neil t wrote:
>
> greetings and again tnx for the help---
>
> >I copied an installation guide for Debian Woody 3.0, but it seems to be
> >geared to setting up a server. I just want regular install. I did use it
> >as a guide when I first installed Debian, and it did seem to work, but I
> >did have to tweak it a bit. (any suggestions for a better installation
> >guide?)
Are you looking for a better Debian Woody 3.0 regular install
than the one you copied? Which one did you copy?
>
> >When I installed it, I made a boot floppy and it worked ok, but was very
> >slow.
>
> >>>>>"Slow" and "fast" are in the eye of the beholder, so your telling me >>>>>this
>is "very slow" in your opinion doesn't let me know if you are describing the normal
>speed of floppy-based boots or a system with a problem.
>
> I was describing booting from the floppy disk....
>
> >>Getting the "lingo" down is less important then being careful about your
> descriptions. For example, after noting at the beginning of this message
> that you'd previously made a "typo", you continue to misname "lilo.conf"
> "lilo.config" (unless Mandrake really does use a different name for this
> file ... I know Debian still calls it lilo.conf). When asking for
> configuration help, accurate reporting of the details is essential.
>
> whoops! yes it is "lilo.conf" !
But you never mentioned running /sbin/lilo !!
> Ok, so I guess if I install Debian 3.0 or even Red Hat again, it will replace my
>existing bootloader but I will still have the option to make Mandrake the default.
>This is determined when I edit /etc/lilo.conf.
...and run /sbin/lilo.
Debian/Red Hat/Mandrake are not boot loaders, per se.
Perhaps those three distributions use the same boot loader. (?)
You do not need to do an 'install' to change|alter a boot loader.
The issue is not from which distribution a boot loader is re-written,
it is what bootable partitions can be selected from the boot loader
when the system is next booted. (?)
> Is there a standard format for adding other linux distro's to /etc/lilo.conf? One
>of replies to my question explains it this way:
>
> "It does not really make any differance which system installed lilo, the
> secret is mounting all your disks/partitions where "lilo" can
reach them all in one go, you can define any partition "in use
or not" as long as it is mounted.
^^^^^^^^^^^^^^^^^^^^^^^^
<snipped to end>
So,
if all the partitions you want to choose to boot from are mounted,
run /sbin/lilo.
HTH, Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
