okay,
sorry about not giving enough info...here goes
1. i used the chat prgram and here are the msgs i got out of
/var/log/messages
kernel : CSLIP code copyright 1989
kernel : PPP ver 2.2.0 dynamic channel Allocated
kernel : PPP Dynamic channel allocation
kernel : PPP line discpline registered
kernel : registered device ppp0
pppd[402] : pppd 2.2.0 started by root, uid 0
chat[403] : timeout set to 3 seconds
chat[403] : abort on busy
chat[403] : abort on no answer
chat[403] : abort on ringing \r\n\r ringing
chat[403] : send (rAT^M)
chat[403] : expect (OK)
chat[403] : rAT^M
chat[403] : OK --got it
chat[403] : send (ATH0^M)
chat[403] : timeout set to 30 seconds
chat[403] : expect OK
chat[403] : ^M
gated[157] : Event Delete UpDown lo 127.0.0.1
gated[157] : Event Add lo 127.0.0.1
chat[403] : ATDT isp#
chat[403] : Connect -- got it
chat[403] : send (^M)
chat[403] : expect (login:)
chat[403] : 24000/ARQ/V34/LAPM/V42BIS^M
chat[403] : ^M
chat[403] : ^M
chat[403] : login:-- got it
chat[403] : send (userid^M)
chat[403] : expect (password:)
chat[403] : ^M
chat[403] : login: userid^M
gated[157] : Event Delete UpDown lo 127.0.0.1
gated[157] : Event Add lo 127.0.0.1
gated[157] : Event Delete UpDown lo 127.0.0.1
gated[157] : Event Add lo 127.0.0.1
chat[403] : Password:
pppd[402] : Comment script failed
chat[403] : alarm
chat[403] : failed
chat[403] : exit
2. the options in my options file is only lock...but in the ppp-on
script it has the following
exec /usr/sbin/pppd debug lock modem crtscts /dev/ttyS2 57600 /
id did have /dev/modem in here first..but i took the card out and
set the jumpers manual...it is a plug and play modem.
3. you notice that gated[157] : Event Delete UpDown lo 127.0.0.1
gated[157] : Event Add lo 127.0.0.1 occur alot in the messages..i have
over a thousand lines of just these two for a few hrs of uptime
is this okay?
4. is this enough info? i think the script is not sending my password
thanks..
-------- Original Message --------
Subject: Re: ppp not working
Date: Mon, 22 Mar 1999 08:02:52 -0800
From: Ray Olszewski <[EMAIL PROTECTED]>
To: Stephen A Jones Jr <[EMAIL PROTECTED]>,linux stuff
<[EMAIL PROTECTED]>
OK, suggestions:
1. How are you trying to make the PPP connection? With minicom &/or
seyon?
That's the hard way, and tricky to get right ... the timing on starting
pppd
is touchy. Much better to use a real PPP dialer like chat, if you're not
doing that now.
2. If you are using chat or diald or something similar, take a look at
your
log (usually /var/log/messages) and see what chat (or whatever) and pppd
are
reporting about the attempt. If you can't figure this out yourself, post
a
followup that includes ALL the log messages from one attempt.
3. Also tell us what your pppd options look like -- could be in
/etc/ppp/options or on the command line that calls pppd (from a script
like
/usr/sbin/ppp-on).
Sorry to be so vague, but your question was pretty vague, and there are
a
lot of ways to set up PPP on a Linux system, so I and others can't
really
guess which one you are using.
At 03:12 AM 3/22/99 -0600, Stephen A Jones Jr wrote:
>hello,
> i have a dual boot machine 95 and redhat5.0. my ppp connection work
>find under win. but not in linux. i went through the book and set up the
>scripts and tried minicom andseyon programs. i can dial to the isp,
>connect , and get all that stuff on the screen..but then nothing
>happpens, and i get disconnected. i thought after i used redhats control
>panel to set up the interface i would have ppp in the kernel.. but i can
>not ping my dns server..
------------------------------------"Never tell me the odds!"---
Ray Olszewski -- Han Solo
762 Garland Drive
Palo Alto, CA 94303-3603
650.328.4219 voice [EMAIL PROTECTED]
----------------------------------------------------------------
