This is really a distro-specific issue I'm having, but the place I'd
nomrally turn for help (Freesco forums) is currently down and has been for
at least a couple of weeks now. Not having any idea when the forums might
be functioning again, I thought I'd post a query here in hopes that some
general information I could get here might help resolve the problem. The
problem is with a Freesco router I've set up on an old machine (P180 24MB
RAM) and with error messages I get when trying to enable the dhcp server
that is built in to Freesco (hitherto I've used static addressing with
this router, and it has worked just fine). Anyway, when I enable the dhcp
server, then enter an address pool range in the appropriate setup dialogue
for the relevant interface, I get the following message during boot/setup:
starting dhcp /etc/dhcpd.conf line 4 expecting parameter or declaration
umask
^
configuration file errors encountered -- exiting
And, of course, the dhcp server doesn't run and doesn't make dhcp offers
(that's my understanding of why my computers that are configured to
request IP by dhcp fail to set up the interface when connected to this
router/firewall). Here is my /etc/dhcpd.conf file, in case that might
offer some clues:
option domain-name "mynet";
default-lease-time 604800;
max-lease-time 6004800;
umask 22 /etc/dhcpd.leases
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.10 192.168.1.20;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.1.255;
option routers 192.168.1.1;
option domain-name-servers 192.168.1.1,134.48.25.32;
}
The file was copied and pasted here, so there really are 2 spaces between
"umask" and 22 and 22 and /etc. I thought perhaps the problem may lie
with an extraneous space being added and an inability to therefore process
what follows (22 - whatever that does). I can't really edit this file to
find out though, since it gets dynamically written each time the computer
boots or restarts.
So, does anyone see here any obvious source for the problem I'm
encountering in getting the dhcp server to run and offer leases? Thanks
for any input on this.
James
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
