Rajat Jain wrote:
Hi List,
I want to change the PCI Configuration space of a particular device in
my system. I am trying to use the "pcitweak" utility to do so, but am
not suceeding. I would appreciate if some body could provide me any
pointers in how to do so.
In this case, I want to change the value at offset 64:
$ pcitweak -r 5:9:1 64
0x01000001 //original value
$ pcitweak -w 5:9:1 64 0x02000002 //new value
$ pcitweak -r 5:9:1 64
0x01000001 //no change?
TIA,
Rajat Jain
(This response is limited to linux-newbie, although
there should be a better list-server for this depth of a problem.)
Hi, Rajat Jain:
Sorry, I cannot help. Just for fun, I used pcitweak, scanpci, lspci,
and 'cat /proc/pci' and looked at my two rtl8139 ethernet cards. I
think I found that they have 256 bytes of memory; one card uses memory
0x3e014000 - 0x3e140ff or 0x100 bytes.
(cat /proc/pci |grep -A 1 -B 4 ealtek)
pcitweak read 32 bits (4 bytes) so
pcitweak 0:9:0 -r 0
would show bytes offset 0, 1, 2, & 3.
pcitweak 0:9:0 -r[-w] 64 [value]
would read[write] bytes offset 64, 65, 66, 67
or 0x100, 0x101, 0x102, 0x103
which is undefined. There might be no memory at byte offset 64.
I also used pcitweak 0:9:0 -r 4096, which I assume is outside the
configuration space of my pci device, but pcitweak dutifully displayed
output. :-|
Hopefully you are not writing to ROM. :-|
Good luck,
Chuck
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
