Hi Richard, I was able to build it. But while, boot up it is giving the error message init not found.
Thanks Amrith On Wed, 20 Oct 2004 07:40:47 +0200, Richard Adams <[EMAIL PROTECTED]> wrote: > On Wednesday 20 October 2004 05:52, kernel kernel wrote: > > Hi Richard, > > Thanks for your fast response. > > > > I am furnishing the following details. > > Motherboard : Intel 865 > > Processor : P4 2.4GHz > > SCSI : Samsung Hard disk > > > > I am trying to use 2.6.8 kernel from the GNU (downloaded from kernel.org) > > You said your problem was; > > "While booting with 2.6.8 kernel. giving error no ata_piix module found" > > Now you say you have a SCSI disk, the two are completly different, > With SCSI its now the disk type which needs a driver but your SCSI controler. > It will also need to be compiled into the kernel and NOT as a module. > > Simply choose the needed driver with 'make config' or 'make menuconfig' > recompile the kernel install it and update your bootloader then reboot. > > You are being to vauge to help precisely, please learn to explain your > problem(s) better. > > > Thanks > > Amrith > > -- > > > If the Linux community is a bunch of thieves because they > try to imitate windows programs, then the Windows community > is built on organized crime. > > Regards Richard > [EMAIL PROTECTED] > http://people.zeelandnet.nl/pa3gcu/ > > - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
