ("Sunil P. Khatri")
ICMP not working (Monz)
Re: Help to Install Network Drivers (Jon Akers)
Re: How do I set up IPX only interface ("Sean W. Ellis")
Re: How do I set up IPX only interface ("Sean W. Ellis")
Re: Sendmail Problems ("Sean W. Ellis")
Re: I'm going mad!!!! over a Microcom Deskporte 28.8P External Modem ("Khan Md
Ashraf")
ACT OF DEFLORATION! 3231 ([EMAIL PROTECTED])
Re: ipmasqadm error ("Lordaerom")
Re: IMAP clients for linux (Kaz Kylheku)
Re: how to setup up 2 or 3 network cards in Red Hat 6? (Howard Mann)
ipmasqadm error ("Douglas J. Olivier")
Re: Routing ("Phil")
----------------------------------------------------------------------------
From: [EMAIL PROTECTED] (Chetan Ahuja)
Crossposted-To: comp.os.linux.x,comp.os.linux.development.apps,comp.windows.x.kde
Subject: IMAP clients for linux
Date: 14 Aug 1999 01:49:34 GMT
Hi,
Apart from huge and lumbering Netscape and text only pine, what's a
good (preferably GUI) IMAP client for Linux.... I have long held the idea
that open source IMAP clients for linux are very hard to find. Don't get me
wrong, I like pine but sometimes I need to convince other people who are
moving from windows etc and a nice spiffy looking GUI client which takes
less than a a minute to start on most machines ( so netscape is out ) would
really help. Also pine's way of handing attachments etc is less than perfect.
And as far as I know, Mozilla is not yet usable for the general public.
A KDE client will be nice. The built in mailer for KDE doesn't handle IMAP
(yet?). Does anybody know whether anybody is working on such a client. I will
be willing to help with my modest skills any way I can. It may also a good idea
create some sort of a basic open source backend for IMAP mailers which can
then be plugged into any GUI interface that people might be using ( Xt, Qt,
GTK etc... ) It might even be ripped from pine sources ( if license allows )
or the ongoing Mozilla work (if it doesn't force one to ship huge libraries
with it) Any ideas/suggestions...
Chetan
--
------------------------------
From: Lindoze 2000 <[EMAIL PROTECTED]>
Subject: Re: Kostenabrechnung der Internetnutzung =?iso-8859-1?Q?f=FCr?= Intranet
Date: Fri, 13 Aug 1999 22:32:33 -0400
��������������
Manfred Constapel wrote:
>
> Lars Grenzend�rfer schrieb in Nachricht ...
> >Ich habe eine Linux-Server laufen, der das Intranet mit dem Internet �ber
> >ein Modem (per dial on demand) verbindet. Gibt es eine M�glichkeit die
> >Verbindung mit dem Internet (bzw. meinem Provider) zu protokollieren? Da
> ich
> >die ganzen Internetkosten habe, m�chte ich sie auf diejenigen verteilen,
> die
> >das Internet nutzen. Ich mu� wissen, wann wer f�r wie lange im Internet
> war,
> >um eine Kostenabrechnung zu erstellen. Das Protokoll sollte nicht unbedingt
> >weitere Daten enthalten, da es ansonsten un�bersichtlich werden w�rde. Gibt
> >es Software die dies bew�ltigt? Falls ja, wo kann ich sie finden und wie
> >konfiguriert man sie?
> >
> >
> >Danke.
> >
> > Lars
> >
> >
>
> Hallo hall�chen...
>
> Hm, a German man with german language in an English News?! Nun, was solls...
>
> Ok, unter Linux kann man doch mit IP-Messgrading �berpr�fen, wer wann was
> gemacht hat (aufgrund des Logins)... allerdings kann ich da keine weiteren
> Infos geben aufgrund mangelnder Erfahrung...
>
> Alternativ k�nnte man aber doch auch einen NT-Server mit WinGate laufen
> lassen, um dieses Problem zu erschlagen...
>
> Ciao,
>
> Manfred
--
Thank you for your valuable input. Your useful answers will benifit
other users as well.
You are Linux!
########################################################
## ##
## My Experiment ##
## http://www.FusionPlant.com ##
## ##
########################################################
------------------------------
From: [EMAIL PROTECTED] (Vidar Andresen)
Subject: Re: How to configure two 3c509 network cards?
Date: Fri, 13 Aug 1999 21:57:23 GMT
In article <[EMAIL PROTECTED]>,
M O'Neill <[EMAIL PROTECTED]> wrote:
>Okay, so the recommendations are to turn off PnP,
To turn off pnp on the nic itself (3com 509b, that is) with the 3com
setup disk found at 3com. _May_ be needed. (It dont harm, so I do).
Then setting the nic to a sensibel __unused__ value like irq10 and io
like 300 in the dos setup. Should be enough.
But, to be even more sure where the nic is positioned, in motherboard
bios to then set irq10 to 'legacy isa', to set 'boot with pnp-os' (or
similar) to 'off'.
soundcard, scsi, anythingh wich poses a treath to that position, how
to handle it.. ('cat /proc/interrupts' an 'cat /proc/ioports' for a
start.)
> and make additions to
>both conf.modules and lilo.conf.
No. Not at all.
If driver loaded as module:
I wondered what linuxconf produced in /etc/conf.modules. (and
_If loaded as module_, /etc/conf.modules is the place to look,
and set values. Irq only, i belive. (and maybe tranceiver)
Seems like the 509 dont need 'io=' value, and complain when given
that.
If compiled into the kernel:
The kernel search for _one_ nic at startup, automagic, and when
found, it goes on. If several nic's is to be loaded, the kernel
must be told so, an going via lilo is one way to do that. That
mean the kernel at boot is told to look for more than one nic,
either autoprobing, that is looking into several places the nic
can be, and when found, activating it. This, from a
/etc/lilo.conf:
image = /boot/vmlinuz-2.0.36
label = 8
append = "ether=0,0xf480,eth0 ether=10,0x300,eth1"
root = /dev/hda8
image = /boot/vmlinuz-2.0.36
label = 81
append = "ether=0,0,eth0 ether=0,0,eth1"
root = /dev/hda8
Have a label named '8' wich search for two nic's in given
position. The label '81' search for two nics in all places the
nic is probed for. (somewhere there is a list over in which
adresses nics are probed for, if the nic is not there, it will
not be found by the '81' label.
But that will only work if the nic's driver is compiled into the
kernel. It will not work if the nic is compiled as a module, and not
into the kernel.
That is why I wrote:
>> (There is no sense in setting any value in lilo.conf if driver not
>> compiled into kernel.)
> What different steps, if any, are needed
>when you want to install a 2nd NIC that is a different type/model? -m
If the kernel-version you are running have the drivers kompiled into
the kernel, the lilo-thing.
If the kernel-version you are running have the drivers kompiled as
modules, check /lib/modules/"your-kernel-version"/net/. If the module
for your nic is there you will have to get it loaded some way or
another.
It can be '/sbin/insmod nic-driver.o' (with your own nic-driver, and
what it demands of options, that is) or...
Linuxconf offers a frontend, a GUI, for that prosess. Please try it.
(And please turn off in your editor/browser/newsagent what makes it
posting a copy in mail when you respond to a news posting in a
newsgroup.)
Mvh Vidar Andresen
------------------------------
From: ingmar meins <[EMAIL PROTECTED]>
Subject: programming serial io
Date: Sun, 15 Aug 1999 12:18:27 +1000
HELP!
I'm trying to write some routines to communicate with my Casio QV10
camera via /dev/cua0. I've read the Serial Programming HowTo and got the
basics of throwing characters out to the camera and getting data back
using read(fd..... . I believe I have the serial I/O set to
non-canonical and raw mode. What is annoying me is figuring out how to
actually control the handshake line (DTR, CTS etc) manually.
Do you use ioctl( or some other black magic ?? Any suggestions such as
"go read document xyz" would be appreciated.. I'm new to Linux
programming but have done quite a bit in multiple languages in the DOS
environment (+ others) over the years.
Using Mandrake 6.0 / Kernel 2.2.9-19mdk on an AMD350 / 64mb.
Thanks,
Ingmar
(VK2KEQ)
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To:
comp.os.linux.hardware,comp.os.linux.m68k,comp.os.linux.misc,comp.os.linux.powerpc,comp.os.linux.setup,comp.os.linux.x,comp.os.lynx,comp.os.mach,comp.os.magic-cap
Subject: HYMEN! www.hymen-photo.com 3568
Date: 13 Aug 1999 06:51:54 GMT
szfljewnidscnyzskefhkgyfklhtnzytkylmihlswyogvpkmci
begin 644 C:\subj1\act.htm
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F;W)D97(](C`B/CPO83X\+W`^#0H\+V)O9'D^#0H\+VA
F;W)D97(](C`B/CPO83X\+W`^#0H\+V)O9'D^#0H\+VA
------------------------------
From: "Scott Simpson" <[EMAIL PROTECTED]>
Subject: Re: IP Masquerading -Step by Step using Ipchains
Date: Fri, 13 Aug 1999 19:00:30 -0700
Ferdinand V. Mendoza <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]...
> I need a link that could point me to
> to a good procedure in configuring
> IP masquerading using IP chains
> in Redhat 6.0.
I have an example at http://home.earthlink.net/~simpson3 that uses ipfwadm.
You'll have to do the (probably trivial) translation to ipchains yourself.
My site also discusses IP masquerading.
------------------------------
From: ingmar meins <[EMAIL PROTECTED]>
Subject: Re: mounting filesystem from another computer
Date: Sun, 15 Aug 1999 12:44:51 +1000
I assume you got in and "exported" the / (root) directory or similar using
the utils in NETCONF.
Then the mounting on the other end should work fine, also assuming you did
not set any special privileges when doing the export.
Did you specify the name of the client machines that will be connecting to
this share ?
On the export screen in netconf on the server called yoda I have:
Path to export: /
Comment: Full access to server.
Client name: matty
[X] May Write
[X] Root priv.
Then on the machine called matty I have the following line in /etc/fstab:
yoda:/ /mnt/yoda nfs rsize=8192.wsize=8192,timeo=15,intr
I just type mount yoda and that's it...
Regards
Ingmar
[EMAIL PROTECTED] wrote:
> Hi all
>
> Can anyone tell me how to mount one machine's filesystem to another's?
> Like i have wks1.nowhere.net with /dev/hda1 and /dev/hda2 and i'd like to
> mount hda1 onto wks2.nowhere.net's /mnt directory. I tried to modify the
> /etc/fstab file on wks2, i added the following line:
>
> $IP:/remote/dir /local/dir nfs defaults,ro,auto 0 0
>
> But the remote machine rejected me. What privileges do i have to set on
> each machine? Do i have to be root on both machines or just on the local?
>
> thanks in advance
> Bufi
>
> +---------------------------------+
> | Why not go out on a limb? |
> | Isn't that where the fruit is?? |
> +---------------------------------+
------------------------------
From: [EMAIL PROTECTED] (ellis)
Crossposted-To: comp.os.linux.development.system,redhat.servers.general
Subject: Re: KDE for Redhat 6.0
Date: 13 Aug 1999 22:13:16 GMT
In article <7p1o8u$hnn$[EMAIL PROTECTED]>,
Sunil <[EMAIL PROTECTED]> wrote:
>I am looking for KDE for linux head hat 6.
Doesn't KDE come with 6.0? On ftp.redhat.com in
/redhat/redhat-6.0/i386/RedHat/RPMS I find:
kdeadmin-1.1.1pre2-1.i386.rpm
kdebase-1.1.1pre2-2.i386.rpm
kdegames-1.1.1pre2-2.i386.rpm
kdegraphics-1.1.1pre2-1.i386.rpm
kdelibs-1.1.1pre2-2.i386.rpm
kdemultimedia-1.1.1pre2-1.i386.rpm
kdenetwork-1.1.1pre2-1.i386.rpm
kdesupport-1.1.1pre2-1.i386.rpm
kdeutils-1.1.1pre2-1.i386.rpm
And more in the updates directory.
--
http://www.fnet.net/~ellis/photo/linux.html
------------------------------
From: Roy Grimm <[EMAIL PROTECTED]>
Subject: Re: DNS
Date: Fri, 13 Aug 1999 16:06:07 -0500
[EMAIL PROTECTED] wrote:
>
> Can someone give me a summary of the configuration of DNS on redhat 5.2?
http://metalab.unc.edu/LDP/HOWTO/DNS-HOWTO.html
------------------------------
From: "Dennis M. Ott" <[EMAIL PROTECTED]>
Subject: Re: FTP - I don't want an anonymous account
Date: Fri, 13 Aug 1999 18:40:47 -0400
>
> If you're running redhat: "rpm -e anonftp"
>
If you're not running redhat, you basically just need to delete the ftp
user account (from /etc/passwd and delete the ftp user's home
directory).
Without the stuff in ~ftp/bin ~ftp/etc ~ftp/lib etc., anonymous logins
aren't going to work.
dott
------------------------------
From: Lawrence Bacon <[EMAIL PROTECTED]>
Subject: Re: Cable Modem & hub
Date: Fri, 13 Aug 1999 22:28:08 GMT
Tad wrote:
>
> Yes. We use the Motorola cable modem with our hub. You have to use the
> uplink port on the hub, though, unless you have a cross-over cable.
>
> Tad
Thanks for the info.
Sorry for the late reply @home strikes again.
Larry
------------------------------
From: DanH <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.security
Subject: Re: Disallowing telnet access for one specific account
Date: Fri, 13 Aug 1999 18:44:35 -0400
Cornel Popescu wrote:
>
> In article <[EMAIL PROTECTED]>,
> [EMAIL PROTECTED] (Robert Nichols) wrote:
> > In article <[EMAIL PROTECTED]>,
> > David <[EMAIL PROTECTED]> wrote:
> > :We have a linux machine that acts as a gateway with a DSL and an FTP
> > :server. There is ne specific account that only some folks have
> access
> > :to. This account is obviously a generic account but in order to have
> > :ftp access the shell has to be something such as bash. Due to the
> > :generic nature of the account and the fact that it has a shell, I
> would
> > :like to disable telnet access for just that one account without
> > :disabling telnet. Does anyone know how or if this is possible?
How about in your /etc/hosts.allow
ALL EXCEPT in.telnetd: username@ALL
hosts.deny
in.telnetd: username@ALL
play with it until it works, but you get the idea.
Dan
--
UNIX - Not just for vestal virgins anymore
Linux - Choice of a GNU generation
------------------------------
From: Rick McDaniel <[EMAIL PROTECTED]>
Subject: Re: setting N/W after insallation of Redhat6.0
Date: Fri, 13 Aug 1999 22:30:48 GMT
Also if using redhat. Type netcfg in a shell. This will bring up the
network congfiguator. You can do everything from there too.
Rick
�Ѱ�ȣ wrote:
>
> My lan card is 'intel etherexpress pro/+10' and I installed Redhan6.0 on
my
> PC.
> I skipped setting the Network configuration when I installed Linux .
> I intended to set it after installation Linex.
> I'd just thought I could set on a panel such as contorl panel in wondows
95,
> but there is no control panel and I can't find any other function to set
up
> Networm environment.
> Please help me...
> Thanks in advance for your help.
>
>
================== Posted via CNET Linux Help ==================
http://www.searchlinux.com
------------------------------
From: "Jean-Reginald Louis" <[EMAIL PROTECTED]>
Subject: Routing
Date: Fri, 13 Aug 1999 23:05:15 -0400
I read some online text on routing but there something I can't understand.
Why each client on a network most specified the address of a gateway. I read
that when someone send a packet on the network, everydoby see it, but only
the receiver with the valid ip keep the packet and read/process it. So, for
example, if host A1 want to send a packet to host A2 on the other network,
the gateway just have to take this packet and send it to the other network
(this is how I understand). So why put the ip address of the gateway on a
host? Host just send packet and 'which' that the other host receive it?
------------------------------
From: "Sunil P. Khatri" <[EMAIL PROTECTED]>
Subject: IPMasq and network printing - problems...
Date: Fri, 13 Aug 1999 23:17:10 GMT
Folks,
I have installed IP Masquerading on my home linux box, on a
2.0.30 kernel. The configuration is as shown below:
______ _______
192.168.0.3------| | | |
| | | Local |
192.168.0.2------| HUB |----------------| GW |---------
local machines | | 192.168.0.1 | | w.x.y.z
192.168.0.4------|______| |_______|
The IP masq setup commands I used are as follows:
ipfwadm -M -s 7200 10 160
ipfwadm -F -p deny
ipfwadm -F -a m -S 192.168.0.0/24 -D 0.0.0.0/0
All local machines work fine when it comes to running ftp, ssh,
netscape etc.
There are several local machines (192.168.0.x). The local
gateway is connected by cable modem, and has address
192.168.0.1 (local part) and w.x.y.z (the address given by the
cable modem company). All machines are Linux machines.
The problem is that when 192.168.0.2 attempts to print to a
networked printer (whos server's address is a.b.c.d). When
I do a "lpq", I get an error message "/usr/bin/lpd : Malformed
Any idea why this is the case? Any help is appreciated..
Thanks bunches,
Sunil
------------------------------
Date: Fri, 13 Aug 1999 22:18:58 -0400
From: Monz <[EMAIL PROTECTED]>
Subject: ICMP not working
I have a linux server and pinging (or traceroute) from it to another
machine fails. Other machins can ping or traceroute to (but not through
it, it forwards between two subnets). Everything else works fine,
connections to and from it can be made without problem. Also pinging my
intel printserver from this server causes the the printserver to crash,
however it can print to it fine. Any ideas? Linux version is 2.2.11
(2.2.10 tried also with same results)
------------------------------
From: Jon Akers <[EMAIL PROTECTED]>
Crossposted-To:
alt.linux,comp.linux,comp.os.linux.hardware,comp.os.linux.network,comp.os.linux.redhat
Subject: Re: Help to Install Network Drivers
Date: Fri, 13 Aug 1999 15:09:38 -0700
Ed wrote:
> I have recently installed Redhat 5.2 and i'm having a problem installing my
> network drivers. I have a realtek 8029 Pci network card and the only linux
> drivers i have are on a windows formatted disk.
>
> Could someone please tell me how i can install these drivers from the disk
> as i'm unable to download them from the internet.
>
> Thanks
>
> Ed
> [EMAIL PROTECTED]
>From what I remember, the Realtek 8029 PCI should work fine with the standard
linux NE-2k drivers.
------------------------------
From: "Sean W. Ellis" <[EMAIL PROTECTED]>
Subject: Re: How do I set up IPX only interface
Date: Fri, 13 Aug 1999 10:18:53 -0500
Matt Graham wrote:
>
> All of the IPX utilities require the interface to be up. The only way to
> bring them up is with IP.
> Don;t see how this is possible without hacking the source.
>
No, you can have the interface active without any protocols bound to
it. This is usually used in a bridge situation.
instead of using ifconfig to place IP numbers, etc. simply say ifconfig
eth0 up
sean [EMAIL PROTECTED]
------------------------------
From: "Sean W. Ellis" <[EMAIL PROTECTED]>
Subject: Re: How do I set up IPX only interface
Date: Fri, 13 Aug 1999 10:17:37 -0500
zombie-m wrote:
>
> I am trying to set up an IPX only network interface(eth1) on a ne2000
> (compatible - no name card) with no TCP/IP. Is this possible? If so,
> could someone tell me how, or point me in the direction of some useful
> information? I have already read the IPX HOWTO. I am looking for
> information more along the lines of actually configuring the interface.
>
> --
> Morgan
> [EMAIL PROTECTED]
>
> Sent via Deja.com http://www.deja.com/
> Share what you know. Learn what you don't.
ifconfig eth0 up
ipx_interface add eth0 0x00000001 1
done
Sean [EMAIL PROTECTED]
------------------------------
From: "Sean W. Ellis" <[EMAIL PROTECTED]>
Subject: Re: Sendmail Problems
Date: Fri, 13 Aug 1999 10:20:52 -0500
Lederhaas Horst wrote:
>
>
> 3.) how can i configure sendmail when somebody send a mail to
> "[EMAIL PROTECTED]"
> that it stored to "lederhaas.horst" and forward it to "[EMAIL PROTECTED]" ?
in /etc/aliases on seidel.at
lederhaas.horst: [EMAIL PROTECTED]
Then, run sendmail again.
Sean
[EMAIL PROTECTED]
------------------------------
From: "Khan Md Ashraf" <[EMAIL PROTECTED]>
Subject: Re: I'm going mad!!!! over a Microcom Deskporte 28.8P External Modem
Date: Sat, 14 Aug 1999 08:24:00 +0530
Hi,
I understand your frustration. What are you running ? Red Hat, Caldera,
Debian etc. In my experience I am having trouble running kppp under RedHat
6.0. Earlier I ran RedHat 5.2 and ran kppp under KDE without a hitch. This
is what I did. Start KDE. Run kppp. In the dialog that comes up click setup.
>From this point it is pretty intuitive. You can set your com port and then
query the modem. If your modem lights dance your on a roll. But if it
doesn't then first run a dmesg|more command at your prompt and check for any
messages. Then check your modem and make sure it is working. Next establish
that your com ports are in order. If it still doesn't work get in touch with
a linux geek.
Bye
Ashraf
dude <[EMAIL PROTECTED]> wrote in message
news:7p2b9j$4jg$[EMAIL PROTECTED]...
> Here's the pitch:
>
>
> Can someone please, please, please help me set this up.I've used
> setserial -a -g (even tried autoconfig) to probe the ports and can't find
a
> damn thing. I've used kppp(?- I think that's what it's called) to try and
> find the modem but it tells me that either it can't find anything or it's
> busy. How do I get the info on the parallel ports? Is the parallel port
what
> external modems use? Or is it some com port? I've probed ttyS0-3 and my
> modem is not there. I tried the same with cua0-3, same result nothing.
Tried
> setserial on lp0 and got an error. All I ask is to be able to surf IN
linux
> to learn it. I don't think this is to much to ask, do you? Since I've been
> inside linux( the Xgui-Gnome-works fine, all my drives are there and
> mountable, my sound card is working;-)-see, I HAVE been reading the mans-)
> I've come to realize it's potential and when I boot Win98 I feel
> so........closed in, restricted.....well, I can't really DO anything, it's
> all done for me whether I like it or not, linux is cool, I NEED to learn
> but, I've been reading mans for 5 days and still my modem is not
en:-( I
> read the modem HOWTO at least 480 times and the setserial HOWTO is never
to
> be forgotten. I've thrown the useless peice of paper it was printed on out
> 'cause I will rely soley on the burned in imprint upon my poor battered
> brain. I've been going to bed at 5 or 6:00 a.m. and getting up at 9 or 10:
> a.m. for at least forever. Linux is a great woman but boy is she ever
> demanding. She sucks my will and drains my energy at every turn, but,
aren't
> all wild rides the best? I'm going insane.......I have nightmares about
ppp0
> and kppp and cua0 the worst are the lp0's they haunt even my waking
> moments.....please for the love of sanity(mine) someone help me..........)
> Thank You.
>
>
> Jon
>
>
------------------------------
From: [EMAIL PROTECTED]
Crossposted-To:
comp.os.linux.development.apps,comp.os.linux.development.system,comp.os.linux.hardware,comp.os.linux.m68k,comp.os.linux.misc,comp.os.linux.powerpc,comp.os.linux.setup,comp.os.linux.x
Subject: ACT OF DEFLORATION! 3231
Date: 13 Aug 1999 14:27:07 GMT
ACT OF DEFLORATION! www.hymen-photo.com
vgcnrppjlwjvdrpdcnjniunedlthqmfmydrentfqkpkxfkogeerneqbjmqnvlrudmbiwkyuewz
begin 644 C:\subj1\act.htm
M/&AT;6P^#0H-"CQH96%D/@T*/'1I=&QE/DYE=R!086=E(#(\+W1I=&QE/@T*
M/&UE=&$@;F%M93TB1T5.15)!5$]2(B!C;VYT96YT/2)-:6-R;W-O9G0@1G)O
M;G1086=E(#,N,"(^#0H\+VAE860^#0H-"CQB;V1Y/@T*#0H\<#X\82!H<F5F
M/2)H='1P.B\O=W=W+FAY;65N+7!H;W1O+F-O;2(^/&EM9R!S<F,](BXN+U)E
M:VMO;B]D969L;W(N:G!G(B!W:61T:#TB,3DT(@T*:&5I9VAT/2(R-C,B(&%L
M=#TB06-T(&]F(&1E9FQO<F%T:6]N(2!W=W<N:'EM96XM<&AO=&\N8V]M(B!B
F;W)D97(](C`B/CPO83X\+W`^#0H\+V)O9'D^#0H\+VA
F;W)D97(](C`B/CPO83X\+W`^#0H\+V)O9'D^#0H\+VA
------------------------------
From: "Lordaerom" <[EMAIL PROTECTED]>
Subject: Re: ipmasqadm error
Date: Sat, 14 Aug 1999 03:38:02 GMT
I can't remember if my problem was the same, and if this is even, necessary,
but I recall portfw not working, I recompiled my kernel, selecting any
options that sounded like they had anything to do with port forwarding and
it worked.
Dunno if that's it though, or if I got the exact same error, it was a couple
months ago.
--Lordaerom
Douglas J. Olivier <[EMAIL PROTECTED]> wrote in message
news:i02t3.15200$[EMAIL PROTECTED]...
> Anyone ever encounter this type of error ?
>
>
> frankie:/home/doug# ipmasqadm portfw -a -P tcp -L 24.218.79.16 80 -R
> 192.168.1.2 80
> portfw: setsockopt failed: Invalid argument
>
>
------------------------------
From: [EMAIL PROTECTED] (Kaz Kylheku)
Crossposted-To: comp.os.linux.x,comp.os.linux.development.apps,comp.windows.x.kde
Subject: Re: IMAP clients for linux
Date: Sat, 14 Aug 1999 03:06:28 GMT
On 14 Aug 1999 01:49:34 GMT, Chetan Ahuja <[EMAIL PROTECTED]> wrote:
>
> Hi,
> Apart from huge and lumbering Netscape and text only pine, what's a
> good (preferably GUI) IMAP client for Linux.... I have long held the idea
>that open source IMAP clients for linux are very hard to find. Don't get me
>wrong, I like pine but sometimes I need to convince other people who are
>moving from windows etc and a nice spiffy looking GUI client which takes
Why do you think than an IMAP client also has to have an interface for browsing
mail?
The fetchmail program may be an alternative for you. It will pull mail from an
IMAP account and deliver it to a local mailbox. You can then use any mail
program to browse the mail locally, including one that doesn't have IMAP
support. For example, exmh. It's one ugly piece of TCL programming, but it's
robust.
The nice thing about fetchmail is that it works in the background. It's as
though your machine were getting a live e-mail feed.
------------------------------
From: Howard Mann <[EMAIL PROTECTED]>
Subject: Re: how to setup up 2 or 3 network cards in Red Hat 6?
Date: 14 Aug 1999 03:50:45 GMT
In article <7p2hib$dsu$[EMAIL PROTECTED]>,
"geofox" <[EMAIL PROTECTED]> writes:
> hi,
> any doc. or howto to solve my problem?
> any ideas is welcome!
>
> Thanks,
> geofox
>
http://metalab.unc.edu/LDP/HOWTO/Ethernet-HOWTO-3.html#ss3.2
http://cesdis.gsfc.nasa.gov/linux/misc/multicard.html
Cheers,
--
Howard Mann
http://www.newbielinux.com
(a LINUX website for newbies)
Smart Linuxers search at: http://www.deja.com/home_ps.shtml
------------------------------
From: "Douglas J. Olivier" <[EMAIL PROTECTED]>
Subject: ipmasqadm error
Date: Fri, 13 Aug 1999 19:34:36 -0400
Anyone ever encounter this type of error ?
frankie:/home/doug# ipmasqadm portfw -a -P tcp -L 24.218.79.16 80 -R
192.168.1.2 80
portfw: setsockopt failed: Invalid argument
------------------------------
From: "Phil" <[EMAIL PROTECTED]>
Subject: Re: Routing
Date: Fri, 13 Aug 1999 20:49:15 -0700
The basics are - A host is only able to communicate directly with other
hosts on the same network segment that it is on. The host doesn't know how
to communicate with a host on another network or network segment. When a
host is given an address to communicate with that is outside it's network
segment, it sends the packet to the gateway address. The gateway ( router)
will be able to determine a way (route) to forward the packet to the remote
host or another router. The packet moves from router to router (switches,
too) until it's delivered to the network segment that the receiving host is
on.
Hope this helps a little.
Phil
Jean-Reginald Louis <[EMAIL PROTECTED]> wrote in message
news:E05t3.796$[EMAIL PROTECTED]...
> I read some online text on routing but there something I can't understand.
> Why each client on a network most specified the address of a gateway. I
read
> that when someone send a packet on the network, everydoby see it, but only
> the receiver with the valid ip keep the packet and read/process it. So,
for
> example, if host A1 want to send a packet to host A2 on the other network,
> the gateway just have to take this packet and send it to the other network
> (this is how I understand). So why put the ip address of the gateway on a
> host? Host just send packet and 'which' that the other host receive it?
>
>
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.networking) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Networking Digest
******************************
