Ronald: This response may not be quite what you're looking for, but then again, maybe it will be helpful. The system you describe is what I would think of as a "survpc", i.e., an outdated computer that won't efficiently run alot of newer software or OS's. Maybe you're using it to sort of "test the (Linux) waters", and don't intend to do much productive with it. If so, you may be able to get the latest Red Hat to install on it, though I'd guess you'll have to do some tweaking, as you seem to have discovered already. I'm not sure about the network card problems you're having and how to resolve them, but another issue you'll likely confront is the need to set up a swap partition right away because of low memory. The RH install routine probably does this for you more or less automatically. However, if you're intending to really use this machine for useful things, the latest RH may not be the best way to go. For one thing, it probably requires a minimum of something like 1.5 GB of disk space: if your machine's HD is contemporaneous with the rest of its hardware, you may not have enough disk space to install RH. Even if you do, there may be very little space left over for furthe enhancements. I've been through this attempt to install more modern distros on older hardware pretty extensively recently: it can be a real headache. All this is to conclude by saying that there are distributions that are much more effective for older hardware than the latest RH, and ones that can give you a quite useful system that functions with reasonable speed, in about 300-500 MB and with the other hardware you have. If you need further information on which distro(s) I'm talking about, just let me know and I'll be glad to provide it.
James >===== Original Message From "Ronald Hahm" <[EMAIL PROTECTED]> ===== >I am trying to install RedHat 8.0 on a Pentium 100 Mhz machine. So far >I am not having too good of luck. Here are the specs of the machine. > >Zeos Pantera >Pentium 100 >BusLogic SCSI Card >NEC SCSI CDROM >2.5 Maxtor IDE drive >32 MB RAM >3c515 Ethernet Card (2) > >I am having problems with the installation when it needs a driver disk. >If I try to do a network installation it needs a driver disk for the >3c515 ethernet card. > >These are the errors messages that I get during the installation. > >"Failed to mount driver disk." >"The floppy disk you inserted is not a valid driver disk for this >release of Red Hat Linux." > >Can someone get me feedback or a workaround as to how I can get Red Hat >8.0 installed on this machine? > >Thanks. > > > >- >To unsubscribe from this list: send the line "unsubscribe linux-newbie" in >the body of a message to [EMAIL PROTECTED] >More majordomo info at http://vger.kernel.org/majordomo-info.html >Please read the FAQ at http://www.linux-learn.org/faqs - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
